Skip to content

Super Edition
Compare
Choose a tag to compare
@supermerill supermerill released this 02 Jun 19:21
· 7740 commits to master since this release
2.2.51
f8c41fe

A 2.2.51.2 version is available (fix various bugs) linux & macos build may arrive, when i'll find a solution for compiling without destroying boost quota.
A 2.2.51.1 version is available (fix two bugs)

new & changes

  • Rename of the project. (I may rename it again in the future if the need & opportunity arise.) Rationals are :

    • The '+' can't be parsed by search engines.
    • The '3' is a subject of strong opinions. I don't have one, so i want to stay away of it if possible.
    • 'super' convey well enough the 'feature creep' orientation of this fork vs other slic3r branches.
    • I choose slic3r++ to follow slic3rPE, now that it's PrusaSlicer and as i'm a fork of it, i follow the change.

  • As there are a rename, your profile directory has changed its name: to transfert your custom settings, you can export the bundle and re-import them, or just copy the content of your slic3r++ directory into SuperSlicer (it's in c:/user/myusername/appdata/roaming in windows)

  • Calibrations: Now you have a menu entry that let you ask for generated parts to help you calibrate your printer and settings. It's a feature that will evolve on the long run, so every advice is welcome.
    filament_flow

    • Bed level calibration: help you to have a perfect first layer! (NSFW)
    • Filament flow calibration: the definitive flow calibration, that let you be sure that your extruder will exerts the right pressure at the right time.
    • Filament temperature calibration: generate custom-sized & labelled heat tower test, made from the model of gaaZolee.
    • Bridge flow calibration: helps you to set the bridge flow setting to have the best bridges possible.
    • Top layer calibration (over-bridge flow calibration) to let you try to have the nicest top surface possible.

  • Extra wipe option (for external perimeters), that may help to reduce the seam

  • Small screen may be a bit better supported, with extra thin labels where needed.

  • #206 reverse direction on overhang overhaul:

    • now has a dedicated setting & a threshold (how steep the overhang is)
    • when reverse_direction trigger on the external loop, it also trigger for all other loops on this side (so, no more U-turn)
    • do not depends on extra_perimeter anymore
    • now extra_perimeters split into extra_perimeters (the old useless one) and extra_perimeters_overhangs

  • extra lift on first layer, for those who have a very very bad plate, or screw head that pop off of it.

  • first steps to allow a milling post-process if you have a tool-changer printer.

  • external perimeter overlap (experimental, not tested yet)

  • updates on voron profiles: now use the start_macro, so if you used 'my' custom start procedure, you should move it to your own klipper macro before updating!

  • add sorting setting for complete_objects

  • various gui improvements (fields sizes complete objects pop-up now a warning text)

bugfixes

  • #232 Do not auto-generate G-code when using Klipper
  • #247 fix because a polygon can disappear if grown.
  • fix bug when unticking "complete objects"
  • #250 allow klipper to do firmware retraction.
  • #252 some "complete objects" problems, wip but now the check should be perfect.
  • #256, the first layer speed is not overridden by the automatic one.
  • #260: now, it's not mandatory to have M20X gcode in the output gcode, you can activate or deactivate those (before, it was Marlin only).
  • #260: better text & layout for filament cooling, removal of the "activate-auto cooling" as it does nothing.

bugfixes in the 2.2.51.1

  • #265 crash when adding extruder
  • #263 temp calibration problem when using a not-0.4 nozzle

** bugfixes in the 2.2.51.2

  • #269 fix to makes it recognize slic3r++ config from gcode
  • #266 use boost to trim the line, safer. Thanks to @pix for the fix
  • typos, thanks to neophrema, thierryzoller and paulhew69
  • #272 better calibration placement with skirt/brim
  • #276 fix klipper dual extruder problem
  • Calibration: now doesn't change the "last directory used" anymore
  • Fix bug where perimeters could be printed after infill because they wanted to start with a thin wall.

known issues

  • afterburner profile are all with 250*250 bed, you have to edit this or use the mobius one and reduce the retraction.

Downloads in the "assets" section below

There may be an appimage for linux, if all goes well
A bug-fixes only (most of them, and win-only for now) has been posted in the previous release post. It's the stable release (2.2.50.1).

Assets 11
Loading