Remembering Sanjay Edition

If someone wonders why this title: https://e3d-online.com/blogs/news/sanjaymortimer
Most of my nozzle comes from E3D. He was such an inspirational man, and so enthusiastic in his videos.

The PrusaSlicer 2.4 may go out of beta in a not-distant future. The next version may well be the 2.4.58.
This 2.3.57 branch will continue to get fixes in the coming months. It's now the "long term support" one.

changes

• macos-arm build, thanks to @claytono. Tell me if it doesn't works.
  • to allow it to run : xattr -cr /Applications/SuperSlicer.app
• Dense infill: fix the full fill density bug & rework detection settings:
  • AutoNotFull: now print the dense infill only if the area to cover doesn't fill the sparse area.
  • AutoOrEnlarged: now print the auto dense infill, unless the area to cover is wider than (nozzle diameter*2/infill ratio) and the enlarged version is smaller than the auto
  • New: AutoOrDisable: now print the auto dense infill, unless the area to cover is wider than (nozzle diameter*2/infill ratio) or the area to cover fill the sparse area.
• Bridge improvements:
  • Don't connect if too far away. Prevent printing a bridge over another one, following the perimeter.
  • Better connection direction, as both are now tested.
  • Fix some other rectilinear issues, crash, bugs #1889
  • Bridge detector now compute much quicker than in the previous version.
  • Fix wrong bridge offset (can lead to no bridge or some missing)
• Fix too detailed gapfill
  • Add resolution_internal to control it (and gyroid)
  • Disallow gapfill lines to be split in the middle when printed (now start at an end and not in the middle)

fixes

• Fix brim-raft bug. The behaviour isn't correct yet, but at least it's now useable. #1927
• Fix 'small perimeter' speed change #1948
• Fix missing lift/retraction #1967
• fix missing prusa sla #1963
• fix disjointed fill surface #2038
• Gapfill "star" should be less frequent
• Fix: allow extra wipe for 1-perimeter configs #2029
• Fix some cases where "no perimeter on bridge" won't activate #1917
• Avoid unneeded unretract followed by a retract in mid-air for sparse wipe tower. #1467
• Plater auto-center now ignore unprintable objects #2008
• Fix seam object for multiple instances with different rotations #2015
• infill_first also modifiable if sparse infill #1971
• Fix "grey" machine limits field for export. #1960
• Fix Calibration hyperlinks: open the os browser #2005
• Fix 'Internal error: ConfigBase::get_abs_value()' (bad initialization of the wizard) #1938
  *Mmulti-line for milling custom gcode fields #2027
• Don't consider ' ' or '\n' for custom toolchange gcode detection #1368
• Don't allow 0-speed retraction #2033
• Update/fix "sliced info" to have the info per extruder & color
• Fix enforce_full_fill_volume for smooth pattern, when it splits from the half-offset.
• Tooltip, typos, ... #1981
• Fr localization update #2004 #1840

note: I haven't tested the linux & macos build.
You can have daily builds in the action menu of github.
You can support me with the "sponsor" button