init

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

SwiftKick.PSCalc/SwiftKick.PSCalc.sln

@@ -0,0 +1,25 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio 15
+VisualStudioVersion = 15.0.28010.2003
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "SwiftKick.PSCalc", "SwiftKick.PSCalc\SwiftKick.PSCalc.csproj", "{E45C4BFC-03E4-45E6-B578-328BF7D73E04}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{E45C4BFC-03E4-45E6-B578-328BF7D73E04}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{E45C4BFC-03E4-45E6-B578-328BF7D73E04}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{E45C4BFC-03E4-45E6-B578-328BF7D73E04}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{E45C4BFC-03E4-45E6-B578-328BF7D73E04}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {923F75D8-ECE8-4B84-ABF9-0FDEAACE1DE7}
+	EndGlobalSection
+EndGlobal

SwiftKick.PSCalc/SwiftKick.PSCalc/AddNumberCmdlet.cs

@@ -0,0 +1,26 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Management.Automation;
+using System.Text;
+using System.Threading.Tasks;
+
+namespace SwiftKick.PSCalc
+{
+    [Cmdlet("Add", "Number")]
+    [OutputType(typeof(Answer))]
+    public class AddNumberCmdlet : Cmdlet
+    {
+        [Parameter]
+        public int A { get; set; }
+
+        [Parameter]
+        public int B { get; set; }
+
+        protected override void ProcessRecord()
+        {
+            var result = new Answer { Result = A + B };
+            WriteObject(result);
+        }
+    }
+}

SwiftKick.PSCalc/SwiftKick.PSCalc/Answer.cs

@@ -0,0 +1,7 @@
+namespace SwiftKick.PSCalc
+{
+    public class Answer
+    {
+        public int Result { get; set; }
+    }
+}

SwiftKick.PSCalc/SwiftKick.PSCalc/Properties/AssemblyInfo.cs

@@ -0,0 +1,36 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("SwiftKick.PSCalc")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("SwiftKick.PSCalc")]
+[assembly: AssemblyCopyright("Copyright ©  2018")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components.  If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("e45c4bfc-03e4-45e6-b578-328bf7d73e04")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]

SwiftKick.PSCalc/SwiftKick.PSCalc/SubtractNumberCmdlet.cs

@@ -0,0 +1,21 @@
+using System.Management.Automation;
+
+namespace SwiftKick.PSCalc
+{
+    [Cmdlet("Subtract", "Number")]
+    [OutputType(typeof(Answer))]
+    public class SubtractNumberCmdlet : Cmdlet
+    {
+        [Parameter]
+        public int A { get; set; }
+
+        [Parameter]
+        public int B { get; set; }
+
+        protected override void ProcessRecord()
+        {
+            var result = new Answer {Result = A - B};
+            WriteObject(result);
+        }
+    }
+}

SwiftKick.PSCalc/SwiftKick.PSCalc/SwiftKick.PSCalc.csproj

@@ -0,0 +1,56 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{E45C4BFC-03E4-45E6-B578-328BF7D73E04}</ProjectGuid>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>SwiftKick.PSCalc</RootNamespace>
+    <AssemblyName>SwiftKick.PSCalc</AssemblyName>
+    <TargetFrameworkVersion>v4.6.1</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <Deterministic>true</Deterministic>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL">
+      <HintPath>..\packages\Microsoft.PowerShell.5.ReferenceAssemblies.1.1.0\lib\net4\System.Management.Automation.dll</HintPath>
+    </Reference>
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Net.Http" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="AddNumberCmdlet.cs" />
+    <Compile Include="Answer.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+    <Compile Include="SubtractNumberCmdlet.cs" />
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="packages.config" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+</Project>

SwiftKick.PSCalc/SwiftKick.PSCalc/packages.config

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="utf-8"?>
+<packages>
+  <package id="Microsoft.PowerShell.5.ReferenceAssemblies" version="1.1.0" targetFramework="net461" />
+</packages>