TDM Edge Energy Consumption Report

The TDM Edge Energy Consumption Report is an application specifically designed for the TDM Edge Gateway devices paired with the EmonTx energy monitors. The application, running in the background, periodically

• collects the pulse measurements from the InfluxDB database to compute the consumption of electric energy;
• sends the data to a TDM web server, which produces a PDF report about the user consumptions and sends it to the user email address.

Configurations

Settings are retrieved from both configuration file and command line. Values are applied in the following order, the last overwriting the previous:

1. configuration file section GENERAL for the common options (logging, InfluxDB parameters, ...);
2. configuration file section Energy_Consumption_Report for both common and specific options;
3. command line options.

Configuration file

logging_level : threshold level for log messages (default: 20)

influxdb_host : hostname or address of the influx database (default: influxdb)

influxdb_port : port of the influx database (default: 8086)

gps_location : GPS coordinates of the sensor expressed as latitude and longitude (default: 0.0,0.0)

measurement_ts : name of the InfluxDB measurement storing the EmonTx pulses time series

email_address : email address where to receive the report prepared by the web service

web_server_url : URL of the web service from which to request the energy consumption report

sqlite_db : name of the SQLite database to store the report requests

sqlite_db_table : name of the SQLite table to store the report requests

reporting_interval : frequency, in seconds, between consecutive report requests

Options accepted in GENERAL section

• logging_level
• influxdb_host
• influxdb_port
• gps_location

In the following example of configuration file, the logging_level setting is overwritten to 20 only for the Energy_Consumption_Report application, while other applications use 10 as specified in the GENERAL section:

[GENERAL]
influxdb_host = influxdb
influxdb_port = 8086
gps_location = 0.0,0.0
logging_level = 10

[Energy_Consumption_Report]
measurement_ts = emontx3
email_address = [email protected]
web_server_url = https://tdm-or5.jicsardegna.it/get_report
sqlite_db = reporting.db
sqlite_db_table = report_requests
reporting_interval = 86400

Command line

-h, --help : show this help message and exit

-c FILE, --config-file FILE : specify the config file

-l LOGGING_LEVEL, --logging-level LOGGING_LEVEL : threshold level for log messages (default: 20)

--influxdb-host INFLUXDB_HOST : hostname or address of the influx database (default: influxdb)

--influxdb-port INFLUXDB_PORT : port of the influx database (default: 8086)

--gps-location GPS_LOCATION : GPS coordinates of the sensor expressed as latitude and longitude (default: 0.0,0.0)

--measurement-ts MEASUREMENT_TS : name of the time series containing the pulse measurements (default: emontx3)

--email-address EMAIL_ADDRESS : email address where to receive the report prepared by the web service (default: None)

--web-server-url WEB_SERVER_URL : URL of the web service from which to request the energy consumption report (default: https://tdm-or5.jicsardegna.it/get_report)

--sqlite-db SQLITE_DB : name of the SQLite database to store the report requests (default: reporting.db)

--sqlite-db-table SQLITE_DB_TABLE : name of the SQLite table to store the report requests (default: report_requests)

--reporting-interval REPORTING_INTERVAL : frequency, in seconds, between consecutive report requests (default: 86400)