This project was bootstrapped with Create React App.
Below you will find some information on how to perform common tasks.
You can find the most recent version of this guide here.
- Updating to New Releases
- Sending Feedback
- Folder Structure
- Available Scripts
- Supported Browsers
- Supported Language Features
- Syntax Highlighting in the Editor
- Displaying Lint Output in the Editor
- Debugging in the Editor
- Formatting Code Automatically
- Changing the Page
<title> - Installing a Dependency
- Importing a Component
- Code Splitting
- Adding a Stylesheet
- Adding a CSS Modules Stylesheet
- Adding a Sass Stylesheet
- Post-Processing CSS
- Adding Images, Fonts, and Files
- Adding SVGs
- Using the
publicFolder - Using Global Variables
- Adding Bootstrap
- Adding Flow
- Adding Relay
- Adding a Router
- Adding Custom Environment Variables
- Can I Use Decorators?
- Fetching Data with AJAX Requests
- Integrating with an API Backend
- Proxying API Requests in Development
- Using HTTPS in Development
- Generating Dynamic
<meta>Tags on the Server - Pre-Rendering into Static HTML Files
- Injecting Data from the Server into the Page
- Running Tests
- Debugging Tests
- Developing Components in Isolation
- Publishing Components to npm
- Making a Progressive Web App
- Analyzing the Bundle Size
- Deployment
- Advanced Configuration
- Troubleshooting
- Alternatives to Ejecting
- Something Missing?
Create React App is divided into two packages:
create-react-appis a global command-line utility that you use to create new projects.react-scriptsis a development dependency in the generated projects (including this one).
You almost never need to update create-react-app itself: it delegates all the setup to react-scripts.
When you run create-react-app, it always creates the project with the latest version of react-scripts so you’ll get all the new features and improvements in newly created apps automatically.
To update an existing project to a new version of react-scripts, open the changelog, find the version you’re currently on (check package.json in this folder if you’re not sure), and apply the migration instructions for the newer versions.
In most cases bumping the react-scripts version in package.json and running npm install (or yarn install) in this folder should be enough, but it’s good to consult the changelog for potential breaking changes.
We commit to keeping the breaking changes minimal so you can upgrade react-scripts painlessly.
We are always open to your feedback.
After creation, your project should look like this:
my-app/
README.md
node_modules/
package.json
public/
index.html
favicon.ico
src/
App.css
App.js
App.test.js
index.css
index.js
logo.svg
For the project to build, these files must exist with exact filenames:
public/index.htmlis the page template;src/index.jsis the JavaScript entry point.
You can delete or rename the other files.
You may create subdirectories inside src. For faster rebuilds, only files inside src are processed by Webpack.
You need to put any JS and CSS files inside src, otherwise Webpack won’t see them.
Only files inside public can be used from public/index.html.
Read instructions below for using assets from JavaScript and HTML.
You can, however, create more top-level directories.
They will not be included in the production build so you can use them for things like documentation.
In the project directory, you can run:
Runs the app in the development mode.
Open http://localhost:3000 to view it in the browser.
The page will reload if you make edits.
You will also see any lint errors in the console.
Launches the test runner in the interactive watch mode.
See the section about running tests for more information.
Builds the app for production to the build folder.
It correctly bundles React in production mode and optimizes the build for the best performance.
The build is minified and the filenames include the hashes.
Your app is ready to be deployed!
See the section about deployment for more information.
Note: this is a one-way operation. Once you eject, you can’t go back!
If you aren’t satisfied with the build tool and configuration choices, you can eject at any time. This command will remove the single build dependency from your project.
Instead, it will copy all the configuration files and the transitive dependencies (Webpack, Babel, ESLint, etc) right into your project so you have full control over them. All of the commands except eject will still work, but they will point to the copied scripts so you can tweak them. At this point you’re on your own.
You don’t have to ever use eject. The curated feature set is suitable for small and middle deployments, and you shouldn’t feel obligated to use this feature. However we understand that this tool wouldn’t be useful if you couldn’t customize it when you are ready for it.
By default, the generated project supports all modern browsers.
Support for Internet Explorer 9, 10, and 11 requires polyfills.
This project supports a superset of the latest JavaScript standard.
In addition to ES6 syntax features, it also supports:
- Exponentiation Operator (ES2016).
- Async/await (ES2017).
- Object Rest/Spread Properties (ES2018).
- Dynamic import() (stage 3 proposal)
- Class Fields and Static Properties (part of stage 3 proposal).
- JSX and Flow syntax.
Learn more about different proposal stages.
While we recommend using experimental proposals with some caution, Facebook heavily uses these features in the product code, so we intend to provide codemods if any of these proposals change in the future.
Note that this project includes no polyfills by default.
If you use any other ES6+ features that need runtime support (such as Array.from() or Symbol), make sure you are including the appropriate polyfills manually, or that the browsers you are targeting already support them.
To configure the syntax highlighting in your favorite text editor, head to the relevant Babel documentation page and follow the instructions. Some of the most popular editors are covered.
Note: this feature is available with
[email protected]and higher.
It also only works with npm 3 or higher.
Some editors, including Sublime Text, Atom, and Visual Studio Code, provide plugins for ESLint.
They are not required for linting. You should see the linter output right in your terminal as well as the browser console. However, if you prefer the lint results to appear right in your editor, there are some extra steps you can do.
You would need to install an ESLint plugin for your editor first. Then, add a file called .eslintrc to the project root:
{
"extends": "react-app"
}Now your editor should report the linting warnings.
Note that even if you edit your .eslintrc file further, these changes will only affect the editor integration. They won’t affect the terminal and in-browser lint output. This is because Create React App intentionally provides a minimal set of rules that find common mistakes.
If you want to enforce a coding style for your project, consider using Prettier instead of ESLint style rules.
This feature is currently only supported by Visual Studio Code and WebStorm.
Visual Studio Code and WebStorm support debugging out of the box with Create React App. This enables you as a developer to write and debug your React code without leaving the editor, and most importantly it enables you to have a continuous development workflow, where context switching is minimal, as you don’t have to switch between tools.
You would need to have the latest version of VS Code and VS Code Chrome Debugger Extension installed.
Then add the block below to your launch.json file and put it inside the .vscode folder in your app’s root directory.
{
"version": "0.2.0",
"configurations": [
{
"name": "Chrome",
"type": "chrome",
"request": "launch",
"url": "http://localhost:3000",
"webRoot": "${workspaceRoot}/src",
"sourceMapPathOverrides": {
"webpack:///src/*": "${webRoot}/*"
}
}
]
}Note: the URL may be different if you've made adjustments via the HOST or PORT environment variables.
Start your app by running npm start, and start debugging in VS Code by pressing F5 or by clicking the green debug icon. You can now write code, set breakpoints, make changes to the code, and debug your newly modified code—all from your editor.
Having problems with VS Code Debugging? Please see their troubleshooting guide.
You would need to have WebStorm and JetBrains IDE Support Chrome extension installed.
In the WebStorm menu Run select Edit Configurations.... Then click + and select JavaScript Debug. Paste http://localhost:3000 into the URL field and save the configuration.
Note: the URL may be different if you've made adjustments via the HOST or PORT environment variables.
Start your app by running npm start, then press ^D on macOS or F9 on Windows and Linux or click the green debug icon to start debugging in WebStorm.
The same way you can debug your application in IntelliJ IDEA Ultimate, PhpStorm, PyCharm Pro, and RubyMine.
Prettier is an opinionated code formatter with support for JavaScript, CSS and JSON. With Prettier you can format the code you write automatically to ensure a code style within your project. See the Prettier's GitHub page for more information, and look at this page to see it in action.
To format our code whenever we make a commit in git, we need to install the following dependencies:
npm install --save husky lint-staged prettierAlternatively you may use yarn:
yarn add husky lint-staged prettierhuskymakes it easy to use githooks as if they are npm scripts.lint-stagedallows us to run scripts on staged files in git. See this blog post about lint-staged to learn more about it.prettieris the JavaScript formatter we will run before commits.
Now we can make sure every file is formatted correctly by adding a few lines to the package.json in the project root.
Add the following field to the package.json section:
+ "husky": {
+ "hooks": {
+ "pre-commit": "lint-staged"
+ }
+ }Next we add a 'lint-staged' field to the package.json, for example:
"dependencies": {
// ...
},
+ "lint-staged": {
+ "src/**/*.{js,jsx,json,css}": [
+ "prettier --single-quote --write",
+ "git add"
+ ]
+ },
"scripts": {Now, whenever you make a commit, Prettier will format the changed files automatically. You can also run ./node_modules/.bin/prettier --single-quote --write "src/**/*.{js,jsx}" to format your entire project for the first time.
Next you might want to integrate Prettier in your favorite editor. Read the section on Editor Integration on the Prettier GitHub page.
You can find the source HTML file in the public folder of the generated project. You may edit the <title> tag in it to change the title from “React App” to anything else.
Note that normally you wouldn’t edit files in the public folder very often. For example, adding a stylesheet is done without touching the HTML.
If you need to dynamically update the page title based on the content, you can use the browser document.title API. For more complex scenarios when you want to change the title from React components, you can use React Helmet, a third party library.
If you use a custom server for your app in production and want to modify the title before it gets sent to the browser, you can follow advice in this section. Alternatively, you can pre-build each page as a static HTML file which then loads the JavaScript bundle, which is covered here.
The generated project includes React and ReactDOM as dependencies. It also includes a set of scripts used by Create React App as a development dependency. You may install other dependencies (for example, React Router) with npm:
npm install --save react-router-domAlternatively you may use yarn:
yarn add react-router-domThis works for any library, not just react-router-dom.
This project setup supports ES6 modules thanks to Webpack.
While you can still use require() and module.exports, we encourage you to use import and export instead.
For example:
import React, { Component } from 'react';
class Button extends Component {
render() {
// ...
}
}
export default Button; // Don’t forget to use export default!import React, { Component } from 'react';
import Button from './Button'; // Import a component from another file
class DangerButton extends Component {
render() {
return <Button color="red" />;
}
}
export default DangerButton;Be aware of the difference between default and named exports. It is a common source of mistakes.
We suggest that you stick to using default imports and exports when a module only exports a single thing (for example, a component). That’s what you get when you use export default Button and import Button from './Button'.
Named exports are useful for utility modules that export several functions. A module may have at most one default export and as many named exports as you like.
Learn more about ES6 modules:
Instead of downloading the entire app before users can use it, code splitting allows you to split your code into small chunks which you can then load on demand.
This project setup supports code splitting via dynamic import(). Its proposal is in stage 3. The import() function-like form takes the module name as an argument and returns a Promise which always resolves to the namespace object of the module.
Here is an example:
const moduleA = 'Hello';
export { moduleA };import React, { Component } from 'react';
class App extends Component {
handleClick = () => {
import('./moduleA')
.then(({ moduleA }) => {
// Use moduleA
})
.catch(err => {
// Handle failure
});
};
render() {
return (
<div>
<button onClick={this.handleClick}>Load</button>
</div>
);
}
}
export default App;This will make moduleA.js and all its unique dependencies as a separate chunk that only loads after the user clicks the 'Load' button.
You can also use it with async / await syntax if you prefer it.
If you are using React Router check out this tutorial on how to use code splitting with it. You can find the companion GitHub repository here.
Also check out the Code Splitting section in React documentation.
This project setup uses Webpack for handling all assets. Webpack offers a custom way of “extending” the concept of import beyond JavaScript. To express that a JavaScript file depends on a CSS file, you need to import the CSS from the JavaScript file:
.Button {
padding: 20px;
}import React, { Component } from 'react';
import './Button.css'; // Tell Webpack that Button.js uses these styles
class Button extends Component {
render() {
// You can use them as regular CSS styles
return <div className="Button" />;
}
}This is not required for React but many people find this feature convenient. You can read about the benefits of this approach here. However you should be aware that this makes your code less portable to other build tools and environments than Webpack.
In development, expressing dependencies this way allows your styles to be reloaded on the fly as you edit them. In production, all CSS files will be concatenated into a single minified .css file in the build output.
If you are concerned about using Webpack-specific semantics, you can put all your CSS right into src/index.css. It would still be imported from src/index.js, but you could always remove that import if you later migrate to a different build tool.
Note: this feature is available with
[email protected]and higher.
This project supports CSS Modules alongside regular stylesheets using the [name].module.css file naming convention. CSS Modules allows the scoping of CSS by automatically creating a unique classname of the format [filename]\_[classname]\_\_[hash].
Tip: Should you want to preprocess a stylesheet with Sass then make sure to follow the installation instructions and then change the stylesheet file extension as follows:
[name].module.scssor[name].module.sass.
CSS Modules let you use the same CSS class name in different files without worrying about naming clashes. Learn more about CSS Modules here.
.error {
background-color: red;
}.error {
color: red;
}import React, { Component } from 'react';
import styles from './Button.module.css'; // Import css modules stylesheet as styles
import './another-stylesheet.css'; // Import regular stylesheet
class Button extends Component {
render() {
// reference as a js object
return <button className={styles.error}>Error Button</button>;
}
}No clashes from other .error class names
<!-- This button has red background but not red text -->
<button class="Button_error_ax7yz"></div>This is an optional feature. Regular <link> stylesheets and CSS files are fully supported. CSS Modules are turned on for files ending with the .module.css extension.
Note: this feature is available with
[email protected]and higher.
Generally, we recommend that you don’t reuse the same CSS classes across different components. For example, instead of using a .Button CSS class in <AcceptButton> and <RejectButton> components, we recommend creating a <Button> component with its own .Button styles, that both <AcceptButton> and <RejectButton> can render (but not inherit).
Following this rule often makes CSS preprocessors less useful, as features like mixins and nesting are replaced by component composition. You can, however, integrate a CSS preprocessor if you find it valuable.
To use Sass, first install node-sass:
$ npm install node-sass --save
$ # or
$ yarn add node-sassNow you can rename src/App.css to src/App.scss and update src/App.js to import src/App.scss.
This file and any other file will be automatically compiled if imported with the extension .scss or .sass.
To share variables between Sass files, you can use Sass imports. For example, src/App.scss and other component style files could include @import "./shared.scss"; with variable definitions.
This will allow you to do imports like
@import 'styles/_colors.scss'; // assuming a styles directory under src/
@import '~nprogress/nprogress'; // importing a css file from the nprogress node moduleTip: You can opt into using this feature with CSS modules too!
Note: You must prefix imports from
node_moduleswith~as displayed above.
This project setup minifies your CSS and adds vendor prefixes to it automatically through Autoprefixer so you don’t need to worry about it.
Support for new CSS features like the all property, break properties, custom properties, and media query ranges are automatically polyfilled to add support for older browsers.
You can customize your target support browsers by adjusting the browserslist key in package.json accoring to the Browserslist specification.
For example, this:
.App {
display: flex;
flex-direction: row;
align-items: center;
}becomes this:
.App {
display: -webkit-box;
display: -ms-flexbox;
display: flex;
-webkit-box-orient: horizontal;
-webkit-box-direction: normal;
-ms-flex-direction: row;
flex-direction: row;
-webkit-box-align: center;
-ms-flex-align: center;
align-items: center;
}If you need to disable autoprefixing for some reason, follow this section.
CSS Grid Layout prefixing is disabled by default, but it will not strip manual prefixing.
If you'd like to opt-in to CSS Grid prefixing, first familiarize yourself about its limitations.
To enable CSS Grid prefixing, add /* autoprefixer grid: on */ to the top of your CSS file.
With Webpack, using static assets like images and fonts works similarly to CSS.
You can import a file right in a JavaScript module. This tells Webpack to include that file in the bundle. Unlike CSS imports, importing a file gives you a string value. This value is the final path you can reference in your code, e.g. as the src attribute of an image or the href of a link to a PDF.
To reduce the number of requests to the server, importing images that are less than 10,000 bytes returns a data URI instead of a path. This applies to the following file extensions: bmp, gif, jpg, jpeg, and png. SVG files are excluded due to #1153.
Here is an example:
import React from 'react';
import logo from './logo.png'; // Tell Webpack this JS file uses this image
console.log(logo); // /logo.84287d09.png
function Header() {
// Import result is the URL of your image
return <img src={logo} alt="Logo" />;
}
export default Header;This ensures that when the project is built, Webpack will correctly move the images into the build folder, and provide us with correct paths.
This works in CSS too:
.Logo {
background-image: url(./logo.png);
}Webpack finds all relative module references in CSS (they start with ./) and replaces them with the final paths from the compiled bundle. If you make a typo or accidentally delete an important file, you will see a compilation error, just like when you import a non-existent JavaScript module. The final filenames in the compiled bundle are generated by Webpack from content hashes. If the file content changes in the future, Webpack will give it a different name in production so you don’t need to worry about long-term caching of assets.
Please be advised that this is also a custom feature of Webpack.
It is not required for React but many people enjoy it (and React Native uses a similar mechanism for images).
An alternative way of handling static assets is described in the next section.
Note: this feature is available with
[email protected]and higher.
One way to add SVG files was described in the section above. You can also import SVGs directly as React components. You can use either of the two approaches. In your code it would look like this:
import { ReactComponent as Logo } from './logo.svg';
const App = () => (
<div>
{/* Logo is an actual React component */}
<Logo />
</div>
);This is handy if you don't want to load SVG as a separate file. Don't forget the curly braces in the import! The ReactComponent import name is special and tells Create React App that you want a React component that renders an SVG, rather than its filename.
Note: this feature is available with
[email protected]and higher.
The public folder contains the HTML file so you can tweak it, for example, to set the page title.
The <script> tag with the compiled code will be added to it automatically during the build process.
You can also add other assets to the public folder.
Note that we normally encourage you to import assets in JavaScript files instead.
For example, see the sections on adding a stylesheet and adding images and fonts.
This mechanism provides a number of benefits:
- Scripts and stylesheets get minified and bundled together to avoid extra network requests.
- Missing files cause compilation errors instead of 404 errors for your users.
- Result filenames include content hashes so you don’t need to worry about browsers caching their old versions.
However there is an escape hatch that you can use to add an asset outside of the module system.
If you put a file into the public folder, it will not be processed by Webpack. Instead it will be copied into the build folder untouched. To reference assets in the public folder, you need to use a special variable called PUBLIC_URL.
Inside index.html, you can use it like this:
<link rel="shortcut icon" href="%PUBLIC_URL%/favicon.ico">Only files inside the public folder will be accessible by %PUBLIC_URL% prefix. If you need to use a file from src or node_modules, you’ll have to copy it there to explicitly specify your intention to make this file a part of the build.
When you run npm run build, Create React App will substitute %PUBLIC_URL% with a correct absolute path so your project works even if you use client-side routing or host it at a non-root URL.
In JavaScript code, you can use process.env.PUBLIC_URL for similar purposes:
render() {
// Note: this is an escape hatch and should be used sparingly!
// Normally we recommend using `import` for getting asset URLs
// as described in “Adding Images and Fonts” above this section.
return <img src={process.env.PUBLIC_URL + '/img/logo.png'} />;
}Keep in mind the downsides of this approach:
- None of the files in
publicfolder get post-processed or minified. - Missing files will not be called at compilation time, and will cause 404 errors for your users.
- Result filenames won’t include content hashes so you’ll need to add query arguments or rename them every time they change.
Normally we recommend importing stylesheets, images, and fonts from JavaScript.
The public folder is useful as a workaround for a number of less common cases:
- You need a file with a specific name in the build output, such as
manifest.webmanifest. - You have thousands of images and need to dynamically reference their paths.
- You want to include a small script like
pace.jsoutside of the bundled code. - Some library may be incompatible with Webpack and you have no other option but to include it as a
<script>tag.
Note that if you add a <script> that declares global variables, you also need to read the next section on using them.
When you include a script in the HTML file that defines global variables and try to use one of these variables in the code, the linter will complain because it cannot see the definition of the variable.
You can avoid this by reading the global variable explicitly from the window object, for example:
const $ = window.$;This makes it obvious you are using a global variable intentionally rather than because of a typo.
Alternatively, you can force the linter to ignore any line by adding // eslint-disable-line after it.
You don’t have to use reactstrap together with React but it is a popular library for integrating Bootstrap with React apps. If you need it, you can integrate it with Create React App by following these steps:
Install reactstrap and Bootstrap from npm. reactstrap does not include Bootstrap CSS so this needs to be installed as well:
npm install --save reactstrap bootstrap@4Alternatively you may use yarn:
yarn add bootstrap@4 reactstrapImport Bootstrap CSS and optionally Bootstrap theme CSS in the beginning of your src/index.js file:
import 'bootstrap/dist/css/bootstrap.css';
// Put any other imports below so that CSS from your
// components takes precedence over default styles.Import required reactstrap components within src/App.js file or your custom component files:
import { Button } from 'reactstrap';Now you are ready to use the imported reactstrap components within your component hierarchy defined in the render method. Here is an example App.js redone using reactstrap.
Note: this feature is available with
[email protected]and higher.
Sometimes you might need to tweak the visual styles of Bootstrap (or equivalent package).
As of [email protected] you can import .scss files. This makes it possible to use a package's built-in Sass variables for global style preferences.
To customize Bootstrap, create a file called src/custom.scss (or similar) and import the Bootstrap source stylesheet. Add any overrides before the imported file(s). You can reference Bootstrap's documentation for the names of the available variables.
// Override default variables before the import
$body-bg: #000;
// Import Bootstrap and its default variables
@import '~bootstrap/scss/bootstrap.scss';Note: You must prefix imports from
node_moduleswith~as displayed above.
Finally, import the newly created .scss file instead of the default Bootstrap .css in the beginning of your src/index.js file, for example:
import './custom.scss';Flow is a static type checker that helps you write code with fewer bugs. Check out this introduction to using static types in JavaScript if you are new to this concept.
Recent versions of Flow work with Create React App projects out of the box.
To add Flow to a Create React App project, follow these steps:
- Run
npm install --save flow-bin(oryarn add flow-bin). - Add
"flow": "flow"to thescriptssection of yourpackage.json. - Run
npm run flow init(oryarn flow init) to create a.flowconfigfile in the root directory. - Add
// @flowto any files you want to type check (for example, tosrc/App.js).
Now you can run npm run flow (or yarn flow) to check the files for type errors.
You can optionally use an IDE like Nuclide for a better integrated experience.
In the future we plan to integrate it into Create React App even more closely.
To learn more about Flow, check out its documentation.
Relay is a framework for building data-driven React applications powered by GraphQL. The current release candidate of Relay works with Create React App projects out of the box using Babel Macros. Simply set up your project as laid out in the Relay documentation, then make sure you have a version of the babel plugin providing the macro.
To add it, run:
npm install --save --dev babel-plugin-relay@devAlternatively you may use yarn:
yarn upgrade babel-plugin-relay@devThen, wherever you use the graphql template tag, import the macro:
import graphql from 'babel-plugin-relay/macro';
// instead of:
// import { graphql } from "babel-plugin-relay"
graphql`
query UserQuery {
viewer {
id
}
}
`;To learn more about Relay, check out its documentation.
Create React App doesn't prescribe a specific routing solution, but React Router is the most popular one.
To add it, run:
npm install --save react-router-domAlternatively you may use yarn:
yarn add react-router-domTo try it, delete all the code in src/App.js and replace it with any of the examples on its website. The Basic Example is a good place to get started.
Note that you may need to configure your production server to support client-side routing before deploying your app.
Note: this feature is available with
[email protected]and higher.
Your project can consume variables declared in your environment as if they were declared locally in your JS files. By
default you will have NODE_ENV defined for you, and any other environment variables starting with
REACT_APP_.
The environment variables are embedded during the build time. Since Create React App produces a static HTML/CSS/JS bundle, it can’t possibly read them at runtime. To read them at runtime, you would need to load HTML into memory on the server and replace placeholders in runtime, just like described here. Alternatively you can rebuild the app on the server anytime you change them.
Note: You must create custom environment variables beginning with
REACT_APP_. Any other variables exceptNODE_ENVwill be ignored to avoid accidentally exposing a private key on the machine that could have the same name. Changing any environment variables will require you to restart the development server if it is running.
These environment variables will be defined for you on process.env. For example, having an environment
variable named REACT_APP_SECRET_CODE will be exposed in your JS as process.env.REACT_APP_SECRET_CODE.
There is also a special built-in environment variable called NODE_ENV. You can read it from process.env.NODE_ENV. When you run npm start, it is always equal to 'development', when you run npm test it is always equal to 'test', and when you run npm run build to make a production bundle, it is always equal to 'production'. You cannot override NODE_ENV manually. This prevents developers from accidentally deploying a slow development build to production.
These environment variables can be useful for displaying information conditionally based on where the project is deployed or consuming sensitive data that lives outside of version control.
First, you need to have environment variables defined. For example, let’s say you wanted to consume a secret defined
in the environment inside a <form>:
render() {
return (
<div>
<small>You are running this application in <b>{process.env.NODE_ENV}</b> mode.</small>
<form>
<input type="hidden" defaultValue={process.env.REACT_APP_SECRET_CODE} />
</form>
</div>
);
}During the build, process.env.REACT_APP_SECRET_CODE will be replaced with the current value of the REACT_APP_SECRET_CODE environment variable. Remember that the NODE_ENV variable will be set for you automatically.
When you load the app in the browser and inspect the <input>, you will see its value set to abcdef, and the bold text will show the environment provided when using npm start:
<div>
<small>You are running this application in <b>development</b> mode.</small>
<form>
<input type="hidden" value="abcdef" />
</form>
</div>The above form is looking for a variable called REACT_APP_SECRET_CODE from the environment. In order to consume this
value, we need to have it defined in the environment. This can be done using two ways: either in your shell or in
a .env file. Both of these ways are described in the next few sections.
Having access to the NODE_ENV is also useful for performing actions conditionally:
if (process.env.NODE_ENV !== 'production') {
analytics.disable();
}When you compile the app with npm run build, the minification step will strip out this condition, and the resulting bundle will be smaller.
Note: this feature is available with
[email protected]and higher.
You can also access the environment variables starting with REACT_APP_ in the public/index.html. For example:
<title>%REACT_APP_WEBSITE_NAME%</title>Note that the caveats from the above section apply:
- Apart from a few built-in variables (
NODE_ENVandPUBLIC_URL), variable names must start withREACT_APP_to work. - The environment variables are injected at build time. If you need to inject them at runtime, follow this approach instead.
Defining environment variables can vary between OSes. It’s also important to know that this manner is temporary for the life of the shell session.
set "REACT_APP_SECRET_CODE=abcdef" && npm start(Note: Quotes around the variable assignment are required to avoid a trailing whitespace.)
($env:REACT_APP_SECRET_CODE = "abcdef") -and (npm start)REACT_APP_SECRET_CODE=abcdef npm startNote: this feature is available with
[email protected]and higher.
To define permanent environment variables, create a file called .env in the root of your project:
REACT_APP_SECRET_CODE=abcdef
Note: You must create custom environment variables beginning with
REACT_APP_. Any other variables exceptNODE_ENVwill be ignored to avoid accidentally exposing a private key on the machine that could have the same name. Changing any environment variables will require you to restart the development server if it is running.
.env files should be checked into source control (with the exclusion of .env*.local).
Note: this feature is available with
[email protected]and higher.
.env: Default..env.local: Local overrides. This file is loaded for all environments except test..env.development,.env.test,.env.production: Environment-specific settings..env.development.local,.env.test.local,.env.production.local: Local overrides of environment-specific settings.
Files on the left have more priority than files on the right:
npm start:.env.development.local,.env.development,.env.local,.envnpm run build:.env.production.local,.env.production,.env.local,.envnpm test:.env.test.local,.env.test,.env(note.env.localis missing)
These variables will act as the defaults if the machine does not explicitly set them.
Please refer to the dotenv documentation for more details.
Note: If you are defining environment variables for development, your CI and/or hosting platform will most likely need these defined as well. Consult their documentation how to do this. For example, see the documentation for Travis CI or Heroku.
Note: this feature is available with
[email protected]and higher.
Expand variables already on your machine for use in your .env file (using dotenv-expand).
For example, to get the environment variable npm_package_version:
REACT_APP_VERSION=$npm_package_version
# also works:
# REACT_APP_VERSION=${npm_package_version}
Or expand variables local to the current .env file:
DOMAIN=www.example.com
REACT_APP_FOO=$DOMAIN/foo
REACT_APP_BAR=$DOMAIN/bar
Some popular libraries use decorators in their documentation.
Create React App intentionally doesn’t support decorator syntax at the moment because:
- It is an experimental proposal and is subject to change (in fact, it has already changed once, and will change again).
- Most libraries currently support only the old version of the proposal — which will never be a standard.
However in many cases you can rewrite decorator-based code without decorators just as fine.
Please refer to these two threads for reference:
Create React App will add decorator support when the specification advances to a stable stage.
React doesn't prescribe a specific approach to data fetching, but people commonly use either a library like axios or the fetch() API provided by the browser.
The global fetch function allows you to easily make AJAX requests. It takes in a URL as an input and returns a Promise that resolves to a Response object. You can find more information about fetch here.
A Promise represents the eventual result of an asynchronous operation, you can find more information about Promises here and here. Both axios and fetch() use Promises under the hood. You can also use the async / await syntax to reduce the callback nesting.
Make sure the fetch() API and Promises are available in your target audience's browsers.
For example, support in Internet Explorer requires a polyfill.
You can learn more about making AJAX requests from React components in the FAQ entry on the React website.
These tutorials will help you to integrate your app with an API backend running on another port,
using fetch() to access it.
Check out this tutorial. You can find the companion GitHub repository here.
Check out this tutorial. You can find the companion GitHub repository here.
API Platform is a framework designed to build API-driven projects. It allows to create hypermedia and GraphQL APIs in minutes. It is shipped with an official Progressive Web App generator as well as a dynamic administration interface, both built for Create React App. Check out this tutorial.
Note: this feature is available with
[email protected]and higher.
People often serve the front-end React app from the same host and port as their backend implementation.
For example, a production setup might look like this after the app is deployed:
/ - static server returns index.html with React app
/todos - static server returns index.html with React app
/api/todos - server handles any /api/* requests using the backend implementation
Such setup is not required. However, if you do have a setup like this, it is convenient to write requests like fetch('/api/todos') without worrying about redirecting them to another host or port during development.
To tell the development server to proxy any unknown requests to your API server in development, add a proxy field to your package.json, for example:
"proxy": "http://localhost:4000",This way, when you fetch('/api/todos') in development, the development server will recognize that it’s not a static asset, and will proxy your request to http://localhost:4000/api/todos as a fallback. The development server will only attempt to send requests without text/html in its Accept header to the proxy.
Conveniently, this avoids CORS issues and error messages like this in development:
Fetch API cannot load http://localhost:4000/api/todos. No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin 'http://localhost:3000' is therefore not allowed access. If an opaque response serves your needs, set the request's mode to 'no-cors' to fetch the resource with CORS disabled.
Keep in mind that proxy only has effect in development (with npm start), and it is up to you to ensure that URLs like /api/todos point to the right thing in production. You don’t have to use the /api prefix. Any unrecognized request without a text/html accept header will be redirected to the specified proxy.
The proxy option supports HTTP, HTTPS and WebSocket connections.
If the proxy option is not flexible enough for you, alternatively you can:
- Configure the proxy yourself
- Enable CORS on your server (here’s how to do it for Express).
- Use environment variables to inject the right server host and port into your app.
When you enable the proxy option, you opt into a more strict set of host checks. This is necessary because leaving the backend open to remote hosts makes your computer vulnerable to DNS rebinding attacks. The issue is explained in this article and this issue.
This shouldn’t affect you when developing on localhost, but if you develop remotely like described here, you will see this error in the browser after enabling the proxy option:
Invalid Host header
To work around it, you can specify your public development host in a file called .env.development in the root of your project:
HOST=mypublicdevhost.com
If you restart the development server now and load the app from the specified host, it should work.
If you are still having issues or if you’re using a more exotic environment like a cloud editor, you can bypass the host check completely by adding a line to .env.development.local. Note that this is dangerous and exposes your machine to remote code execution from malicious websites:
# NOTE: THIS IS DANGEROUS!
# It exposes your machine to attacks from the websites you visit.
DANGEROUSLY_DISABLE_HOST_CHECK=true
We don’t recommend this approach.
Note: this feature is available with
[email protected]and higher.
If the proxy option is not flexible enough for you, you can get direct access to the Express app instance and hook up your own proxy middleware.
You can use this feature in conjunction with the proxy property in package.json, but it is recommended you consolidate all of your logic into src/setupProxy.js.
First, install http-proxy-middleware using npm or Yarn:
$ npm install http-proxy-middleware --save
$ # or
$ yarn add http-proxy-middlewareNext, create src/setupProxy.js and place the following contents in it:
const proxy = require('http-proxy-middleware');
module.exports = function(app) {
// ...
};You can now register proxies as you wish! Here's an example using the above http-proxy-middleware:
const proxy = require('http-proxy-middleware');
module.exports = function(app) {
app.use(proxy('/api', { target: 'http://localhost:5000/' }));
};Note: You do not need to import this file anywhere. It is automatically registered when you start the development server.
Note: This file only supports Node's JavaScript syntax. Be sure to only use supported language features (i.e. no support for Flow, ES Modules, etc).
Note: Passing the path to the proxy function allows you to use globbing and/or pattern matching on the path, which is more flexible than the express route matching.
Note: this feature is available with
[email protected]and higher.
You may require the dev server to serve pages over HTTPS. One particular case where this could be useful is when using the "proxy" feature to proxy requests to an API server when that API server is itself serving HTTPS.
To do this, set the HTTPS environment variable to true, then start the dev server as usual with npm start:
set HTTPS=true&&npm start(Note: the lack of whitespace is intentional.)
($env:HTTPS = $true) -and (npm start)HTTPS=true npm startNote that the server will use a self-signed certificate, so your web browser will almost definitely display a warning upon accessing the page.
Since Create React App doesn’t support server rendering, you might be wondering how to make <meta> tags dynamic and reflect the current URL. To solve this, we recommend to add placeholders into the HTML, like this:
<!doctype html>
<html lang="en">
<head>
<meta property="og:title" content="__OG_TITLE__">
<meta property="og:description" content="__OG_DESCRIPTION__">Then, on the server, regardless of the backend you use, you can read index.html into memory and replace __OG_TITLE__, __OG_DESCRIPTION__, and any other placeholders with values depending on the current URL. Just make sure to sanitize and escape the interpolated values so that they are safe to embed into HTML!
If you use a Node server, you can even share the route matching logic between the client and the server. However duplicating it also works fine in simple cases.
If you’re hosting your build with a static hosting provider you can use react-snapshot or react-snap to generate HTML pages for each route, or relative link, in your application. These pages will then seamlessly become active, or “hydrated”, when the JavaScript bundle has loaded.
There are also opportunities to use this outside of static hosting, to take the pressure off the server when generating and caching routes.
The primary benefit of pre-rendering is that you get the core content of each page with the HTML payload—regardless of whether or not your JavaScript bundle successfully downloads. It also increases the likelihood that each route of your application will be picked up by search engines.
You can read more about zero-configuration pre-rendering (also called snapshotting) here.
Similarly to the previous section, you can leave some placeholders in the HTML that inject global variables, for example:
<!doctype html>
<html lang="en">
<head>
<script>
window.SERVER_DATA = __SERVER_DATA__;
</script>Then, on the server, you can replace __SERVER_DATA__ with a JSON of real data right before sending the response. The client code can then read window.SERVER_DATA to use it. Make sure to sanitize the JSON before sending it to the client as it makes your app vulnerable to XSS attacks.
Note: this feature is available with
[email protected]and higher.
Read the migration guide to learn how to enable it in older projects!
Create React App uses Jest as its test runner. To prepare for this integration, we did a major revamp of Jest so if you heard bad things about it years ago, give it another try.
Jest is a Node-based runner. This means that the tests always run in a Node environment and not in a real browser. This lets us enable fast iteration speed and prevent flakiness.
While Jest provides browser globals such as window thanks to jsdom, they are only approximations of the real browser behavior. Jest is intended to be used for unit tests of your logic and your components rather than the DOM quirks.
We recommend that you use a separate tool for browser end-to-end tests if you need them. They are beyond the scope of Create React App.
Jest will look for test files with any of the following popular naming conventions:
- Files with
.jssuffix in__tests__folders. - Files with
.test.jssuffix. - Files with
.spec.jssuffix.
The .test.js / .spec.js files (or the __tests__ folders) can be located at any depth under the src top level folder.
We recommend to put the test files (or __tests__ folders) next to the code they are testing so that relative imports appear shorter. For example, if App.test.js and App.js are in the same folder, the test just needs to import App from './App' instead of a long relative path. Colocation also helps find tests more quickly in larger projects.
When you run npm test, Jest will launch in the watch mode. Every time you save a file, it will re-run the tests, just like npm start recompiles the code.
The watcher includes an interactive command-line interface with the ability to run all tests, or focus on a search pattern. It is designed this way so that you can keep it open and enjoy fast re-runs. You can learn the commands from the “Watch Usage” note that the watcher prints after every run:
By default, when you run npm test, Jest will only run the tests related to files changed since the last commit. This is an optimization designed to make your tests run fast regardless of how many tests you have. However it assumes that you don’t often commit the code that doesn’t pass the tests.
Jest will always explicitly mention that it only ran tests related to the files changed since the last commit. You can also press a in the watch mode to force Jest to run all tests.
Jest will always run all tests on a continuous integration server or if the project is not inside a Git or Mercurial repository.
To create tests, add it() (or test()) blocks with the name of the test and its code. You may optionally wrap them in describe() blocks for logical grouping but this is neither required nor recommended.
Jest provides a built-in expect() global function for making assertions. A basic test could look like this:
import sum from './sum';
it('sums numbers', () => {
expect(sum(1, 2)).toEqual(3);
expect(sum(2, 2)).toEqual(4);
});All expect() matchers supported by Jest are extensively documented here.
You can also use jest.fn() and expect(fn).toBeCalled() to create “spies” or mock functions.
There is a broad spectrum of component testing techniques. They range from a “smoke test” verifying that a component renders without throwing, to shallow rendering and testing some of the output, to full rendering and testing component lifecycle and state changes.
Different projects choose different testing tradeoffs based on how often components change, and how much logic they contain. If you haven’t decided on a testing strategy yet, we recommend that you start with creating simple smoke tests for your components:
import React from 'react';
import ReactDOM from 'react-dom';
import App from './App';
it('renders without crashing', () => {
const div = document.createElement('div');
ReactDOM.render(<App />, div);
});This test mounts a component and makes sure that it didn’t throw during rendering. Tests like this provide a lot of value with very little effort so they are great as a starting point, and this is the test you will find in src/App.test.js.
When you encounter bugs caused by changing components, you will gain a deeper insight into which parts of them are worth testing in your application. This might be a good time to introduce more specific tests asserting specific expected output or behavior.
If you’d like to test components in isolation from the child components they render, we recommend using shallow() rendering API from Enzyme. To install it, run:
npm install --save enzyme enzyme-adapter-react-16 react-test-rendererAlternatively you may use yarn:
yarn add enzyme enzyme-adapter-react-16 react-test-rendererAs of Enzyme 3, you will need to install Enzyme along with an Adapter corresponding to the version of React you are using. (The examples above use the adapter for React 16.)
The adapter will also need to be configured in your global setup file:
import { configure } from 'enzyme';
import Adapter from 'enzyme-adapter-react-16';
configure({ adapter: new Adapter() });Note: Keep in mind that if you decide to "eject" before creating
src/setupTests.js, the resultingpackage.jsonfile won't contain any reference to it. Read here to learn how to add this after ejecting.
Now you can write a smoke test with it:
import React from 'react';
import { shallow } from 'enzyme';
import App from './App';
it('renders without crashing', () => {
shallow(<App />);
});Unlike the previous smoke test using ReactDOM.render(), this test only renders <App> and doesn’t go deeper. For example, even if <App> itself renders a <Button> that throws, this test will pass. Shallow rendering is great for isolated unit tests, but you may still want to create some full rendering tests to ensure the components integrate correctly. Enzyme supports full rendering with mount(), and you can also use it for testing state changes and component lifecycle.
You can read the Enzyme documentation for more testing techniques. Enzyme documentation uses Chai and Sinon for assertions but you don’t have to use them because Jest provides built-in expect() and jest.fn() for spies.
Here is an example from Enzyme documentation that asserts specific output, rewritten to use Jest matchers:
import React from 'react';
import { shallow } from 'enzyme';
import App from './App';
it('renders welcome message', () => {
const wrapper = shallow(<App />);
const welcome = <h2>Welcome to React</h2>;
// expect(wrapper.contains(welcome)).toBe(true);
expect(wrapper.contains(welcome)).toEqual(true);
});All Jest matchers are extensively documented here.
Nevertheless you can use a third-party assertion library like Chai if you want to, as described below.
Additionally, you might find jest-enzyme helpful to simplify your tests with readable matchers. The above contains code can be written more simply with jest-enzyme.
expect(wrapper).toContainReact(welcome);To enable this, install jest-enzyme:
npm install --save jest-enzymeAlternatively you may use yarn:
yarn add jest-enzymeImport it in src/setupTests.js to make its matchers available in every test:
import 'jest-enzyme';We recommend that you use expect() for assertions and jest.fn() for spies. If you are having issues with them please file those against Jest, and we’ll fix them. We intend to keep making them better for React, supporting, for example, pretty-printing React elements as JSX.
However, if you are used to other libraries, such as Chai and Sinon, or if you have existing code using them that you’d like to port over, you can import them normally like this:
import sinon from 'sinon';
import { expect } from 'chai';and then use them in your tests like you normally do.
Note: this feature is available with
[email protected]and higher.
If your app uses a browser API that you need to mock in your tests or if you just need a global setup before running your tests, add a src/setupTests.js to your project. It will be automatically executed before running your tests.
For example:
const localStorageMock = {
getItem: jest.fn(),
setItem: jest.fn(),
clear: jest.fn(),
};
global.localStorage = localStorageMock;Note: Keep in mind that if you decide to "eject" before creating
src/setupTests.js, the resultingpackage.jsonfile won't contain any reference to it, so you should manually create the propertysetupTestFrameworkScriptFilein the configuration for Jest, something like the following:
"jest": { // ... "setupTestFrameworkScriptFile": "<rootDir>/src/setupTests.js" }
You can replace it() with xit() to temporarily exclude a test from being executed.
Similarly, fit() lets you focus on a specific test without running any other tests.
Jest has an integrated coverage reporter that works well with ES6 and requires no configuration.
Run npm test -- --coverage (note extra -- in the middle) to include a coverage report like this:
Note that tests run much slower with coverage so it is recommended to run it separately from your normal workflow.
The default Jest coverage configuration can be overridden by adding any of the following supported keys to a Jest config in your package.json.
Supported overrides:
Example package.json:
{
"name": "your-package",
"jest": {
"collectCoverageFrom": [
"src/**/*.{js,jsx}",
"!<rootDir>/node_modules/",
"!<rootDir>/path/to/dir/"
],
"coverageThreshold": {
"global": {
"branches": 90,
"functions": 90,
"lines": 90,
"statements": 90
}
},
"coverageReporters": ["text"],
"snapshotSerializers": ["my-serializer-module"]
}
}By default npm test runs the watcher with interactive CLI. However, you can force it to run tests once and finish the process by setting an environment variable called CI.
When creating a build of your application with npm run build linter warnings are not checked by default. Like npm test, you can force the build to perform a linter warning check by setting the environment variable CI. If any warnings are encountered then the build fails.
Popular CI servers already set the environment variable CI by default but you can do this yourself too:
- Following the Travis Getting started guide for syncing your GitHub repository with Travis. You may need to initialize some settings manually in your profile page.
- Add a
.travis.ymlfile to your git repository.
language: node_js
node_js:
- 8
cache:
directories:
- node_modules
script:
- npm run build
- npm test
- Trigger your first build with a git push.
- Customize your Travis CI Build if needed.
Follow this article to set up CircleCI with a Create React App project.
set CI=true&&npm testset CI=true&&npm run build(Note: the lack of whitespace is intentional.)
($env:CI = $true) -and (npm test)($env:CI = $true) -and (npm run build)CI=true npm testCI=true npm run buildThe test command will force Jest to run tests once instead of launching the watcher.
If you find yourself doing this often in development, please file an issue to tell us about your use case because we want to make watcher the best experience and are open to changing how it works to accommodate more workflows.
The build command will check for linter warnings and fail if any are found.
If you know that none of your tests depend on jsdom, you can safely set --env=node, and your tests will run faster:
"scripts": {
"start": "react-scripts start",
"build": "react-scripts build",
- "test": "react-scripts test"
+ "test": "react-scripts test --env=node"To help you make up your mind, here is a list of APIs that need jsdom:
- Any browser globals like
windowanddocument ReactDOM.render()TestUtils.renderIntoDocument()(a shortcut for the above)mount()in Enzyme
In contrast, jsdom is not needed for the following APIs:
TestUtils.createRenderer()(shallow rendering)shallow()in Enzyme
Finally, jsdom is also not needed for snapshot testing.
Snapshot testing is a feature of Jest that automatically generates text snapshots of your components and saves them on the disk so if the UI output changes, you get notified without manually writing any assertions on the component output. Read more about snapshot testing.
If you use Visual Studio Code, there is a Jest extension which works with Create React App out of the box. This provides a lot of IDE-like features while using a text editor: showing the status of a test run with potential fail messages inline, starting and stopping the watcher automatically, and offering one-click snapshot updates.
There are various ways to setup a debugger for your Jest tests. We cover debugging in Chrome and Visual Studio Code.
Note: debugging tests requires Node 8 or higher.
Add the following to the scripts section in your project's package.json
"scripts": {
"test:debug": "react-scripts --inspect-brk test --runInBand"
}Place debugger; statements in any test and run:
$ npm run test:debugThis will start running your Jest tests, but pause before executing to allow a debugger to attach to the process.
Open the following in Chrome
about:inspect
After opening that link, the Chrome Developer Tools will be displayed. Select inspect on your process and a breakpoint will be set at the first line of the react script (this is done simply to give you time to open the developer tools and to prevent Jest from executing before you have time to do so). Click the button that looks like a "play" button in the upper right hand side of the screen to continue execution. When Jest executes the test that contains the debugger statement, execution will pause and you can examine the current scope and call stack.
Note: the --runInBand cli option makes sure Jest runs test in the same process rather than spawning processes for individual tests. Normally Jest parallelizes test runs across processes but it is hard to debug many processes at the same time.
Debugging Jest tests is supported out of the box for Visual Studio Code.
Use the following launch.json configuration file:
{
"version": "0.2.0",
"configurations": [
{
"name": "Debug CRA Tests",
"type": "node",
"request": "launch",
"runtimeExecutable": "${workspaceRoot}/node_modules/.bin/react-scripts",
"args": [
"test",
"--runInBand",
"--no-cache"
],
"cwd": "${workspaceRoot}",
"protocol": "inspector",
"console": "integratedTerminal",
"internalConsoleOptions": "neverOpen"
}
]
}
Usually, in an app, you have a lot of UI components, and each of them has many different states. For an example, a simple button component could have following states:
- In a regular state, with a text label.
- In the disabled mode.
- In a loading state.
Usually, it’s hard to see these states without running a sample app or some examples.
Create React App doesn’t include any tools for this by default, but you can easily add Storybook for React (source) or React Styleguidist (source) to your project. These are third-party tools that let you develop components and see all their states in isolation from your app.
You can also deploy your Storybook or style guide as a static app. This way, everyone in your team can view and review different states of UI components without starting a backend server or creating an account in your app.
Storybook is a development environment for React UI components. It allows you to browse a component library, view the different states of each component, and interactively develop and test components.
First, install the following npm package globally:
npm install -g @storybook/cliThen, run the following command inside your app’s directory:
getstorybookAfter that, follow the instructions on the screen.
Learn more about React Storybook:
- Learn Storybook (tutorial)
- Documentation
- GitHub Repo
- Snapshot Testing UI with Storybook + addon/storyshot
Styleguidist combines a style guide, where all your components are presented on a single page with their props documentation and usage examples, with an environment for developing components in isolation, similar to Storybook. In Styleguidist you write examples in Markdown, where each code snippet is rendered as a live editable playground.
First, install Styleguidist:
npm install --save react-styleguidistAlternatively you may use yarn:
yarn add react-styleguidistThen, add these scripts to your package.json:
"scripts": {
+ "styleguide": "styleguidist server",
+ "styleguide:build": "styleguidist build",
"start": "react-scripts start",Then, run the following command inside your app’s directory:
npm run styleguideAfter that, follow the instructions on the screen.
Learn more about React Styleguidist:
Create React App doesn't provide any built-in functionality to publish a component to npm. If you're ready to extract a component from your project so other people can use it, we recommend moving it to a separate directory outside of your project and then using a tool like nwb to prepare it for publishing.
The production build has all the tools necessary to generate a first-class Progressive Web App, but the offline/cache-first behavior is opt-in only. By default, the build process will generate a service worker file, but it will not be registered, so it will not take control of your production web app.
In order to opt-in to the offline-first behavior, developers should look for the
following in their src/index.js file:
// If you want your app to work offline and load faster, you can change
// unregister() to register() below. Note this comes with some pitfalls.
// Learn more about service workers: http://bit.ly/CRA-PWA
serviceWorker.unregister();As the comment states, switching serviceWorker.unregister() to
serviceWorker.register() will opt you in to using the service worker.
Offline-first Progressive Web Apps are faster and more reliable than traditional web pages, and provide an engaging mobile experience:
- All static site assets are cached so that your page loads fast on subsequent visits, regardless of network connectivity (such as 2G or 3G). Updates are downloaded in the background.
- Your app will work regardless of network state, even if offline. This means your users will be able to use your app at 10,000 feet and on the subway.
- On mobile devices, your app can be added directly to the user's home screen, app icon and all. This eliminates the need for the app store.
However, they can make debugging deployments more challenging so, starting with Create React App 2, service workers are opt-in.
The workbox-webpack-plugin
is integrated into production configuration,
and it will take care of generating a service worker file that will automatically
precache all of your local assets and keep them up to date as you deploy updates.
The service worker will use a cache-first strategy
for handling all requests for local assets, including
navigation requests
for your HTML, ensuring that your web app is consistently fast, even on a slow
or unreliable network.
If you do decide to opt-in to service worker registration, please take the following into account:
-
Service workers require HTTPS, although to facilitate local testing, that policy does not apply to
localhost. If your production web server does not support HTTPS, then the service worker registration will fail, but the rest of your web app will remain functional. -
Service workers are not supported in older web browsers. Service worker registration won't be attempted on browsers that lack support.
-
The service worker is only enabled in the production environment, e.g. the output of
npm run build. It's recommended that you do not enable an offline-first service worker in a development environment, as it can lead to frustration when previously cached assets are used and do not include the latest changes you've made locally. -
If you need to test your offline-first service worker locally, build the application (using
npm run build) and run a simple http server from your build directory. After running the build script,create-react-appwill give instructions for one way to test your production build locally and the deployment instructions have instructions for using other methods. Be sure to always use an incognito window to avoid complications with your browser cache. -
Users aren't always familiar with offline-first web apps. It can be useful to let the user know when the service worker has finished populating your caches (showing a "This web app works offline!" message) and also let them know when the service worker has fetched the latest updates that will be available the next time they load the page (showing a "New content is available; please refresh." message). Showing this messages is currently left as an exercise to the developer, but as a starting point, you can make use of the logic included in
src/registerServiceWorker.js, which demonstrates which service worker lifecycle events to listen for to detect each scenario, and which as a default, just logs appropriate messages to the JavaScript console. -
By default, the generated service worker file will not intercept or cache any cross-origin traffic, like HTTP API requests, images, or embeds loaded from a different domain.
The default configuration includes a web app manifest located at
public/manifest.json, that you can customize with
details specific to your web application.
When a user adds a web app to their homescreen using Chrome or Firefox on
Android, the metadata in manifest.json determines what
icons, names, and branding colors to use when the web app is displayed.
The Web App Manifest guide
provides more context about what each field means, and how your customizations
will affect your users' experience.
Progressive web apps that have been added to the homescreen will load faster and work offline when there's an active service worker. That being said, the metadata from the web app manifest will still be used regardless of whether or not you opt-in to service worker registration.
Source map explorer analyzes JavaScript bundles using the source maps. This helps you understand where code bloat is coming from.
To add Source map explorer to a Create React App project, follow these steps:
npm install --save source-map-explorerAlternatively you may use yarn:
yarn add source-map-explorerThen in package.json, add the following line to scripts:
"scripts": {
+ "analyze": "source-map-explorer build/static/js/main.*",
"start": "react-scripts start",
"build": "react-scripts build",
"test": "react-scripts test",Then to analyze the bundle run the production build then run the analyze script.
npm run build
npm run analyze
npm run build creates a build directory with a production build of your app. Set up your favorite HTTP server so that a visitor to your site is served index.html, and requests to static paths like /static/js/main.<hash>.js are served with the contents of the /static/js/main.<hash>.js file.
For environments using Node, the easiest way to handle this would be to install serve and let it handle the rest:
npm install -g serve
serve -s buildThe last command shown above will serve your static site on the port 5000. Like many of serve’s internal settings, the port can be adjusted using the -p or --port flags.
Run this command to get a full list of the options available:
serve -hYou don’t necessarily need a static server in order to run a Create React App project in production. It works just as fine integrated into an existing dynamic one.
Here’s a programmatic example using Node and Express:
const express = require('express');
const path = require('path');
const app = express();
app.use(express.static(path.join(__dirname, 'build')));
app.get('/', function(req, res) {
res.sendFile(path.join(__dirname, 'build', 'index.html'));
});
app.listen(9000);The choice of your server software isn’t important either. Since Create React App is completely platform-agnostic, there’s no need to explicitly use Node.
The build folder with static assets is the only output produced by Create React App.
However this is not quite enough if you use client-side routing. Read the next section if you want to support URLs like /todos/42 in your single-page app.
If you use routers that use the HTML5 pushState history API under the hood (for example, React Router with browserHistory), many static file servers will fail. For example, if you used React Router with a route for /todos/42, the development server will respond to localhost:3000/todos/42 properly, but an Express serving a production build as above will not.
This is because when there is a fresh page load for a /todos/42, the server looks for the file build/todos/42 and does not find it. The server needs to be configured to respond to a request to /todos/42 by serving index.html. For example, we can amend our Express example above to serve index.html for any unknown paths:
app.use(express.static(path.join(__dirname, 'build')));
-app.get('/', function (req, res) {
+app.get('/*', function (req, res) {
res.sendFile(path.join(__dirname, 'build', 'index.html'));
});If you’re using Apache HTTP Server, you need to create a .htaccess file in the public folder that looks like this:
Options -MultiViews
RewriteEngine On
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^ index.html [QSA,L]
It will get copied to the build folder when you run npm run build.
If you’re using Apache Tomcat, you need to follow this Stack Overflow answer.
Now requests to /todos/42 will be handled correctly both in development and in production.
On a production build, and when you've opted-in,
a service worker will automatically handle all navigation requests, like for
/todos/42, by serving the cached copy of your index.html. This
service worker navigation routing can be configured or disabled by
ejecting and then modifying the
navigateFallback
and navigateFallbackWhitelist
options of the SWPreachePlugin configuration.
When users install your app to the homescreen of their device the default configuration will make a shortcut to /index.html. This may not work for client-side routers which expect the app to be served from /. Edit the web app manifest at public/manifest.json and change start_url to match the required URL scheme, for example:
"start_url": ".",By default, Create React App produces a build assuming your app is hosted at the server root.
To override this, specify the homepage in your package.json, for example:
"homepage": "http://mywebsite.com/relativepath",This will let Create React App correctly infer the root path to use in the generated HTML file.
Note: If you are using react-router@^4, you can root <Link>s using the basename prop on any <Router>.
More information here.
For example:
<BrowserRouter basename="/calendar"/>
<Link to="/today"/> // renders <a href="/calendar/today">Note: this feature is available with
[email protected]and higher.
If you are not using the HTML5 pushState history API or not using client-side routing at all, it is unnecessary to specify the URL from which your app will be served. Instead, you can put this in your package.json:
"homepage": ".",This will make sure that all the asset paths are relative to index.html. You will then be able to move your app from http://mywebsite.com to http://mywebsite.com/relativepath or even http://mywebsite.com/relative/path without having to rebuild it.
You can create an arbitrary build environment by creating a custom .env file and loading it using env-cmd.
For example, to create a build environment for a staging environment:
- Create a file called
.env.staging - Set environment variables as you would any other
.envfile (e.g.REACT_APP_API_URL=http://api-staging.example.com) - Install env-cmd
$ npm install env-cmd --save $ # or $ yarn add env-cmd - Add a new script to your
package.json, building with your new environment:{ "scripts": { "build:staging": "env-cmd .env.staging npm run build" } }
Now you can run npm run build:staging to build with the staging environment config.
You can specify other environments in the same way.
Variables in .env.production will be used as fallback because NODE_ENV will always be set to production for a build.
See this blog post on how to deploy your React app to Microsoft Azure.
See this blog post or this repo for a way to use automatic deployment to Azure App Service.
Install the Firebase CLI if you haven’t already by running npm install -g firebase-tools. Sign up for a Firebase account and create a new project. Run firebase login and login with your previous created Firebase account.
Then run the firebase init command from your project’s root. You need to choose the Hosting: Configure and deploy Firebase Hosting sites and choose the Firebase project you created in the previous step. You will need to agree with database.rules.json being created, choose build as the public directory, and also agree to Configure as a single-page app by replying with y.
=== Project Setup
First, let's associate this project directory with a Firebase project.
You can create multiple project aliases by running firebase use --add,
but for now we'll just set up a default project.
? What Firebase project do you want to associate as default? Example app (example-app-fd690)
=== Database Setup
Firebase Realtime Database Rules allow you to define how your data should be
structured and when your data can be read from and written to.
? What file should be used for Database Rules? database.rules.json
✔ Database Rules for example-app-fd690 have been downloaded to database.rules.json.
Future modifications to database.rules.json will update Database Rules when you run
firebase deploy.
=== Hosting Setup
Your public directory is the folder (relative to your project directory) that
will contain Hosting assets to uploaded with firebase deploy. If you
have a build process for your assets, use your build's output directory.
? What do you want to use as your public directory? build
? Configure as a single-page app (rewrite all urls to /index.html)? Yes
✔ Wrote build/index.html
i Writing configuration info to firebase.json...
i Writing project information to .firebaserc...
✔ Firebase initialization complete!IMPORTANT: you need to set proper HTTP caching headers for service-worker.js file in firebase.json file or you will not be able to see changes after first deployment (issue #2440). It should be added inside "hosting" key like next:
{
"hosting": {
...
"headers": [
{"source": "/service-worker.js", "headers": [{"key": "Cache-Control", "value": "no-cache"}]}
]
...
Now, after you create a production build with npm run build, you can deploy it by running firebase deploy.
=== Deploying to 'example-app-fd690'...
i deploying database, hosting
✔ database: rules ready to deploy.
i hosting: preparing build directory for upload...
Uploading: [============================== ] 75%✔ hosting: build folder uploaded successfully
✔ hosting: 8 files uploaded successfully
i starting release process (may take several minutes)...
✔ Deploy complete!
Project Console: https://console.firebase.google.com/project/example-app-fd690/overview
Hosting URL: https://example-app-fd690.firebaseapp.comFor more information see Add Firebase to your JavaScript Project.
Note: this feature is available with
[email protected]and higher.
The step below is important!
If you skip it, your app will not deploy correctly.
Open your package.json and add a homepage field for your project:
"homepage": "https://myusername.github.io/my-app",or for a GitHub user page:
"homepage": "https://myusername.github.io",or for a custom domain page:
"homepage": "https://mywebsite.com",Create React App uses the homepage field to determine the root URL in the built HTML file.
Now, whenever you run npm run build, you will see a cheat sheet with instructions on how to deploy to GitHub Pages.
To publish it at https://myusername.github.io/my-app, run:
npm install --save gh-pagesAlternatively you may use yarn:
yarn add gh-pagesAdd the following scripts in your package.json:
"scripts": {
+ "predeploy": "npm run build",
+ "deploy": "gh-pages -d build",
"start": "react-scripts start",
"build": "react-scripts build",The predeploy script will run automatically before deploy is run.
If you are deploying to a GitHub user page instead of a project page you'll need to make two additional modifications:
- First, change your repository's source branch to be any branch other than master.
- Additionally, tweak your
package.jsonscripts to push deployments to master:
"scripts": {
"predeploy": "npm run build",
- "deploy": "gh-pages -d build",
+ "deploy": "gh-pages -b master -d build",Then run:
npm run deployFinally, make sure GitHub Pages option in your GitHub project settings is set to use the gh-pages branch:
You can configure a custom domain with GitHub Pages by adding a CNAME file to the public/ folder.
Your CNAME file should look like this:
mywebsite.com
GitHub Pages doesn’t support routers that use the HTML5 pushState history API under the hood (for example, React Router using browserHistory). This is because when there is a fresh page load for a url like http://user.github.io/todomvc/todos/42, where /todos/42 is a frontend route, the GitHub Pages server returns 404 because it knows nothing of /todos/42. If you want to add a router to a project hosted on GitHub Pages, here are a couple of solutions:
- You could switch from using HTML5 history API to routing with hashes. If you use React Router, you can switch to
hashHistoryfor this effect, but the URL will be longer and more verbose (for example,http://user.github.io/todomvc/#/todos/42?_k=yknaj). Read more about different history implementations in React Router. - Alternatively, you can use a trick to teach GitHub Pages to handle 404 by redirecting to your
index.htmlpage with a special redirect parameter. You would need to add a404.htmlfile with the redirection code to thebuildfolder before deploying your project, and you’ll need to add code handling the redirect parameter toindex.html. You can find a detailed explanation of this technique in this guide.
If, when deploying, you get /dev/tty: No such a device or address or a similar error, try the following:
- Create a new Personal Access Token
git remote set-url origin https://<user>:<token>@github.com/<user>/<repo>.- Try
npm run deployagain
If, when deploying, you get Cannot read property 'email' of null, try the following:
git config --global user.name '<your_name>'git config --global user.email '<your_email>'- Try
npm run deployagain
Use the Heroku Buildpack for Create React App.
You can find instructions in Deploying React with Zero Configuration.
Sometimes npm run build works locally but fails during deploy via Heroku. Following are the most common cases.
If you get something like this:
remote: Failed to create a production build. Reason:
remote: Module not found: Error: Cannot resolve 'file' or 'directory'
MyDirectory in /tmp/build_1234/src
It means you need to ensure that the lettercase of the file or directory you import matches the one you see on your filesystem or on GitHub.
This is important because Linux (the operating system used by Heroku) is case sensitive. So MyDirectory and mydirectory are two distinct directories and thus, even though the project builds locally, the difference in case breaks the import statements on Heroku remotes.
If you exclude or ignore necessary files from the package you will see a error similar this one:
remote: Could not find a required file.
remote: Name: `index.html`
remote: Searched in: /tmp/build_a2875fc163b209225122d68916f1d4df/public
remote:
remote: npm ERR! Linux 3.13.0-105-generic
remote: npm ERR! argv "/tmp/build_a2875fc163b209225122d68916f1d4df/.heroku/node/bin/node" "/tmp/build_a2875fc163b209225122d68916f1d4df/.heroku/node/bin/npm" "run" "build"
In this case, ensure that the file is there with the proper lettercase and that’s not ignored on your local .gitignore or ~/.gitignore_global.
To do a manual deploy to Netlify’s CDN:
npm install netlify-cli -g
netlify deployChoose build as the path to deploy.
To setup continuous delivery:
With this setup Netlify will build and deploy when you push to git or open a pull request:
- Start a new netlify project
- Pick your Git hosting service and select your repository
- Click
Build your site
Support for client-side routing:
To support pushState, make sure to create a public/_redirects file with the following rewrite rules:
/* /index.html 200
When you build the project, Create React App will place the public folder contents into the build output.
Now offers a zero-configuration single-command deployment. You can use now to deploy your app for free.
-
Install the
nowcommand-line tool either via the recommended desktop tool or via node withnpm install -g now. -
Build your app by running
npm run build. -
Move into the build directory by running
cd build. -
Run
now --name your-project-namefrom within the build directory. You will see a now.sh URL in your output like this:> Ready! https://your-project-name-tpspyhtdtk.now.sh (copied to clipboard)Paste that URL into your browser when the build is complete, and you will see your deployed app.
Details are available in this article.
S3 and CloudFront
See this blog post on how to deploy your React app to Amazon Web Services S3 and CloudFront.
Install the Surge CLI if you haven’t already by running npm install -g surge. Run the surge command and log in you or create a new account.
When asked about the project path, make sure to specify the build folder, for example:
project path: /path/to/project/buildNote that in order to support routers that use HTML5 pushState API, you may want to rename the index.html in your build folder to 200.html before deploying to Surge. This ensures that every URL falls back to that file.
You can adjust various development and production settings by setting environment variables in your shell or with .env.
| Variable | Development | Production | Usage |
|---|---|---|---|
| BROWSER | ✅ | ❌ | By default, Create React App will open the default system browser, favoring Chrome on macOS. Specify a browser to override this behavior, or set it to none to disable it completely. If you need to customize the way the browser is launched, you can specify a node script instead. Any arguments passed to npm start will also be passed to this script, and the url where your app is served will be the last argument. Your script's file name must have the .js extension. |
| HOST | ✅ | ❌ | By default, the development web server binds to localhost. You may use this variable to specify a different host. |
| PORT | ✅ | ❌ | By default, the development web server will attempt to listen on port 3000 or prompt you to attempt the next available port. You may use this variable to specify a different port. |
| HTTPS | ✅ | ❌ | When set to true, Create React App will run the development server in https mode. |
| PUBLIC_URL | ❌ | ✅ | Create React App assumes your application is hosted at the serving web server's root or a subpath as specified in package.json (homepage). Normally, Create React App ignores the hostname. You may use this variable to force assets to be referenced verbatim to the url you provide (hostname included). This may be particularly useful when using a CDN to host your application. |
| CI | 🔶 | ✅ | When set to true, Create React App treats warnings as failures in the build. It also makes the test runner non-watching. Most CIs set this flag by default. |
| REACT_EDITOR | ✅ | ❌ | When an app crashes in development, you will see an error overlay with clickable stack trace. When you click on it, Create React App will try to determine the editor you are using based on currently running processes, and open the relevant source file. You can send a pull request to detect your editor of choice. Setting this environment variable overrides the automatic detection. If you do it, make sure your systems PATH environment variable points to your editor’s bin folder. You can also set it to none to disable it completely. |
| CHOKIDAR_USEPOLLING | ✅ | ❌ | When set to true, the watcher runs in polling mode, as necessary inside a VM. Use this option if npm start isn't detecting changes. |
| GENERATE_SOURCEMAP | ❌ | ✅ | When set to false, source maps are not generated for a production build. This solves OOM issues on some smaller machines. |
| NODE_PATH | ✅ | ✅ | Same as NODE_PATH in Node.js, but only relative folders are allowed. Can be handy for emulating a monorepo setup by setting NODE_PATH=src. |
When you save a file while npm start is running, the browser should refresh with the updated code.
If this doesn’t happen, try one of the following workarounds:
- If your project is in a Dropbox folder, try moving it out.
- If the watcher doesn’t see a file called
index.jsand you’re referencing it by the folder name, you need to restart the watcher due to a Webpack bug. - Some editors like Vim and IntelliJ have a “safe write” feature that currently breaks the watcher. You will need to disable it. Follow the instructions in “Adjusting Your Text Editor”.
- If your project path contains parentheses, try moving the project to a path without them. This is caused by a Webpack watcher bug.
- On Linux and macOS, you might need to tweak system settings to allow more watchers.
- If the project runs inside a virtual machine such as (a Vagrant provisioned) VirtualBox, create an
.envfile in your project directory if it doesn’t exist, and addCHOKIDAR_USEPOLLING=trueto it. This ensures that the next time you runnpm start, the watcher uses the polling mode, as necessary inside a VM.
If none of these solutions help please leave a comment in this thread.
If you run npm test and the console gets stuck after printing react-scripts test to the console there might be a problem with your Watchman installation as described in facebook/create-react-app#713.
We recommend deleting node_modules in your project and running npm install (or yarn if you use it) first. If it doesn't help, you can try one of the numerous workarounds mentioned in these issues:
It is reported that installing Watchman 4.7.0 or newer fixes the issue. If you use Homebrew, you can run these commands to update it:
watchman shutdown-server
brew update
brew reinstall watchman
You can find other installation methods on the Watchman documentation page.
If this still doesn’t help, try running launchctl unload -F ~/Library/LaunchAgents/com.github.facebook.watchman.plist.
There are also reports that uninstalling Watchman fixes the issue. So if nothing else helps, remove it from your system and try again.
It is reported that npm run build can fail on machines with limited memory and no swap space, which is common in cloud environments. Even with small projects this command can increase RAM usage in your system by hundreds of megabytes, so if you have less than 1 GB of available memory your build is likely to fail with the following message:
The build failed because the process exited too early. This probably means the system ran out of memory or someone called
kill -9on the process.
If you are completely sure that you didn't terminate the process, consider adding some swap space to the machine you’re building on, or build the project locally.
This may be a problem with case sensitive filenames. Please refer to this section.
If you use a Moment.js, you might notice that only the English locale is available by default. This is because the locale files are large, and you probably only need a subset of all the locales provided by Moment.js.
To add a specific Moment.js locale to your bundle, you need to import it explicitly.
For example:
import moment from 'moment';
import 'moment/locale/fr';If you are importing multiple locales this way, you can later switch between them by calling moment.locale() with the locale name:
import moment from 'moment';
import 'moment/locale/fr';
import 'moment/locale/es';
// ...
moment.locale('fr');This will only work for locales that have been explicitly imported before.
Before [email protected], this problem was caused by third party node_modules using modern JavaScript features because the minifier couldn't handle them during the build. This has been solved by compiling standard modern JavaScript features inside node_modules in [email protected] and higher.
If you're seeing this error, you're likely using an old version of react-scripts. You can either fix it by avoiding a dependency that uses modern syntax, or by upgrading to react-scripts@>=2.0.0 and following the migration instructions in the changelog.
Ejecting lets you customize anything, but from that point on you have to maintain the configuration and scripts yourself. This can be daunting if you have many similar projects. In such cases instead of ejecting we recommend to fork react-scripts and any other packages you need. This article dives into how to do it in depth. You can find more discussion in this issue.
If you have ideas for more “How To” recipes that should be on this page, let us know or contribute some!