RHEL and CentOS
kABI-tracking kmod or DKMS style packages are provided for RHEL / CentOS based distributions from the official zfsonlinux.org repository. These packages track the official ZFS on Linux tags and are updated as new versions are released. Packages are available for the following configurations:
EL Releases: 6.x, 7.x, 8.x
Architectures: x86_64
To simplify installation a zfs-release package is provided which includes a zfs.repo configuration file and the ZFS on Linux public signing key. All official ZFS on Linux packages are signed using this key, and by default yum will verify a package's signature before allowing it be to installed. Users are strongly encouraged to verify the authenticity of the ZFS on Linux public key using the fingerprint listed here.
Location: /etc/pki/rpm-gpg/RPM-GPG-KEY-zfsonlinux
EL6 Package: http://download.zfsonlinux.org/epel/zfs-release.el6.noarch.rpm
EL7.5 Package: http://download.zfsonlinux.org/epel/zfs-release.el7_5.noarch.rpm
EL7.6 Package: http://download.zfsonlinux.org/epel/zfs-release.el7_6.noarch.rpm
EL7.7 Package: http://download.zfsonlinux.org/epel/zfs-release.el7_7.noarch.rpm
EL8.0 Package: http://download.zfsonlinux.org/epel/zfs-release.el8_0.noarch.rpm
EL8.1 Package: http://download.zfsonlinux.org/epel/zfs-release.el8_1.noarch.rpm
Note: Starting with EL7.7 zfs-0.8 will become the default, EL7.6 and older will continue to track the zfs-0.7 point releases.
Download from: pgp.mit.edu
Fingerprint: C93A FFFD 9F3F 7B03 C310 CEB6 A9D5 A1C0 F14A B620
$ sudo yum install http://download.zfsonlinux.org/epel/zfs-release.<dist>.noarch.rpm
$ gpg --quiet --with-fingerprint /etc/pki/rpm-gpg/RPM-GPG-KEY-zfsonlinux
pub 2048R/F14AB620 2013-03-21 ZFS on Linux <[email protected]>
Key fingerprint = C93A FFFD 9F3F 7B03 C310 CEB6 A9D5 A1C0 F14A B620
sub 2048R/99685629 2013-03-21
After installing the zfs-release package and verifying the public key users can opt to install ether the kABI-tracking kmod or DKMS style packages. For most users the kABI-tracking kmod packages are recommended in order to avoid needing to rebuild ZFS for every kernel update. DKMS packages are recommended for users running a non-distribution kernel or for users who wish to apply local customizations to ZFS on Linux.
By default the zfs-release package is configured to install DKMS style packages so they will work with a wide range of kernels. In order to install the kABI-tracking kmods the default repository in the /etc/yum.repos.d/zfs.repo file must be switch from zfs to zfs-kmod. Keep in mind that the kABI-tracking kmods are only verified to work with the distribution provided kernel.
# /etc/yum.repos.d/zfs.repo
[zfs]
name=ZFS on Linux for EL 7 - dkms
baseurl=http://download.zfsonlinux.org/epel/7/$basearch/
-enabled=1
+enabled=0
metadata_expire=7d
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-zfsonlinux
@@ -9,7 +9,7 @@
[zfs-kmod]
name=ZFS on Linux for EL 7 - kmod
baseurl=http://download.zfsonlinux.org/epel/7/kmod/$basearch/
-enabled=0
+enabled=1
metadata_expire=7d
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-zfsonlinuxThe ZFS on Linux packages can now be installed using yum.
$ sudo yum install zfs
To install DKMS style packages issue the following yum commands. First add the EPEL repository which provides DKMS by installing the epel-release package, then the kernel-devel and zfs packages. Note that it is important to make sure that the matching kernel-devel package is installed for the running kernel since DKMS requires it to build ZFS.
$ sudo yum install epel-release
$ sudo yum install "kernel-devel-uname-r == $(uname -r)" zfs
When updating to a new RHEL/CentOS 7.x release the existing kmod packages will not work due to upstream kABI changes in the kernel. After upgrading to 7.x users must uninstall ZFS and then reinstall it as described in the kABI-tracking kmod section. Compatible kmod packages will be installed from the matching CentOS 7.x repository.
$ sudo yum remove zfs zfs-kmod spl spl-kmod libzfs2 libnvpair1 libuutil1 libzpool2 zfs-release
$ sudo yum install http://download.zfsonlinux.org/epel/zfs-release.el7_6.noarch.rpm
$ sudo yum autoremove
$ sudo yum clean metadata
$ sudo yum install zfs
When switching from DKMS to kABI-tracking kmods first uninstall the existing DKMS packages. This should remove the kernel modules for all installed kernels but in practice it's not always perfectly reliable. Therefore, it's recommended that you manually remove any remaining ZFS kernel modules as shown. At this point the kABI-tracking kmods can be installed as described in the section above.
$ sudo yum remove zfs zfs-kmod spl spl-kmod libzfs2 libnvpair1 libuutil1 libzpool2 zfs-release
$ sudo find /lib/modules/ \( -name "splat.ko" -or -name "zcommon.ko" \
-or -name "zpios.ko" -or -name "spl.ko" -or -name "zavl.ko" -or \
-name "zfs.ko" -or -name "znvpair.ko" -or -name "zunicode.ko" \) \
-exec /bin/rm {} \;
In addition to the primary zfs repository a zfs-testing repository is available. This repository, which is disabled by default, contains the latest version of ZFS on Linux which is under active development. These packages are made available in order to get feedback from users regarding the functionality and stability of upcoming releases. These packages should not be used on production systems. Packages from the testing repository can be installed as follows.
$ sudo yum --enablerepo=zfs-testing install kernel-devel zfs
