Rmq move out as an extra module

docs/source/concepts.md

@@ -32,7 +32,7 @@ WorkChains support the use of logical constructs such as `If_` and `While_` to c
 
 A `Controller` can control processes throughout their lifetime, by sending and receiving messages. It can launch, pause, continue, kill and check status of the process.
 
-The {py:class}`~plumpy.process_comms.RemoteProcessThreadController` can communicate with the process over the thread communicator provided by {{kiwipy}} which can subscribe and send messages over the {{rabbitmq}} message broker.
+The {py:class}`~plumpy.rmq.process_control.RemoteProcessThreadController` can communicate with the process over the thread communicator provided by {{kiwipy}} which can subscribe and send messages over the {{rabbitmq}} message broker.
 
 The thread communicator runs on a independent thread (event loop) and so will not be blocked by sometimes long waiting times in the process event loop.
 Using RabbitMQ means that  even if the computer is terminated unexpectedly, messages are persisted and can be run once the computer restarts.

docs/source/nitpick-exceptions

@@ -23,7 +23,7 @@ py:class plumpy.base.state_machine.State
 py:class State
 py:class Process
 py:class plumpy.futures.CancellableAction
-py:class plumpy.communications.LoopCommunicator
+py:class plumpy.rmq.communications.LoopCommunicator
 py:class plumpy.persistence.PersistedPickle
 py:class plumpy.utils.AttributesFrozendict
 py:class plumpy.workchains._FunctionCall

docs/source/tutorial.ipynb

@@ -66,7 +66,7 @@
     "The {py:class}`~plumpy.workchains.WorkChain`\n",
     ": A subclass of `Process` that allows for running a process as a set of discrete steps (also known as instructions), with the ability to save the state of the process after each instruction has completed.\n",
     "\n",
-    "The process `Controller` (principally the {py:class}`~plumpy.process_comms.RemoteProcessThreadController`)\n",
+    "The process `Controller` (principally the {py:class}`~plumpy.rmq.process_control.RemoteProcessThreadController`)\n",
     ": To control the process or workchain throughout its lifetime."
    ]
   },

src/plumpy/__init__.py

@@ -4,18 +4,21 @@
 
 import logging
 
-from .communications import *
+# interfaces
+from .controller import ProcessController
+from .coordinator import Coordinator
 from .events import *
 from .exceptions import *
 from .futures import *
 from .loaders import *
+from .message import *
 from .mixins import *
 from .persistence import *
 from .ports import *
-from .process_comms import *
 from .process_listener import *
 from .process_states import *
 from .processes import *
+from .rmq import *
 from .utils import *
 from .workchains import *
 
@@ -27,14 +30,13 @@
     + futures.__all__
     + mixins.__all__
     + persistence.__all__
-    + communications.__all__
-    + process_comms.__all__
+    + message.__all__
     + process_listener.__all__
     + workchains.__all__
     + loaders.__all__
     + ports.__all__
     + process_states.__all__
-)
+) + ['ProcessController', 'Coordinator']
 
 
 # Do this se we don't get the "No handlers could be found..." warnings that will be produced

src/plumpy/controller.py

@@ -0,0 +1,116 @@
+# -*- coding: utf-8 -*-
+from __future__ import annotations
+
+from collections.abc import Sequence
+from typing import Any, Protocol
+
+from plumpy import loaders
+from plumpy.message import MessageType
+from plumpy.utils import PID_TYPE
+
+ProcessResult = Any
+ProcessStatus = Any
+
+
+class ProcessController(Protocol):
+    """
+    Control processes using coroutines that will send messages and wait
+    (in a non-blocking way) for their response
+    """
+
+    def get_status(self, pid: 'PID_TYPE') -> ProcessStatus:
+        """
+        Get the status of a process with the given PID
+        :param pid: the process id
+        :return: the status response from the process
+        """
+        ...
+
+    def pause_process(self, pid: 'PID_TYPE', msg: Any | None = None) -> ProcessResult:
+        """
+        Pause the process
+
+        :param pid: the pid of the process to pause
+        :param msg: optional pause message
+        :return: True if paused, False otherwise
+        """
+        ...
+
+    def play_process(self, pid: 'PID_TYPE') -> ProcessResult:
+        """
+        Play the process
+
+        :param pid: the pid of the process to play
+        :return: True if played, False otherwise
+        """
+        ...
+
+    def kill_process(self, pid: 'PID_TYPE', msg: MessageType | None = None) -> ProcessResult:
+        """
+        Kill the process
+
+        :param pid: the pid of the process to kill
+        :param msg: optional kill message
+        :return: True if killed, False otherwise
+        """
+        ...
+
+    def continue_process(
+        self, pid: 'PID_TYPE', tag: str | None = None, nowait: bool = False, no_reply: bool = False
+    ) -> ProcessResult | None:
+        """
+        Continue the process
+
+        :param _communicator: the communicator
+        :param pid: the pid of the process to continue
+        :param tag: the checkpoint tag to continue from
+        """
+        ...
+
+    async def launch_process(
+        self,
+        process_class: str,
+        init_args: Sequence[Any] | None = None,
+        init_kwargs: dict[str, Any] | None = None,
+        persist: bool = False,
+        loader: loaders.ObjectLoader | None = None,
+        nowait: bool = False,
+        no_reply: bool = False,
+    ) -> ProcessResult:
+        """
+        Launch a process given the class and constructor arguments
+
+        :param process_class: the class of the process to launch
+        :param init_args: the constructor positional arguments
+        :param init_kwargs: the constructor keyword arguments
+        :param persist: should the process be persisted
+        :param loader: the classloader to use
+        :param nowait: if True, don't wait for the process to send a response, just return the pid
+        :param no_reply: if True, this call will be fire-and-forget, i.e. no return value
+        :return: the result of launching the process
+        """
+        ...
+
+    async def execute_process(
+        self,
+        process_class: str,
+        init_args: Sequence[Any] | None = None,
+        init_kwargs: dict[str, Any] | None = None,
+        loader: loaders.ObjectLoader | None = None,
+        nowait: bool = False,
+        no_reply: bool = False,
+    ) -> ProcessResult:
+        """
+        Execute a process.  This call will first send a create task and then a continue task over
+        the communicator.  This means that if communicator messages are durable then the process
+        will run until the end even if this interpreter instance ceases to exist.
+
+        :param process_class: the process class to execute
+        :param init_args: the positional arguments to the class constructor
+        :param init_kwargs: the keyword arguments to the class constructor
+        :param loader: the class loader to use
+        :param nowait: if True, don't wait for the process to send a response
+        :param no_reply: if True, this call will be fire-and-forget, i.e. no return value
+        :return: the result of executing the process
+        """
+        ...

src/plumpy/coordinator.py

@@ -0,0 +1,52 @@
+# -*- coding: utf-8 -*-
+from __future__ import annotations
+
+from typing import TYPE_CHECKING, Any, Callable, Hashable, Pattern, Protocol
+
+if TYPE_CHECKING:
+    # identifiers for subscribers
+    ID_TYPE = Hashable
+    Subscriber = Callable[..., Any]
+    # RPC subscriber params: communicator, msg
+    RpcSubscriber = Callable[['Coordinator', Any], Any]
+    # Task subscriber params: communicator, task
+    TaskSubscriber = Callable[['Coordinator', Any], Any]
+    # Broadcast subscribers params: communicator, body, sender, subject, correlation id
+    BroadcastSubscriber = Callable[['Coordinator', Any, Any, Any, ID_TYPE], Any]
+
+
+class Coordinator(Protocol):
+    # XXX: naming - 'add_message_handler'
+    def add_rpc_subscriber(self, subscriber: 'RpcSubscriber', identifier: 'ID_TYPE | None' = None) -> Any: ...
+
+    # XXX: naming - 'add_broadcast_handler'
+    def add_broadcast_subscriber(
+        self,
+        subscriber: 'BroadcastSubscriber',
+        subject_filters: list[Hashable | Pattern[str]] | None = None,
+        sender_filters: list[Hashable | Pattern[str]] | None = None,
+        identifier: 'ID_TYPE | None' = None,
+    ) -> Any: ...
+
+    # XXX: naming - absorbed into 'add_message_handler'
+    def add_task_subscriber(self, subscriber: 'TaskSubscriber', identifier: 'ID_TYPE | None' = None) -> 'ID_TYPE': ...
+
+    def remove_rpc_subscriber(self, identifier: 'ID_TYPE | None') -> None: ...
+
+    def remove_broadcast_subscriber(self, identifier: 'ID_TYPE | None') -> None: ...
+
+    def remove_task_subscriber(self, identifier: 'ID_TYPE') -> None: ...
+
+    def rpc_send(self, recipient_id: Hashable, msg: Any) -> Any: ...
+
+    def broadcast_send(
+        self,
+        body: Any | None,
+        sender: 'ID_TYPE | None' = None,
+        subject: str | None = None,
+        correlation_id: 'ID_TYPE | None' = None,
+    ) -> Any: ...
+
+    def task_send(self, task: Any, no_reply: bool = False) -> Any: ...
+
+    def close(self) -> None: ...

src/plumpy/exceptions.py

@@ -1,16 +1,23 @@
 # -*- coding: utf-8 -*-
 from typing import Optional
 
-__all__ = ['ClosedError', 'InvalidStateError', 'KilledError', 'PersistenceError', 'UnsuccessfulResult']
+__all__ = [
+    'ClosedError',
+    'CoordinatorConnectionError',
+    'CoordinatorTimeoutError',
+    'InvalidStateError',
+    'KilledError',
+    'PersistenceError',
+    'UnsuccessfulResult',
+]
 
 
 class KilledError(Exception):
     """The process was killed."""
 
 
 class InvalidStateError(Exception):
-    """
-    Raised when an operation is attempted that requires the process to be in a state
+    """Raised when an operation is attempted that requires the process to be in a state
     that is different from the current state
     """
 
@@ -33,3 +40,19 @@ class PersistenceError(Exception):
 
 class ClosedError(Exception):
     """Raised when an mutable operation is attempted on a closed process"""
+
+
+class TaskRejectedError(Exception):
+    """A task was rejected by the coordinacor"""
+
+
+class CoordinatorCommunicationError(Exception):
+    """Generic coordinator communication error"""
+
+
+class CoordinatorConnectionError(ConnectionError):
+    """Raised when coordinator cannot be connected"""
+
+
+class CoordinatorTimeoutError(TimeoutError):
+    """Raised when communicate with coordinator timeout"""

src/plumpy/futures.py

@@ -3,25 +3,36 @@
 Module containing future related methods and classes
 """
 
+from __future__ import annotations
+
 import asyncio
-from typing import Any, Awaitable, Callable, Optional
+import contextlib
+from typing import Any, Awaitable, Callable, Generator, Optional
 
-import kiwipy
+__all__ = ['CancellableAction', 'Future', 'capture_exceptions', 'create_task', 'create_task']
 
-__all__ = ['CancelledError', 'Future', 'chain', 'copy_future', 'create_task', 'gather']
 
-CancelledError = kiwipy.CancelledError
+class InvalidFutureError(Exception):
+    """Exception for when a future or action is in an invalid state"""
 
 
-class InvalidStateError(Exception):
-    """Exception for when a future or action is in an invalid state"""
+Future = asyncio.Future
 
 
-copy_future = kiwipy.copy_future
-chain = kiwipy.chain
-gather = asyncio.gather
+@contextlib.contextmanager
+def capture_exceptions(future, ignore: tuple[type[BaseException], ...] = ()) -> Generator[None, Any, None]:  # type: ignore[no-untyped-def]
+    """
+    Capture any exceptions in the context and set them as the result of the given future
 
-Future = asyncio.Future
+    :param future: The future to the exception on
+    :param ignore: An optional list of exception types to ignore, these will be raised and not set on the future
+    """
+    try:
+        yield
+    except ignore:
+        raise
+    except Exception as exception:
+        future.set_exception(exception)
 
 
 class CancellableAction(Future):
@@ -46,10 +57,10 @@ def run(self, *args: Any, **kwargs: Any) -> None:
         :param kwargs: the keyword arguments to the action
         """
         if self.done():
-            raise InvalidStateError('Action has already been ran')
+            raise InvalidFutureError('Action has already been ran')
 
         try:
-            with kiwipy.capture_exceptions(self):
+            with capture_exceptions(self):
                 self.set_result(self._action(*args, **kwargs))
         finally:
             self._action = None  # type: ignore
@@ -67,41 +78,4 @@ def create_task(coro: Callable[[], Awaitable[Any]], loop: Optional[asyncio.Abstr
     """
     loop = loop or asyncio.get_event_loop()
 
-    future = loop.create_future()
-
-    async def run_task() -> None:
-        with kiwipy.capture_exceptions(future):
-            res = await coro()
-            future.set_result(res)
-
-    asyncio.run_coroutine_threadsafe(run_task(), loop)
-    return future
-
-
-def unwrap_kiwi_future(future: kiwipy.Future) -> kiwipy.Future:
-    """
-    Create a kiwi future that represents the final results of a nested series of futures,
-    meaning that if the futures provided itself resolves to a future the returned
-    future will not resolve to a value until the final chain of futures is not a future
-    but a concrete value.  If at any point in the chain a future resolves to an exception
-    then the returned future will also resolve to that exception.
-
-    :param future: the future to unwrap
-    :return: the unwrapping future
-
-    """
-    unwrapping = kiwipy.Future()
-
-    def unwrap(fut: kiwipy.Future) -> None:
-        if fut.cancelled():
-            unwrapping.cancel()
-        else:
-            with kiwipy.capture_exceptions(unwrapping):
-                result = fut.result()
-                if isinstance(result, kiwipy.Future):
-                    result.add_done_callback(unwrap)
-                else:
-                    unwrapping.set_result(result)
-
-    future.add_done_callback(unwrap)
-    return unwrapping
+    return asyncio.wrap_future(asyncio.run_coroutine_threadsafe(coro(), loop))