Russian Lang

CA Auto Update/autoupdateapps.txt

@@ -0,0 +1,19 @@
+Docker Auto Update Settings=Настройки автоматического обновления Docker-ов
+Plugin Auto Update Settings=Настройки автоматического обновления плагинов
+Autoupdate ON=Автообновление включено
+Autoupdate OFF=Автообновление выключено
+Send Notifications On Update=Отправлять уведомления об обновлении
+Delay in days before updating applications=Задержка в днях до обновления приложений
+Auto Update All Plugins=Автоматическое обновление всех плагинов
+Update Check Frequency=Частота проверки обновлений
+Support=Служба поддержки
+Day Of Week=День недели
+Day Of Month=День месяца
+Hour=Часа
+Minute=Минуты
+Custom cron expression=Пользовательское выражение cron
+Credits=Авторы
+Docker Must Be Enabled For This Module To Operate=
+Time to wait for graceful stop before killing=Время ожидания корректной остановки перез принудительным завершением
+Update All Docker Applications=
+Do not overlap with autoupdate=Не пересекаться с автообновлениями

CA Config File Edit/configedit.txt

@@ -0,0 +1,12 @@
+Select File=Выберите файл
+Error reading file=Ошибка чтения файла
+No Backup File Found=Файл резервной копии не найден
+Select a file to edit=Выберите файл для редактирования
+note editing a binary file could have unintended consequences=обратите внимание, что редактирование двоичного файла может иметь непредвиденные последствия
+No file selected=Файл не выбран
+Backup File=Файл резервной копии
+Editing=Редактирование
+Generally, it is not recommended to change the format=Как правило, менять формат не рекомендуется.
+Credits=Авторы
+No Backup File Found=Файл резервной копии не найден
+File Format=Формат файла

Community Apps/ca_settings.txt

@@ -1,14 +1,20 @@
-Hide Deprecated Applications=
-This setting hides deprecated applications from the list of available apps Deprecated apps will still however display within the installed and previous apps sections=
-Hide Incompatible Applications=
-This setting will hide applications that are listed as being incompatible with your version of Unraid=
-Enable Reinstall Default=
-This option enables another button on the cards and popups which will allow you to reinstall an installed application using its default template values This option can be confusing at times, and is only generally used if you wish to install and have an application running twice simultaneously=
-Enable additional search results from dockerHub=
-This setting enables CA to retrieve additional search results from dockerHub Note that docker must be enabled for this to be operational=
-Allow CA to send any emergency notifications=
-This setting allows CA to periodically scan your system and alert you to the presence of=
-1 Known malware and security vulnerabilities within applications=
-2 Critical security vulnerabilities within Unraid OS=
-3 Any installed applications which may seriously hinder the operation of your server=
-Support Thread=
+Hide Deprecated Applications=Скрыть устаревшие приложения
+This setting hides deprecated applications from the list of available apps Deprecated apps will still however display within the installed and previous apps sections=Этот параметр скрывает устаревшие приложения из списка доступных приложений. Устаревшие приложения по-прежнему будут отображаться в разделах установленных и предыдущих приложений.
+Hide Incompatible Applications=Скрыть несовместимые приложения
+This setting will hide applications that are listed as being incompatible with your version of Unraid=Этот параметр скроет приложения, которые указаны как несовместимые с вашей версией Unraid.
+Allow install of second instance=Разрешить установку второго экземпляра
+This option enables another button on the cards and popups which will allow you to reinstall an installed application using its default template values This option can be confusing at times, and is only generally used if you wish to install and have an application running twice simultaneously=Этот параметр включает еще одну кнопку на карточках и всплывающих окнах, которые позволят вам переустановить установленное приложение, используя его значения шаблона по умолчанию. Этот параметр может время от времени сбивать с толку и обычно используется только в том случае, если вы хотите установить и запустить приложение дважды одновременно.
+Show descriptions on application cards=Показывать описания на карточках приложений
+This option dictates whether the descriptions appear on the cards or not=Этот параметр определяет, будут ли описания отображаться на карточках или нет.
+Allow CA to check for updates to applications=Разрешить ПС проверять наличие обновлений для приложений
+This setting enables CA to check for updates to applications Note that Community Applications will always check for updates to itself=Этот параметр позволяет ПС проверять наличие обновлений для приложений. Обратите внимание, что приложения сообщества всегда будут проверять наличие обновлений для себя.
+Allow CA to send any emergency notifications=Разрешить ПС отправлять любые экстренные уведомления
+This setting allows CA to periodically scan your system and alert you to the presence of=Этот параметр позволяет ПС периодически сканировать вашу систему и предупреждать вас о наличии
+1 Known malware and security vulnerabilities within applications=1 Известных вредоносных программ и уязвимостей безопасности в приложениях
+2 Critical security vulnerabilities within Unraid OS=2 Критических уязвимостях в системе безопасности Unraid OS
+3 Any installed applications which may seriously hinder the operation of your server=3 Любых установленных приложениях, которые могут серьезно помешать работе вашего сервера.
+Save CA debugging information=Сохранить отладочную информацию ПС
+Only enable this when advised to from the author of Community Applications=Включайте это только по рекомендации автора приложений сообщества.
+Enable developer mode=Включить режим разработчика
+This unlocks some extra features within CA generally only used by developers Not recommended to enable=Это разблокирует некоторые дополнительные функции в ПС, которые обычно используются только разработчиками. Не рекомендуется включать
+Support Thread=Тема на форуме

Community Apps/javascript.ca.txt

@@ -1,14 +1,14 @@
-Search for %s=
+Search for %s=Поиск %s
 DockerHub Search for %s=
-Are you sure you want to delete %s from the list of previously installed applications=
-Are you sure you want to uninstall %s=
-Are you sure you want to remove the private application %s by %s=
-Removing %s=
-Uninstalling %s=
-Install %s Selected Application=
-Install %s Selected Applications=
+Are you sure you want to delete %s from the list of previously installed applications=Вы уверены, что хотите удалить %s из списка ранее установленных приложений
+Are you sure you want to uninstall %s=Вы уверены, что хотите удалить %s
+Are you sure you want to remove the private application %s by %s=Вы действительно хотите удалить частное приложение %s от %s
+Removing %s=Удаление %s
+Uninstalling %s=Удаление %s
+Install %s Selected Application=Установить %s выбранное приложение
+Install %s Selected Applications=Установить %s выбранных приложений
 Are you sure you want to install %s docker and %s plugin applications=
-Install Application=
-Install Applications=
+Install Application=Установить приложение
+Install Applications=Установить приложения
 Something really wrong went on during %s=
-Are you sure you want to delete %s applications from the previously installed list=
+Are you sure you want to delete %s applications from the previously installed list=Вы действительно хотите удалить %s приложений из ранее установленного списка

Disable Security Mitigations/disablesecurity.txt

@@ -0,0 +1,11 @@
+Disabling Spectre, Meltdown and Zombieload MDS mitigations may improve your CPU speed But these are security risks for certain workloads, and disabling the mitigations is purely all at your own risk=
+Mitigations currently disabled=
+Mitigations currently enabled=
+Status=
+will be updated after rebooting the server=
+Enable Mitigations=
+Disable Mitigations=
+Disable Security Mitigations A Reboot Is Required For Changes To Take Effect=
+A Reboot Is Required For Changes To Take Effect=
+Mitigations will be enabled after a reboot=
+Mitigations will be disabled after a reboot=

Dynamix Active Streams/activestreams.txt

@@ -0,0 +1,17 @@
+Halt=
+Host Address=Адрес хоста
+Host=Хост
+No active streams=Нет активных потоков
+Playtime=
+Stop stream=Остановить трансляцию
+Stream=Транслировать
+User Name=Имя пользователя
+User=Пользователь
+
+:streams_plug:
+> Give symbolic names to IP addresses, which are displayed on the active streams page.
+>
+> New IP addresses are automatically added to the list when detected.
+>
+> To remove a name association, clear the respective user name box and press apply.
+:end

Dynamix Auto Fan/fansettings.txt

@@ -0,0 +1,10 @@
+Click DETECT=Нажмите ОБНАРУЖИТЬ
+Detect=Обнаружить
+Exclude drives=Исключить диски
+Fan control function=Функция управления вентилятором
+High temperature threshold=Порог высокой температуры
+Low temperature threshold=Порог низкой температуры
+Minimum PWM value=Минимальное значение ШИМ
+PWM controller=ШИМ-контроллер
+PWM fan=ШИМ вентилятор
+Refresh interval=Интервал обновления

Dynamix Cache Dirs/folderchacingsettings.txt

@@ -0,0 +1,142 @@
+Adaptive=
+Cache pressure of directories on system=
+Check HELP for filter example=
+Disk Idle Timer=
+Excluded folders=Исключённые папки
+Folder caching function=Функция кэширования папок
+for adaptive depth=для адаптивной глубины
+Important - check HELP if disks spin up=
+Included folders=Включённые папки
+Limit the memory available to the shell in which the script runs increase if it dies=Limit the memory available to the shell in which the script runs (increase if it dies)
+Logging=Ведение журнала
+Maximum interval between folder scans=Максимальный интервал между сканированием папок
+Maximum level depth=Максимальная глубина уровня
+Minimum interval between folder scans=Минимальный интервал между сканированием папок
+Minimum level depth=Минимальная глубина уровня
+or see=
+Run scan of each disk in a separate thread=
+Scan timeout for a scan during disk-idle period=
+Scan timeout for a scan during initial startup or less-idle period=
+Scan timeout for a scan when all directories have been succesfully cached=
+Scan user shares mntuser=Scan user shares (/mnt/user)
+Suspend during Mover process=Suspend during 'Mover' process
+unlimited=
+Unraid forum=Форум Unraid
+Use Adaptive depth=
+User defined options=
+
+:cachedirs_info_plug:
+> Folder Caching Info
+>
+> The folder caching (cache_dirs) reads directories continously to keep them in memory.
+> The program does not know whether a directory is already in memory or need to be reread from disk.
+> Therefore it cannot avoid spinning up disks when it happens that the linux memory cache evicts a directory and cache_dirs rescans the directoy.
+> If a large number of files are being kept in memory then it seems inevitably that some diretories get evicted from the cache when the system is under load.
+>
+> The program by default uses an adaptive mode where it reduces the depth of the directory structure which it tries to keep in memory.
+> When it detects a cache-miss (slow scan time) it will reduce the depth until disks are idle again,
+> but will still be at risk of putting load on the disks for a minute or two until the program gives up and waits for idle disks.
+> The less files the cache needs to hold, the less likely it is that the program spins up disks.
+:end
+
+:cachedirs_function_plug:
+> Select whether folder caching is enabled or disabled. Caching will only effectively occur when the array is started.
+> The caching function is automatically restarted or stopped when the array goes online or offline.
+:end
+
+:cachedirs_pressure_plug:
+> Set cache_pressure to NN (default = 10). A value of 0 means never reclaim cache.
+>
+> A value of 1 works great for many users. If your disks spin up or cache_dirs logging indicates it frequently has accessed disks after scan, try lowering cache-pressure to 1. If the system runs out of memory increase cache-pressure.
+>
+> If CPU and disks is heavily affected by cache_dirs on frequent intervals this is also an indication that cache_dirs has to rescan everything.
+>
+> Warning: a value of 0 will cause kernel never to release the memory of directories, and if too little memory is available,
+> it will cause the system to crash. cache_dirs does not reset the cachePressure after quitting,
+> to reset the cache-pressure execute 'sudo sysctl vm.vfs_cache_pressure=100', or run cache-dirs with cache_pressure 100.
+>
+> See 'vfs_cache_pressure' in [kernel.org](https://www.kernel.org/doc/Documentation/sysctl/vm.txt).
+:end
+
+:cachedirs_suspend_plug:
+> Stop caching while the mover is running to avoid conflicts. When using adaptive depth it will probably work well NO.
+> With fixed depth it will almost certainly put less load on the disks to choose YES.
+:end
+
+:cachedirs_included_folders_plug:
+> The dropdown menu shows all available folders, by default all folders are included. Select here the restricted list of folders to be included.
+>
+> If an included folder is excluded, then the folder gets excluded. It is simplest to not use includes and excludes at the same time.
+:end
+
+:cachedirs_excluded_folders_plug:
+> The dropdown menu shows all available folders, by default no folders are excluded. Select here any folders to be excluded.
+>
+> It is possible to exclude an included folder. It is simplest to not use includes and excludes at the same time.
+:end
+
+:cachedirs_adaptive_depth_plug:
+> If adaptive is enabled the depth will be automatically adjusted but will never exceed max level depth.
+> It will start at depth 1 and keep increasing the scan depth towards maximum level as long as scans do not take too long to complete (see scan timeout).
+> If adaptive is disabled then cache_dirs will always scan to the max level.
+:end
+
+:cachedirs_min_level_plug:
+> Sets the minimum folder level for the adaptive scan (user-share > child folder > grand child is two levels). Default is 4.
+:end
+
+:cachedirs_max_level_plug:
+> Sets the maximum folder levels for the scan (parent > child folder > grand child). Set to 'unlimited' (or 0) to remove maximum
+:end
+
+:cachedirs_idle_timer_plug:
+> When the disks have been idle this long, cache_dirs adaptive scan starts working towards building the cache.
+:end
+
+:cachedirs_timeout_scan_plug:
+> Scan timeout is the maximum duration that a single scan through all directories at the current level af depth (which may change adaptively).
+> Increase it if cache_dirs fails in caching all your files. This timeout is always used if adaptive is disabled.
+:end
+
+:cachedirs_timeout_initial_plug:
+> Increase it if you want cache_dirs too give more time in initial scan, and when filesystem may be busy.
+:end
+
+:cachedirs_timeout_cached_plug:
+> Decrease it if you want cache_dirs to put less load on system when cache is evicted from memory, and disks are not idle.
+> Increase if you want cache_dirs to have a greater chance af getting directories back into memory.
+:end
+
+:cachedirs_min_interval_plug:
+> Tweaking of the caching interval can be done for slower systems. Default value is 1 second, should be alright for most systems.
+:end
+
+:cachedirs_max_interval_plug:
+> Tweaking of the caching interval can be done for slower systems. Default value is 10 seconds, should be alright for most systems.
+:end
+
+:cachedirs_scan_disk_plug:
+> Each disk will be scanned in a separate thread, so the disks will be read concurrently. If user share is also scanned the user
+> share will be scanned in a single thread after all disks scans are completed, to avoid thrashing disks.
+:end
+
+:cachedirs_limit_memory_plug:
+> set ulimit to NN to limit memory used by script (default=50000), '-U 0' sets no ulimit at all and inherits the shells default).
+:end
+
+:cachedirs_logging_plug:
+> Select whether logging is enabled or disabled. Logging will be made to /var/log/cache_dirs.log and /var/log/cache_dirs_lost_cache.csv.
+> Be wary that the cache_dirs logs are placed in memory on unRAID and are not automatically rolled.
+:end
+
+:cachedirs_user_defined_plug:
+> The cache_dirs script has additional options which may be used.
+> Refer to the online documentation to use these as needed,
+> or see the cache_dirs script itself located under /usr/local/emhttp/plugins/dynamix.cache.dirs/scripts/cache_dirs
+>
+> Its possible to tell cache_dirs to avoid traversing all directories with a certain name. The following example avoids '.Recycle.Bin' and 'temp' and 'log' folders: 
+>
+> <span class="strong orange-text">-a '-noleaf -name .Recycle.Bin -prune -o -name log -prune -o -name temp -prune -o -print'</span>
+>
+> Note that the single quotes around argument to -a is important. Double-quotes do not work in the current version, so unfortunately its not currently possible to filter with '-name "*Old" -prune'.
+:end