Printer mods for Voron 3D printers Remember to update this README when uploading new mod!
Mods for legacy printers can be found here. If one of your mods applies to a current generation Voron printer, contact the admins in Discord to have your mod moved to this folder.
Update the following table with the information about your mod:
- Your name
- A link to your sub-folder
- A short description of your mod
- The printer compatibility. Use
:heavy_check_mark:for ✔️,:x:for ❌ and:grey_question:for ❔
like so:
| Creator | [Mod title](link) | Description | :x: | :x: | :x: |
| Creator | Mod title | Description | V0 | V1.8 | V2.4 |
|---|---|---|---|---|---|
| aeresov | TL filament sensor bracket | A bracket for TL filament sensor to mount near stock spool holder. | ❌ | ❔ | ✔️ |
| arkeet | Dial test indicator mount | A toolhead mount for a dial test indicator, where the tip is located at the nozzle. | ❌ | ✔️ | ✔️ |
| Badnoob | Precision AB Drive | Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame. | ❔ | ❔ | ✔️ |
| Rail Alignment | Tools and procedure to properly align the rails in 2.4 and Afterburner | ❌ | ❌ | ✔️ | |
| d3nny | Filtered Power Plug with RND_165-00057 | Filtered Power Plug for RND 165-00057 and CAT6-Plug | ❌ | ❌ | ✔️ |
| Dan88 | V0 one-part Skirts | One part Skirts for the V0 | ✔️ | ❌ | ❌ |
| DorjeDorf | Duet 3 6HC Din Bracket | V2.4 Duet 3 6HC Din Bracket | ❌ | ❌ | ✔️ |
| Duet 3 3HC Din Bracket | V2.4 Duet 3 3HC Din Bracket | ❌ | ❌ | ✔️ | |
| DrGhetto | Ghetto Panels | Printed panels for the Voron Zero | ✔️ | ❌ | ❌ |
| eddie | V1.8 12mm Z Mod | Add V1.8 option for 12mm Z rods | ❌ | ✔️ | ❌ |
| edwardyeeks | Decontaminator Purge Bucket | Removeable purge bucket | ❌ | ❌ | ✔️ |
| V2.4 Z Drive Motor Tensioner Mod | Braced motor tensioner for z drive | ❌ | ❌ | ✔️ | |
| Ellis | 15x15 Drag Chain Ends | 15x15 drag chain end pieces | ❔ | ❔ | ✔️ |
| Badge Retractor Mount | Extrusion mount for badge retractor to keep bowden tube out of the way. | ❔ | ❔ | ✔️ | |
| Short Z Joints | Shorter Z joints for the v2.4 | ❌ | ❌ | ✔️ | |
| FreeformFez | V1.8 Filtered Power Inlet | V1.6 Filtered Inlet and Rocker Switch for V1.8 | ❌ | ✔️ | ❌ |
| GSL12 | Pocketwatch Nema 17 | Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe for V0 fork with 2020 extrusions, Nema17 and MGN9 or other printers. | ❔ | ❔ | ❔ |
| hijax_pl_ | Corner panel clip | V2 panel corner frames using 3-way L brackets in the corners | ❌ | ❌ | ✔️ |
| Din Rail mount | Adapter to attach DIN Rail to 2020 extrusion. | ❌ | ❌ | ✔️ | |
| Controler Board adapters | DIN (rotated) and legacy adapters for boards like SKR mini E3. | ❔ | ❌ | ✔️ | |
| jasonc | V2.4 Z-Idler Shoulder Bolt Mod | Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers. | ❌ | ❌ | ✔️ |
| Kruppes | V0 Printed Deck with inserts | Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. | ✔️ | ❌ | ❌ |
| madros | V0 OLED-skirt | V0 skirt with 0.96" OLED | ✔️ | ❌ | ❌ |
| MarcPot | UHP PSU Bracket Clip | DIN rail mount for the Mean Well UHP series PSU. | ❔ | ❔ | ✔️ |
| Hour Counter Skirt + Keystone Skirt | Skirt mod for a mechanical hour counter and keystone inserts | ❌ | ❌ | ✔️ | |
| mjoaris | 10x11 Cable Chain Endcaps | Printable Endcaps for 10x11 Cable Chains | ❌ | ✔️ | ✔️ |
| Mini12864 LCD Mount | Swiveling case for the Fysetc Mini12864 LCD | ❌ | ❔ | ✔️ | |
| Mosher | Door hinges with M3 screws shafts | Simple mod of print in place door hinges, which uses m3 screws as shafts. | ❌ | ❌ | ✔️ |
| natewalck | V1.8 Jigs | Jigs for assembling V1.8 | ❌ | ✔️ | ❌ |
| Nomsplease | 60mm Shaft Jig | Simple jig for cutting and grinding 60mm Z shafts | ❌ | ❌ | ✔️ |
| Duet Wifi Mount | Duet wifi mount in pocketwatch location | ✔️ | ❌ | ❌ | |
| LED Mounts | Basic LED mounts for 10 and 12mm strips | ✔️ | ❌ | ❌ | |
| Remixed Panel Mounts | Remixed rear bottom panel mounts with stop | ✔️ | ❌ | ❌ | |
| Pi Cam/ZeroW Mount | Mount for pi camera and ZeroW | ✔️ | ❌ | ❌ | |
| Pocket Watch Rear Reolcation Bracket | Pocket watch rear reolcation bracket | ✔️ | ❌ | ❌ | |
| randell | Microswitch Pod for PCB | Modified endstop pod for use of endstop switches mounted on a PCB | ❌ | ❌ | ✔️ |
| raymondh | Large Spool Holders | Larger spool holders for KVP spools | ❌ | ✔️ | ✔️ |
| StvPtrsn | Skirts for a 320mm Build | Skirts for a 320mm build | ❌ | ❌ | ✔️ |
| Keystone Jack for Filtered Mains Panel | Add a keystone jack to your filtered mains plug panel | ❌ | ❌ | ✔️ | |
| Side Fan Support, No Tape | Mount the 60mm side fans and inserts without tape | ❌ | ❌ | ✔️ | |
| tameike | Din Rail SKR 90 deg | SKR V1.3 bracket turned 90 degrees | ❌ | ❔ | ✔️ |
| Din Rail 2020 Holder | Attaching DIN Rails to 2020 | ❌ | ❔ | ✔️ | |
| TacoRaven Mounting Frame | TR V0 mount | ✔️ | ❌ | ❌ | |
| Jetpack V0 base | Attach Jetpack to V0 frame | ✔️ | ❌ | ❌ | |
| warriorofwire | Slenderfan for Afterburner | Lighter, quieter, smaller Afterburner | ❌ | ❌ | ✔️ |
| xbst_ | PCB LED Holder | Very simple mount for some (?) PCB LED Bars | ❌ | ✔️ | ✔️ |
| DIN Mount Omron Relay | A simple DIN rail mount for the BOM Relay | ❌ | ✔️ | ✔️ | |
| DIN Mount Pi 4x Relay Board | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | ❌ | ✔️ | ✔️ | |
| DIN Mount Max31865 | A simple DIN rail mount for the Adafruit (or SAME SIZE clone) MAX31865 PT100 Board. | ❌ | ✔️ | ✔️ | |
| Car Hood Style Bed Hinge | A way of reaching electronics from the top by having a "car hood" style hing for the heatbed, and rotated electronics mounts. | ❌ | ❌ | ✔️ |