Mk2 Expansion 1.7

KSP 1.1 update

Mk2Expansion/Changelog.txt → Mk2Expansion 1.7/Changelog.txt

@@ -1,11 +1,39 @@
+Version 1.7.03
+===========================================
+1.1 update
+-New example crafts
+-All parts now have uniform M2X prefix - this will probaly break saved/inflight crafts
+-Model Rework: ESTOC now has bottom attach node, fairing, rocket mode heat FX
+-Model Rework: Linear Aerospike now has bottom attach node, fairing
+-Model Rework: Ion Engine now has fairing, bottom node
+-Model Rework: R-71 cockpit has been lengthened, given minor cosmetic tweaks; may break saved craft
+-Model Rework; P-G0 radial VTOL engine has been completely remade
+-Model Rework: J. Edgars have been combined into one part; this might break saved/in-flight craft
+-Model Rework: shockcone, now has thermal animation
+-Model Rework: RCS blister model reworked, now has multiple variants
+-Model Rework: Shrouded solar panel completely reworked
+-New Part: OMS Blister - more powerful LF/O version of the Configurable RCS blister
+-New Part: Mk2 subsonic intake
+_New Part: Banshee Lift Fan radial variant
+-Model retexture: mk2 Precooler
+-New FX; AARE and AASRBs now have custom FX
+-Fixed Air-Augmented engines mode switch dual activation issue
+-Mk2Science Lab IVA tweaked
+-Afterburn Ramjet thrust curve tweaked to provide more power at low mach
+-CB-C cockpit LiquidFuel tank removed
+-Science Lab science/data yields rebalanced
+-Alternate 4 seat science lab IVA config added
+-all parts now have search tags
+-part Depreciation: Mk2 inline Drill, Mk2 ISRU refienry, Mk2 Generator, Mk2 Ore Tank; parts have been spun off into Stockalike Mining Extension; this might break saved/in-flight craft
+
 Version 1.7.01 prerelease
 ================================
 new part: mk2 inline drill, for real this time
 New part: mk2 ISRu refinery, ditto
 AASRBs now have increased intakeAtm storage and intakes now have mach curves buffing their intake ability at low speed
 tweaked AASRB intakeAtm consumption, should be a bit easier to use
 tweaked AASRB thrust down slightly to improve burn time
-tweaked Sledgehammer AARE, shouldfunction properly now switching engine modes
+tweaked Sledgehammer AARE, should function properly now switching engine modes
 Air Augmented engines now have max thrust/ISP listed in their part descriptions
 Tweaked Banshee, now uses FanIntakeAir to prevent Banshee from acting as a 2m intake for any other jets on the craft
 Vector turbojet alternator now functions during afterburner operation
@@ -39,11 +67,6 @@ Version 1.7 prerelease
 -Model retextures: changed model textures on some models to remove depeciated SQUAD texture references 
 -J. Edgar fuselage VTOL engine now uses the BDAnimation module rather than AnimateGeneric
 
-=rework model for ISRU refinery
-=add custom FX for all airaugmented engines
-==auto detach when empty for AASRBs?
-=shrouded deployable radiator
-
 Version 1.6.10
 ==============================
 -KSP 1.05 update

Mk2Expansion/GameData/InterstellarFuelSwitch/Plugins/InterstellarFuelSwitch.version → Mk2Expansion 1.7/GameData/InterstellarFuelSwitch/Plugins/InterstellarFuelSwitch.version

@@ -5,14 +5,14 @@
     "VERSION":
     {
         "MAJOR":1,
-        "MINOR":18,
+        "MINOR":19,
         "PATCH":0,
         "BUILD":0
     },
     "KSP_VERSION":
     {
         "MAJOR":1,
-        "MINOR":0,
-        "PATCH":5
+        "MINOR":1,
+        "PATCH":0
     }
 }

Mk2Expansion/GameData/Mk2Expansion/Parts/Aero/AdapterIntake/part.cfg → Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/AdapterIntake/part.cfg

@@ -5,7 +5,7 @@ PART
 // 
 
 // --- general parameters ---
-name = mk2_InlineIntake
+name = M2X_InlineIntake
 module = Part
 author = SuicidalInsanity
 
@@ -47,6 +47,7 @@ attachRules = 1,0,1,1,0
 	maxTemp = 2000 // = 3400
 	fuelCrossFeed = True
 	bulkheadProfiles = size1, mk2 
+	tags = mk2 m2x aero (air breathe fligh inlet jet oxygen plane suck supersonic cone
 
 MODULE
 	{

Mk2Expansion/GameData/Mk2Expansion/Parts/Aero/AeroIntake/part.cfg → Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/AeroIntake/part.cfg

@@ -5,7 +5,7 @@ PART
 // 
 
 // --- general parameters ---
-name = mk2_AeroIntake
+name = M2X_AeroIntake
 module = Part
 author = SuicidalInsanity
 
@@ -36,15 +36,16 @@ attachRules = 1,0,1,1,0
 mass = 0.45
 thermalMassModifier = 6.0 
 	// heatConductivity = 0.06 // half default
-	emissiveConstant = 0.7
+	heatConvectiveConstant = 0.75 // air goes into jet, not bashes on intake.
+	emissiveConstant = 0.95
 	dragModelType = default
 	maximum_drag = 0.3
 	minimum_drag = 0.3
 	angularDrag = 1
 	crashTolerance = 12
 	maxTemp = 2400 // = 3400
 	fuelCrossFeed = True
-	bulkheadProfiles = mk2 
+	tags = mk2 m2x aero (air breathe fligh inlet jet oxygen plane subsonic supersonic suck 
 
 	MODULE
 	{

Mk2Expansion/GameData/Mk2Expansion/Parts/Aero/Chines/End.cfg → Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/Chines/End.cfg

@@ -1,6 +1,6 @@
 PART
 {
-	name = ChineCap
+	name = M2X_ChineCap
 	module = Part
 	author = SuicidalInsanity
 	rescaleFactor = 1
@@ -27,6 +27,7 @@ PART
 	maxTemp = 2400 // = 3400
 	fuelCrossFeed = True
 	bulkheadProfiles = srf
+	tags = mk2 m2x aero (fligh plane supersonic chine
 	MODEL
 	{
 		model = Mk2Expansion/Parts/Aero/Chines/End

Mk2Expansion/GameData/Mk2Expansion/Parts/Aero/Chines/Long.cfg → Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/Chines/Long.cfg

@@ -1,6 +1,6 @@
 PART
 {
-	name = ChineLong
+	name = M2X_ChineLong
 	module = Part
 	author = SuicidalInsanity
 	rescaleFactor = 1
@@ -29,6 +29,7 @@ PART
 	explosionPotential = 0.1
 	fuelCrossFeed = True
 	bulkheadProfiles = srf
+	tags = mk2 m2x aero (fligh plane supersonic chine
 	MODEL
 	{
 		model = Mk2Expansion/Parts/Aero/Chines/Long

Mk2Expansion/GameData/Mk2Expansion/Parts/Aero/Chines/RLong.cfg → Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/Chines/RLong.cfg

@@ -1,6 +1,6 @@
 PART
 {
-	name = RootChineLong
+	name = M2X_RootChineLong
 	module = Part
 	author = SuicidalInsanity
 	rescaleFactor = 1
@@ -29,6 +29,7 @@ PART
 	explosionPotential = 0.1
 	fuelCrossFeed = True
 	bulkheadProfiles = srf
+	tags = mk2 m2x aero (fligh plane supersonic chine wing root
 	MODEL
 	{
 		model = Mk2Expansion/Parts/Aero/Chines/Rootlong

Mk2Expansion/GameData/Mk2Expansion/Parts/Aero/Chines/RShort.cfg → Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/Chines/RShort.cfg

@@ -1,6 +1,6 @@
 PART
 {
-	name = RootChineShort
+	name = M2X_RootChineShort
 	module = Part
 	author = SuicidalInsanity
 	rescaleFactor = 1
@@ -28,7 +28,7 @@ PART
 	maxTemp = 2400 // = 3400
 	explosionPotential = 0.1
 	fuelCrossFeed = True
-	bulkheadProfiles = srf
+	tags = mk2 m2x aero (fligh plane supersonic chine wing root
 	MODEL
 	{
 		model = Mk2Expansion/Parts/Aero/Chines/Rootshort

Mk2Expansion/GameData/Mk2Expansion/Parts/Aero/Chines/Radapter.cfg → Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/Chines/Radapter.cfg

@@ -1,6 +1,6 @@
 PART
 {
-	name = RootChineAdapter
+	name = M2X_RootChineAdapter
 	module = Part
 	author = SuicidalInsanity
 	rescaleFactor = 1
@@ -29,6 +29,7 @@ PART
 	explosionPotential = 0.1
 	fuelCrossFeed = True
 	bulkheadProfiles = srf
+	tags = mk2 m2x aero (fligh plane supersonic chine wing root
 	MODEL
 	{
 		model = Mk2Expansion/Parts/Aero/Chines/Rootcap

Mk2Expansion/GameData/Mk2Expansion/Parts/Aero/Chines/Short.cfg → Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/Chines/Short.cfg

@@ -1,6 +1,6 @@
 PART
 {
-	name = ChineShort
+	name = M2X_ChineShort
 	module = Part
 	author = SuicidalInsanity
 	rescaleFactor = 1
@@ -29,6 +29,7 @@ PART
 	explosionPotential = 0.1
 	fuelCrossFeed = True
 	bulkheadProfiles = srf
+	tags = mk2 m2x aero (fligh plane supersonic chine
 	MODEL
 	{
 		model = Mk2Expansion/Parts/Aero/Chines/Short

Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/CircularIntake/part.cfg

@@ -0,0 +1,68 @@
+PART
+{
+// --- general parameters ---
+name = M2X_circularintake
+module = Part
+author = SuicidalInsanity
+
+// --- asset parameters ---
+	MODEL
+	{
+		model = Mk2Expansion/Parts/Aero/CircularIntake/Model
+		texture = mk2adapters1m, Squad/Parts/FuelTank/mk2Adapters/mk2adapters1m
+		texture = CircluarIntakes, Squad/Parts/Aero/circularIntake/CircluarIntakes
+	}
+// --- node definitions ---
+node_stack_bottom = 0.0, -0.2475652, 0.0, 0.0, -1.0, 0.0
+node_attach = 0.0, 0.0, 0.7, 0.0, 0.0, -1.0, 1
+rescaleFactor = 1
+
+// --- editor parameters ---
+TechRequired = aerodynamicSystems
+entryCost = 10600
+cost = 1400
+category = Aero
+subcategory = 0
+title = Mk2 Twin Circular Intake
+manufacturer = Insanity Aerospace
+description = A Mk2 formfactor twinned turbofan intake, optimized for subsonic flight. 
+// attachment rules: stack, srfAttach, allowStack, allowSrfAttach, allowCollision
+attachRules = 1,0,1,1,0
+
+// --- standard part parameters ---
+mass = 0.11
+thermalMassModifier = 8.0
+	// heatConductivity = 0.06 // half default
+	emissiveConstant = 0.55
+	dragModelType = default
+	maximum_drag = 0.3
+	minimum_drag = 0.3
+	angularDrag = 1
+	crashTolerance = 7
+	maxTemp = 1900 // = 3400
+	fuelCrossFeed = True
+	bulkheadProfiles = mk2
+	tags = mk2 m2x aero (air breathe fligh inlet jet oxygen plane subsonic suck
+
+MODULE
+	{
+		name = ModuleResourceIntake
+		resourceName = IntakeAir
+		checkForOxygen = true
+		area = 0.012
+		intakeSpeed = 15
+		intakeTransformName = Intake
+		machCurve
+		{
+			key = 1 1 0 0
+			key = 1.5 0.9 -0.4312553 -0.4312553
+			key = 2.5 0.45 -0.5275364 -0.5275364
+			key = 3.5 0.1 0 0
+		}
+	}
+	RESOURCE
+	{
+		name = IntakeAir
+		amount = 4
+		maxAmount = 4
+	}}

Mk2Expansion/GameData/Mk2Expansion/Parts/Aero/EngineShroud/part.cfg → Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/EngineShroud/part.cfg

@@ -1,11 +1,11 @@
 PART
 {
-	name = mk2EngineShroud
+	name = M2X_EngineShroud
 	module = Part
 	author = SuicidalInsanity
 	rescaleFactor = 1
-	node_stack_top = 0.0, -0.7362227, 0.0, 0.0, 1.0, 0.0
-	node_stack_bottom = 0.0, -0.9375, 0.0, 0.0, -1.0, 0.0
+	node_stack_top = 0.0, -0.04564005, 0.0, 0.0, 1.0, 0.0
+	node_stack_bottom = 0.0, -0.3041286, 0.0, 0.0, -1.0, 0.0
 	node_attach = 0.0, 0.0, 0.7, 0.0, 0.0, -1.0, 1
 	TechRequired = supersonicFlight
 	entryCost = 10600
@@ -14,7 +14,7 @@ PART
 	subcategory = 0
 	title = Mk2 Engine Shroud
 	manufacturer = Insanity Aerospace
-	description = Mount engines (or other things) to your plane with style.
+	description = Structural aeroshroud for improving the aerodynamics of otherwise non-aerodynamic engines or docking ports. The docking port shroud also permits seamless precision alignment docking between two shroud equipped craft.
 	attachRules = 1,1,1,1,0
 	mass = 0.1
 	thermalMassModifier = 2.0
@@ -33,16 +33,27 @@ PART
 	emissiveConstant = 0.8
 	fuelCrossFeed = True
 	bulkheadProfiles = size1, srf, mk2
+	tags = mk2 m2x aero (air aircraft fligh plane supersonic shroud 
 	MODEL
 	{
 		model = Mk2Expansion/Parts/Aero/EngineShroud/Model
 		texture = mk2adapters1m, Squad/Parts/FuelTank/mk2Adapters/mk2adapters1m
+		texture = mk2FuselageShort, Squad/Parts/FuelTank/mk2FuselageShort/mk2FuselageShort
 	}
 	MODULE
+    {
+	  name = InterstellarMeshSwitch
+        moduleID = 0
+        objectDisplayNames = Engine Shroud; Clamp-O-Tron Shroud
+        objects = EngineShroud; DockingPortShroud
+        affectColliders = true    
+	}
+
+	MODULE
 	{
 		name = ModuleLiftingSurface
 		useInternalDragModel = False
-		deflectionLiftCoeff = 0.28
+		deflectionLiftCoeff = 0.15
 		dragAtMaxAoA = 0.2
 		dragAtMinAoA = 0.1
 	}

Mk2Expansion/GameData/Mk2Expansion/Parts/Aero/MantaIntake/part.cfg → Mk2Expansion 1.7/GameData/Mk2Expansion/Parts/Aero/MantaIntake/part.cfg

@@ -5,7 +5,7 @@ PART
 // 
 
 // --- general parameters ---
-name = mk2_MantaIntake
+name = M2X_MantaIntake
 module = Part
 author = SuicidalInsanity
 
@@ -26,26 +26,25 @@ entryCost = 16500
 cost = 3055
 category = Aero
 subcategory = 0
-title = Mk2 "Manta" Ram Air Intake
+title = Mk2 Ram Air Intake
 manufacturer = Insanity Aerospace
 description = Following the success of the Ram Air Intake, the C7 complaints department became flooded with aerospace enthusiasts numerous and vocal protests at the lack of a supersonic air intake in the Mk2 form factor. Insanity Aerospace engineers took initiative, and, sparing no expense, created what was affectionately dubbed the 'Manta'.
 // attachment rules: stack, srfAttach, allowStack, allowSrfAttach, allowCollision
 attachRules = 1,0,1,1,0
-
+	stackSymmetry = 2
 // --- standard part parameters ---
 mass = 0.15
-thermalMassModifier = 6.0 // the dang things are light, so 3200 kJ/tonne-K
-	// heatConductivity = 0.06 // half default
+thermalMassModifier = 8.0 
+// heatConductivity = 0.06 // half default
 	emissiveConstant = 0.7
 	dragModelType = default
 	maximum_drag = 0.3
 	minimum_drag = 0.3
 	angularDrag = 1
 	crashTolerance = 12
-	maxTemp = 2100 // = 3400
+	maxTemp = 2400 // = 3400
 	fuelCrossFeed = True
-	bulkheadProfiles = mk2 
-
+	tags = mk2 m2x aero (air aircraft breathe fligh inlet jet oxygen plane suck supersonic
 MODULE
 	{
 		name = ModuleResourceIntake