Remove .check_parameters() method from signatures.

amaranth_soc/csr/bus.py

@@ -49,13 +49,17 @@ class Signature(wiring.Signature):
         w_stb : Signal()
             Write strobe. Registers should update their value or perform the write side effect when
             this strobe is asserted.
-
-        Raises
-        ------
-        See :meth:`Element.Signature.check_parameters`.
         """
         def __init__(self, width, access):
-            self.check_parameters(width, access)
+            if not isinstance(width, int) or width < 0:
+                raise TypeError(f"Width must be a non-negative integer, not {width!r}")
+            # TODO(py3.9): Remove this. Python 3.8 and below use cls.__name__ in the error message
+            # instead of cls.__qualname__.
+            # Element.Access(access)
+            try:
+                Element.Access(access)
+            except ValueError as e:
+                raise ValueError(f"{access!r} is not a valid Element.Access") from e
 
             self._width  = width
             self._access = Element.Access(access)
@@ -81,27 +85,6 @@ def width(self):
         def access(self):
             return self._access
 
-        @classmethod
-        def check_parameters(cls, width, access):
-            """Validate signature parameters.
-
-            Raises
-            ------
-            :exc:`TypeError`
-                If ``width`` is not an integer greater than or equal to 0.
-            :exc:`ValueError`
-                If ``access`` is not a member of :class:`Element.Access`.
-            """
-            if not isinstance(width, int) or width < 0:
-                raise TypeError(f"Width must be a non-negative integer, not {width!r}")
-            # TODO(py3.9): Remove this. Python 3.8 and below use cls.__name__ in the error message
-            # instead of cls.__qualname__.
-            # Element.Access(access)
-            try:
-                Element.Access(access)
-            except ValueError as e:
-                raise ValueError(f"{access!r} is not a valid Element.Access") from e
-
         def create(self, *, path=None, src_loc_at=0):
             """Create a compatible interface.
 
@@ -139,10 +122,6 @@ def __repr__(self):
         Register access mode.
     path : iter(:class:`str`)
         Path to this CSR interface. Optional. See :class:`wiring.PureInterface`.
-
-    Raises
-    ------
-    See :meth:`Element.Signature.check_parameters`
     """
     def __init__(self, width, access, *, path=None, src_loc_at=0):
         super().__init__(Element.Signature(width=width, access=access), path=path, src_loc_at=1 + src_loc_at)
@@ -188,13 +167,12 @@ class Signature(wiring.Signature):
         to the register and causes write side effects to be performed (if any). If ``addr`` points
         to any chunk of a register, latches ``w_data`` to the captured value. Otherwise, does
         nothing.
-
-    Raises
-    ------
-    See :meth:`Signature.check_parameters`.
     """
     def __init__(self, *, addr_width, data_width):
-        self.check_parameters(addr_width=addr_width, data_width=data_width)
+        if not isinstance(addr_width, int) or addr_width <= 0:
+            raise TypeError(f"Address width must be a positive integer, not {addr_width!r}")
+        if not isinstance(data_width, int) or data_width <= 0:
+            raise TypeError(f"Data width must be a positive integer, not {data_width!r}")
 
         self._addr_width = addr_width
         self._data_width = data_width
@@ -216,22 +194,6 @@ def addr_width(self):
     def data_width(self):
         return self._data_width
 
-    @classmethod
-    def check_parameters(cls, *, addr_width, data_width):
-        """Validate signature parameters.
-
-        Raises
-        ------
-        :exc:`TypeError`
-            If ``addr_width`` is not an integer greater than 0.
-        :exc:`TypeError`
-            If ``data_width`` is not an integer greater than 0.
-        """
-        if not isinstance(addr_width, int) or addr_width <= 0:
-            raise TypeError(f"Address width must be a positive integer, not {addr_width!r}")
-        if not isinstance(data_width, int) or data_width <= 0:
-            raise TypeError(f"Data width must be a positive integer, not {data_width!r}")
-
     def create(self, *, path=None, src_loc_at=0):
         """Create a compatible interface.
 
@@ -288,14 +250,10 @@ class Interface(wiring.PureInterface):
     ----------
     memory_map: :class:`MemoryMap`
         Memory map of the bus. Optional.
-
-    Raises
-    ------
-    See :meth:`Signature.check_parameters`.
     """
     def __init__(self, *, addr_width, data_width, path=None, src_loc_at=0):
-        sig = Signature(addr_width=addr_width, data_width=data_width)
-        super().__init__(sig, path=path, src_loc_at=1 + src_loc_at)
+        super().__init__(Signature(addr_width=addr_width, data_width=data_width),
+                         path=path, src_loc_at=1 + src_loc_at)
         self._memory_map = None
 
     @property

amaranth_soc/csr/reg.py

@@ -51,13 +51,20 @@ class Signature(wiring.Signature):
         w_stb : Signal()
             Write strobe. Fields should update their value or perform the write side effect when
             this strobe is asserted.
-
-        Raises
-        ------
-        See :meth:`FieldPort.Signature.check_parameters`.
         """
         def __init__(self, shape, access):
-            self.check_parameters(shape, access)
+            try:
+                Shape.cast(shape)
+            except TypeError as e:
+                raise TypeError(f"Field shape must be a shape-castable object, not {shape!r}") from e
+            # TODO(py3.9): Remove this. Python 3.8 and below use cls.__name__ in the error message
+            # instead of cls.__qualname__.
+            # FieldPort.Access(access)
+            try:
+                FieldPort.Access(access)
+            except ValueError as e:
+                raise ValueError(f"{access!r} is not a valid FieldPort.Access") from e
+
             self._shape  = Shape.cast(shape)
             self._access = FieldPort.Access(access)
 
@@ -76,29 +83,6 @@ def shape(self):
         def access(self):
             return self._access
 
-        @classmethod
-        def check_parameters(cls, shape, access):
-            """Validate signature parameters.
-
-            Raises
-            ------
-            :exc:`TypeError`
-                If ``shape`` is not a shape-castable object.
-            :exc:`ValueError`
-                If ``access`` is not a member of :class:`FieldPort.Access`.
-            """
-            try:
-                Shape.cast(shape)
-            except TypeError as e:
-                raise TypeError(f"Field shape must be a shape-castable object, not {shape!r}") from e
-            # TODO(py3.9): Remove this. Python 3.8 and below use cls.__name__ in the error message
-            # instead of cls.__qualname__.
-            # FieldPort.Access(access)
-            try:
-                FieldPort.Access(access)
-            except ValueError as e:
-                raise ValueError(f"{access!r} is not a valid FieldPort.Access") from e
-
         def create(self, *, path=None, src_loc_at=0):
             """Create a compatible interface.
 

amaranth_soc/event.py

@@ -27,13 +27,16 @@ class Signature(wiring.Signature):
             Input line. Sampled in order to detect an event.
         trg : Signal()
             Event trigger. Asserted when an event occurs, according to the trigger mode.
-
-        Raises
-        ------
-        See :meth:`Source.Signature.check_parameters`.
         """
         def __init__(self, *, trigger="level"):
-            self.check_parameters(trigger=trigger)
+            # TODO(py3.9): Remove this. Python 3.8 and below use cls.__name__ in the error message
+            # instead of cls.__qualname__.
+            # Source.Trigger(trigger)
+            try:
+                Source.Trigger(trigger)
+            except ValueError as e:
+                raise ValueError(f"{trigger!r} is not a valid Source.Trigger") from e
+
             super().__init__({
                 "i":   Out(1),
                 "trg": In(1),
@@ -44,22 +47,6 @@ def __init__(self, *, trigger="level"):
         def trigger(self):
             return self._trigger
 
-        def check_parameters(cls, *, trigger):
-            """Validate signature parameters.
-
-            Raises
-            ------
-            :exc:`ValueError`
-                If ``trigger`` is not a member of :class:`Source.Trigger`.
-            """
-            # TODO(py3.9): Remove this. Python 3.8 and below use cls.__name__ in the error message
-            # instead of cls.__qualname__.
-            # Source.Trigger(trigger)
-            try:
-                Source.Trigger(trigger)
-            except ValueError as e:
-                raise ValueError(f"{trigger!r} is not a valid Source.Trigger") from e
-
         def create(self, *, path=None, src_loc_at=0):
             """Create a compatible interface.
 
@@ -94,10 +81,6 @@ def __repr__(self):
     ----------
     event_map : :class:`EventMap`
         A collection of event sources.
-
-    Raises
-    ------
-    See :meth:`Source.Signature.check_parameters`.
     """
     def __init__(self, *, trigger="level", path=None, src_loc_at=0):
         super().__init__(Source.Signature(trigger=trigger), path=path, src_loc_at=1 + src_loc_at)

amaranth_soc/wishbone/bus.py

@@ -46,12 +46,10 @@ class Signature(wiring.Signature):
     ----------
     addr_width : int
         Width of the address signal.
-    data_width : int
+    data_width : ``8``, ``16``, ``32`` or ``64``
         Width of the data signals ("port size" in Wishbone terminology).
-        One of 8, 16, 32, 64.
-    granularity : int
+    granularity : ``8``, ``16``, ``32``, ``64`` or ``None``
         Granularity of select signals ("port granularity" in Wishbone terminology).
-        One of 8, 16, 32, 64.
         Optional. If ``None`` (by default), the granularity is equal to ``data_width``.
     features : iter(:class:`Feature`)
         Selects additional signals that will be a part of this interface.
@@ -94,16 +92,22 @@ class Signature(wiring.Signature):
         Optional. Corresponds to Wishbone signal ``CTI_O`` (initiator) or ``CTI_I`` (target).
     bte : Signal()
         Optional. Corresponds to Wishbone signal ``BTE_O`` (initiator) or ``BTE_I`` (target).
-
-    Raises
-    ------
-    See :meth:`Signature.check_parameters`.
     """
     def __init__(self, *, addr_width, data_width, granularity=None, features=frozenset()):
         if granularity is None:
-            granularity  = data_width
-        self.check_parameters(addr_width=addr_width, data_width=data_width, granularity=granularity,
-                              features=features)
+            granularity = data_width
+
+        if not isinstance(addr_width, int) or addr_width < 0:
+            raise TypeError(f"Address width must be a non-negative integer, not {addr_width!r}")
+        if data_width not in (8, 16, 32, 64):
+            raise ValueError(f"Data width must be one of 8, 16, 32, 64, not {data_width!r}")
+        if granularity not in (8, 16, 32, 64):
+            raise ValueError(f"Granularity must be one of 8, 16, 32, 64, not {granularity!r}")
+        if granularity > data_width:
+            raise ValueError(f"Granularity {granularity} may not be greater than data width "
+                             f"{data_width}")
+        for feature in features:
+            Feature(feature) # raises ValueError if feature is invalid
 
         self._addr_width  = addr_width
         self._data_width  = data_width
@@ -150,35 +154,6 @@ def granularity(self):
     def features(self):
         return self._features
 
-    @classmethod
-    def check_parameters(cls, *, addr_width, data_width, granularity, features):
-        """Validate signature parameters.
-
-        Raises
-        ------
-        :exc:`TypeError`
-            If ``addr_width`` is not an integer greater than or equal to 0.
-        :exc:`ValueError`
-            If ``data_width`` is not 8, 16, 32 or 64.
-        :exc:`ValueError`
-            If ``granularity`` is not 8, 16, 32 or 64.
-        :exc:`ValueError`
-            If ``granularity`` is greater than ``data_width``.
-        :exc:`ValueError`
-            If ``features`` contains other values than :class:`Feature` members.
-        """
-        if not isinstance(addr_width, int) or addr_width < 0:
-            raise TypeError(f"Address width must be a non-negative integer, not {addr_width!r}")
-        if data_width not in (8, 16, 32, 64):
-            raise ValueError(f"Data width must be one of 8, 16, 32, 64, not {data_width!r}")
-        if granularity not in (8, 16, 32, 64):
-            raise ValueError(f"Granularity must be one of 8, 16, 32, 64, not {granularity!r}")
-        if granularity > data_width:
-            raise ValueError(f"Granularity {granularity} may not be greater than data width "
-                             f"{data_width}")
-        for feature in features:
-            Feature(feature) # raises ValueError if feature is invalid
-
     def create(self, *, path=None, src_loc_at=0):
         """Create a compatible interface.
 
@@ -232,10 +207,6 @@ class Interface(wiring.PureInterface):
     ----------
     memory_map: :class:`MemoryMap`
         Memory map of the bus. Optional.
-
-    Raises
-    ------
-    See :meth:`Signature.check_parameters`.
     """
     def __init__(self, *, addr_width, data_width, granularity=None, features=frozenset(),
                  path=None, src_loc_at=0):

tests/test_csr_bus.py

@@ -131,14 +131,11 @@ def test_wrong_addr_width(self):
         with self.assertRaisesRegex(TypeError,
                 r"Address width must be a positive integer, not -1"):
             csr.Signature(addr_width=-1, data_width=8)
-        with self.assertRaisesRegex(TypeError,
-                r"Address width must be a positive integer, not -1"):
-            csr.Signature.check_parameters(addr_width=-1, data_width=8)
 
     def test_wrong_data_width(self):
         with self.assertRaisesRegex(TypeError,
                 r"Data width must be a positive integer, not -1"):
-            csr.Signature.check_parameters(addr_width=16, data_width=-1)
+            csr.Signature(addr_width=16, data_width=-1)
 
 
 class InterfaceTestCase(unittest.TestCase):

tests/test_wishbone_bus.py

@@ -106,44 +106,25 @@ def test_wrong_addr_width(self):
         with self.assertRaisesRegex(TypeError,
                 r"Address width must be a non-negative integer, not -1"):
             wishbone.Signature(addr_width=-1, data_width=8)
-        with self.assertRaisesRegex(TypeError,
-                r"Address width must be a non-negative integer, not -1"):
-            wishbone.Signature.check_parameters(addr_width=-1, data_width=8, granularity=8,
-                                                features=())
 
     def test_wrong_data_width(self):
         with self.assertRaisesRegex(ValueError,
                 r"Data width must be one of 8, 16, 32, 64, not 7"):
             wishbone.Signature(addr_width=0, data_width=7)
-        with self.assertRaisesRegex(ValueError,
-                r"Data width must be one of 8, 16, 32, 64, not 7"):
-            wishbone.Signature.check_parameters(addr_width=0, data_width=7, granularity=7,
-                                                features=())
 
     def test_wrong_granularity(self):
         with self.assertRaisesRegex(ValueError,
                 r"Granularity must be one of 8, 16, 32, 64, not 7"):
             wishbone.Signature(addr_width=0, data_width=32, granularity=7)
-        with self.assertRaisesRegex(ValueError,
-                r"Granularity must be one of 8, 16, 32, 64, not 7"):
-            wishbone.Signature.check_parameters(addr_width=0, data_width=32, granularity=7,
-                                                features=())
 
     def test_wrong_granularity_wide(self):
         with self.assertRaisesRegex(ValueError,
                 r"Granularity 32 may not be greater than data width 8"):
             wishbone.Signature(addr_width=0, data_width=8, granularity=32)
-        with self.assertRaisesRegex(ValueError,
-                r"Granularity 32 may not be greater than data width 8"):
-            wishbone.Signature.check_parameters(addr_width=0, data_width=8, granularity=32,
-                                                features=())
 
     def test_wrong_features(self):
         with self.assertRaisesRegex(ValueError, r"'foo' is not a valid Feature"):
             wishbone.Signature(addr_width=0, data_width=8, features={"foo"})
-        with self.assertRaisesRegex(ValueError, r"'foo' is not a valid Feature"):
-            wishbone.Signature.check_parameters(addr_width=0, data_width=8, granularity=8,
-                                                features={"foo"})
 
 
 class InterfaceTestCase(unittest.TestCase):