This repository has been archived by the owner on May 17, 2021. It is now read-only.
-
-
Notifications
You must be signed in to change notification settings - Fork 1.7k
Z wave Binding Examples
Ben Margolin edited this page Sep 19, 2016
·
48 revisions
Here are some examples of valid z-wave binding configuration strings, as defined in the items configuration file:
- Generic
- Lighting and Bulbs
- Remote Controls
- Sensors
- Smoke Detectors
- Switches
- Thermostats
- Weather Stations
#Generic
###General z-wave statistics
Number ZwaveStatsSOF "Number Start of Frames[%s]" (gZwaveStats) {zwave="1:command=info,item=sof"}
Number ZwaveStatsACK "Number of Acknowledgments [%s]" (gZwaveStats) {zwave="1:command=info,item=ack"}
Number ZwaveStatsCAN "Number of CAN [%s]" (gZwaveStats) {zwave="1:command=info,item=can"}
Number ZwaveStatsNAK "Number of NAK [%s]" (gZwaveStats) {zwave="1:command=info,item=nak"}
Number ZwaveStatsOOF "Number of OOF [%s]" (gZwaveStats) {zwave="1:command=info,item=oof"}
Number ZwaveStatsTimeout "Number of Time-outs [%s]" (gZwaveStats) {zwave="1:command=info,item=time_out"}
String ZwaveNode01HomeID "Home ID [%s]" (gZwaveNode01) {zwave="1:command=info,item=home_id"}
Number ZwaveNode01NetworkID "Node ID [%s]" (gZwaveNode01) {zwave="1:command=info,item=node_id"}
###Generic dimmer and a contact
Dimmer Light_Corridor_Dimmer "Hallway Dimmer [%d %%]" (GF_Corridor) {zwave="6"}
Contact Door_Corridor_Switch "Front door sensor [MAP(nl.map):%s]" (GF_Corridor) {zwave="21:command=sensor_binary,respond_to_basic=true"}
Number Door_Corridor_Battery "Front door sensor battery level [%d %%]" (GF_Corridor) { zwave="21:command=battery" }
###Generic node with multiple endpoints
Switch Mech_Vent "Mechanical ventilation middle." (GF_Kitchen) {zwave="11:1"}
Switch Mech_Vent_High "Mechanical ventilation high." (GF_Kitchen) {zwave="11:2"}
#Lighting and Bulbs
###Aeotec Micro Smart Switch (2nd Gen) (MSS2E)
Switch Bathroom_Switch "Bathroom Switch" <switch> { zwave="4:command=switch_binary,respond_to_basic=true" }
Number Bathroom_Switch_Power "Bathroom Switch Power [%.1f W]" { zwave="4:command=meter,meter_scale=E_W" }
###Domitech ZBULB
Switch Light_Landing "Landing Light" <whites> (FF_Hall,Lights) {zwave="37:respond_to_basic=true"}
Dimmer Light_LandingBrightness "Landing Brightness" <whites> (FF_Hall,Lights) {zwave="37:command=switch_multilevel"}
###Everspring Wireless Dimmer ADA1311
Dimmer Light { zwave="6:command=SWITCH_MULTILEVEL,respond_to_basic=true" }
###Fibaro Relay 1x2.5kW
Switch Fibaro_Relay "Fibaro Relay" <switch> { zwave="2" }
###Fibaro RGBW Controller
Group gWohnzimmer "Wohnzimmer" <sofa> (gAlles)
Group gwzRGBW "TV Rücklicht Erweitert" <sofa> (gWohnzimmer)
Color wzRGBW "TV Rücklicht" <slider> (gwzRGBW)
Dimmer wzRGBW_All "Helligkeit [%d %%]" <switch> (gwzRGBW) {zwave="2"}
Dimmer wzRGBW_R "Rot [%d %%]" <switch> (gwzRGBW) {zwave="2:2:command=switch_multilevel"}
Dimmer wzRGBW_G "Grün [%d %%]" <switch> (gwzRGBW) {zwave="2:3:command=switch_multilevel"}
Dimmer wzRGBW_B "Blau [%d %%]" <switch> (gwzRGBW) {zwave="2:4:command=switch_multilevel"}
Dimmer wzRGBW_W "Weiß [%d %%]" <switch> (gwzRGBW) {zwave="2:5:command=switch_multilevel"}
Switch wzRGBW_Switch "Schalter Alle" <switch> (gwzRGBW) { zwave="2:1"}
Switch wzRGBW_R_Switch "Schalter Rot" <switch> (gwzRGBW) { zwave="2:2"}
Switch wzRGBW_G_Switch "Schalter Grün" <switch> (gwzRGBW) { zwave="2:3"}
Switch wzRGBW_B_Switch "Schalter Blau" <switch> (gwzRGBW) { zwave="2:4"}
Switch wzRGBW_W_Switch "Schalter Weiß" <switch> (gwzRGBW) { zwave="2:5"}
Number wzRGBW_Power "Stromverbrauch [%.1f W]" <energy> (gwzRGBW) { zwave="2:command=sensor_multilevel"}
Number wzRGBW_Energy "Gesamtverbrauch [%.2f KWh]" <energy> (gwzRGBW) { zwave="2:command=meter", refresh_interval=60}
###Fibaro Universal Dimmer (FGD-211)
Switch swLight_HallCeiling "Hall: Ceiling" { zwave="9:command=SWITCH_MULTILEVEL" }
Dimmer diLight_HallCeiling "Hall: Ceiling [%d %%]" { zwave="9:command=SWITCH_MULTILEVEL" }
Switch swScene1_HallCeiling "Hall-Simpleclick" { zwave="9:command=SCENE_ACTIVATION,scene=26,state=0" }
Switch swScene2_HallCeiling "Hall-Doubleclick" { zwave="9:command=SCENE_ACTIVATION,scene=24,state=0" }
Switch swScene3_HallCeiling "Hall-Tripleclick" { zwave="9:command=SCENE_ACTIVATION,scene=25,state=0" }
###Fibaro Universal Dimmer 2 (FGD-212)
Switch foo "Foo" { zwave="42:command=SWITCH_MULTILEVEL" }
Dimmer foo_dim "Foo [%d %%]" { zwave="42:command=SWITCH_MULTILEVEL" }
Number foo_power "Foo - current power consumption [%.2f W]" { zwave="42:command=METER,meter_scale=E_W,refresh_interval=300" }
Number foo_energy "Foo - total energy use [%.2f KWh]" { zwave="42:command=METER,meter_scale=E_KWh,refresh_interval=300" }
###Lineartec LB60Z-1
Dimmer myLight "Light" { zwave="2:command=SWITCH_MULTILEVEL" }
###Qubino Flush Dimmer Plus (ZMNHDD)
Dimmer Qubino_Dimmer "Qubino Dimmer [%d %%] { zwave="3:command=switch_multilevel" }
Number Qubino_Power "Qubino Power [%.2f W]" { zwave="3:command=meter,meter_scale=E_W" }
Number Qubino_Energy "Qubino Energy [%.2f kWh]" { zwave="3:command=meter,meter_scale=E_KWh,refresh_interval=900" }
###Qubino Flush 1 Relay (ZMNHAA)
Switch Qubino_Switch "Qubino Switch" <switch> { zwave="2:command=switch_binary" }
Number Qubino_Power "Qubino Power [%.2f W]" { zwave="2:command=meter,meter_scale=E_W" }
Number Qubino_Energy "Qubino Energy [%.2f kWh]" { zwave="2:command=meter,meter_scale=E_KWh" }
#Remote Controls
###Nodon CRC 3100 (Octan Remote) and CRC3605 (SoftRemote)
- Change the configuration parameter 3 to 1.
- Create the items as shown below:
Switch Nodon_Button1_Single "Nodon_Button1_Single" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=10,state=1" }
Switch Nodon_Button2_Single "Nodon_Button2_Single" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=20,state=1" }
Switch Nodon_Button3_Single "Nodon_Button3_Single" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=30,state=1" }
Switch Nodon_Button4_Single "Nodon_Button4_Single" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=40,state=1" }
Switch Nodon_Button1_Long "Nodon_Button1_Long" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=12,state=1" }
Switch Nodon_Button2_Long "Nodon_Button2_Long" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=22,state=1" }
Switch Nodon_Button3_Long "Nodon_Button3_Long" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=32,state=1" }
Switch Nodon_Button4_Long "Nodon_Button4_Long" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=42,state=1" }
Switch Nodon_Button1_Release "Nodon_Button1_Release" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=11,state=1" }
Switch Nodon_Button2_Release "Nodon_Button2_Release" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=21,state=1" }
Switch Nodon_Button3_Release "Nodon_Button3_Release" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=31,state=1" }
Switch Nodon_Button4_Release "Nodon_Button4_Release" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=41,state=1" }
Switch Nodon_Button1_Double "Nodon_Button1_Double" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=13,state=1" }
Switch Nodon_Button2_Double "Nodon_Button2_Double" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=23,state=1" }
Switch Nodon_Button3_Double "Nodon_Button3_Double" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=33,state=1" }
Switch Nodon_Button4_Double "Nodon_Button4_Double" <switch> { zwave="8:command=SCENE_ACTIVATION,scene=43,state=1" }
#Sensors
###Aeotec Door/Window Sensor (2nd Edition) Model: DSB29-ZWUS
Contact zwave_contact_16_sensor "office - test door" (doors,monitor) {zwave="16:command=basic,respond_to_basic=true"}
Contact zwave_contact_16_tamper "office - test door tamper" (doors,tamper) {zwave="16:command=ALARM"}
Number FrontDoorBattery "office - test door battery [%d %%]" <battery> (doors,battery) {zwave="16:command=BATTERY"}
###Aeotec hidden door sensor (gen 5, DSB54)
Contact garagewalkin_1_sensor "garage walk-in [%s]" (ALL,ff,sensor) {zwave="3:command=BASIC"}
Number garagewalkin_1_battery "garage walk-in battery [%d %%]" <battery> (ALL,battery) {zwave="3:command=BATTERY"}
###Aeotec Multi Sensor 4
Number Multi1_temp "office - Multi Temperature [%.1f °F]" (multi,multiGraph) {zwave="10:command=SENSOR_MULTILEVEL,sensor_type=1"}
Number Multi1_humidity "office - Multi Humidity [%.0f %%]" (multi,multiGraph) {zwave="10:command=SENSOR_MULTILEVEL,sensor_type=5"}
Number Multi1_luminance "office - Multi Luminance [%.0f Lux]" (multi) {zwave="10:command=SENSOR_MULTILEVEL,sensor_type=3"}
Contact Multi1_motion "office - Multi motion [MAP(motion.map):%s]" <motion> (multi,motion) {zwave="10:command=SENSOR_BINARY,respond_to_basic=true"}
Number Multi1_battery "office - Multi battery [%d %%]" <battery> (multi,battery) {zwave="10:command=BATTERY"}
###Aeotec Multi Sensor 6
Contact Motion_GFToilet "Motion [MAP(motion.map):%s]" (GF_Toilet) { zwave="8:command=sensor_binary,respond_to_basic=true" }
Number Alarm_GFToilet "Alarm: [%s]" (GF_Toilet) { zwave="8:command=alarm" }
Number Temp_GFToilet "Temperature: [%.1f °C]" (GF_Toilet) { zwave="8:command=sensor_multilevel,sensor_type=1,sensor_scale=0" }
Number Humid_GFToilet "Humidity: [%.0f %%]" (GF_Toilet) { zwave="8:command=sensor_multilevel,sensor_type=5" }
Number Lumin_GFToilet "Luminance: [%.0f Lux]" (GF_Toilet) { zwave="8:command=sensor_multilevel,sensor_type=3" }
Number UV_GFToilet "Luminance: [UV index %d]" (GF_Toilet) { zwave="8:command=sensor_multilevel,sensor_type=27" }
Number Battery_GFToilet "Battery: [%d %%]" (GF_Toilet) { zwave="8:command=battery" }
###D-Link DCH-Z110
Contact C "Movement [%s]" (gf) { zwave="10:command=SENSOR_BINARY,respond_to_basic=TRUE" }
Number T "Temperature [%.1f °C]" (gf) { zwave="10:command=sensor_multilevel,sensor_type=1" }
Number H "Luminance [%.0f Lux]" (gf) { zwave="10:command=sensor_multilevel,sensor_type=3" }
###Ecolink tiltzwave1 garage door sensor:
Group DoorsWindows "Doors and Windows"
Contact GarageDoor "Garage Door is [MAP(en.map):%s]" (DoorsWindows){zwave="3:command=SENSOR_BINARY"}
###Ecolink PIR motion detector
Contact EntryMotion "entry motion [MAP(motion.map):%s]" (ALL,motion,ff) {zwave="4:command=SENSOR_BINARY"}
Contact EntryMotionTamper "entry motion tamper [MAP(tamper.map):%s]" <battery> (ALL,tamper) {zwave="4:command=ALARM"}
Number EntryMotionBattery "entry motion battery [%d %%]" <battery> (ALL,battery) {zwave="4:command=BATTERY"}
###Everspring Flood Detector model:ST812-2
Contact zwave_water_9_sensor "office - water sensor 2" <water> (water,monitor) {zwave="9:command=SENSOR_ALARM"}
Number Water_sensor_battery "office - water sensor 2 battery [%d %%]" <battery> (water,battery) {zwave="9:command=BATTERY"}
###Everspring ST814 temperature and humidity sensor
Number T_AZH "Temperature [%.1f °C]" (AZH) {zwave="32:command=sensor_multilevel,sensor_type=1" }
Number RH_AZH "Humidity [%.0f %%]" (AZH) { zwave="32:command=sensor_multilevel,sensor_type=5" }
Number BAT_AZH "Battery [%.0f %%]" (AZH) { zwave="32:command=battery" }
###Fortrez water/temperature sensor
Number WaterTemp3 "Water Temp 3" (water,temp) {zwave="18:command=SENSOR_MULTILEVEL,sensor_type=1"}
Contact Water3 "water sensor 3" (water) {zwave="18"}
Number Water3_battery "Water 3 battery [%s %%]" (water) {zwave="18:command=BATTERY"}
###Fibaro Door-Contact (FGK-101)
Contact coStatus_DoorBell "Doorbell: [MAP(bell.map):%s]" { zwave="10:command=SENSOR_BINARY,respond_to_basic=TRUE" }
Number nuBattery_DoorBell "Doorbell: Battery [%s %%]" { zwave="10:command=BATTERY" }
###Fibaro FGK-101 door sensor (requires DS18B20 to be added):
Number Temp_UtilityRoom "Utility room temperature [%.1f °C]" { zwave="7:2:command=SENSOR_MULTILEVEL" }
###Fibaro Flood-Sensor (FGFS-101)
Contact coFibFlood_Alarm "Water-Sensor: [MAP(water.map):%s]" { zwave="11:command=SENSOR_ALARM, alarm_type=5,respond_to_basic=TRUE" }
Number nuFibFlood_Battery "Water-Sensor: Batterie [%s %%]" { zwave="11:command=BATTERY" }
Number nuFibFlood_Temp "Water-Sensor: Temperatur [%.1f °C]" { zwave="11:2:command=sensor_multilevel" }
Switch swFibFlood_Tamper "Water-Sensor: Tamper" { zwave="11:command=sensor_alarm, alarm_type=0,respond_to_basic=true" }
###Fibaro Multisensor (FIB_FGMS-001)
Number Movement "Movement: [%s]" <present> { zwave="4:command=sensor_binary" }
Number Alarm "Alarm: [%s]" <fire> { zwave="4:command=sensor_alarm" }
Number Lux "Lux: [%.2f Lux]" <sun> { zwave="4:command=sensor_multilevel,sensor_type=3" }
Number Bat "Battery: [%d %%]" <energy> { zwave="4:command=battery" }
Number Temp "Temperature: [%.1f °C]" <temperature> { zwave="4:command=sensor_multilevel,sensor_type=1" }
###Fibaro Universal Sensor
Contact Z_deurbel0 "Z_deurbel_sensor" { zwave="8:0:command=SENSOR_BINARY,respond_to_basic=TRUE" }
Contact Z_deurbel1 "Z_deurbel_input1" { zwave="8:1:command=SENSOR_BINARY,respond_to_basic=TRUE" }
Contact Z_deurbel2 "deurbel" { zwave="8:2:command=SENSOR_BINARY,respond_to_basic=TRUE" }
###Fibaro Universal Sensor with attached DS18B20 temperature sensors
Number Sensor_Temp_1 "Temp1 [%.2f °C]" { zwave="17:3:command=sensor_multilevel" }
Number Sensor_Temp_2 "Temp2 [%.2f °C]" { zwave="17:4:command=sensor_multilevel" }
Number Sensor_Temp_3 "Temp3 [%.2f °C]" { zwave="17:5:command=sensor_multilevel" }
###Monoprice motion detector (ZP3102)
Contact OfficeMotion "office motion [MAP(motion.map):%s]" (ALL,motion,ff) {zwave="2:command=BASIC"}
Number OfficeMotionBattery "office motion battery [%d %%]" (ALL,battery) {zwave="2:command=BATTERY"}
Contact OfficeMotionTamper "office motion tamper [MAP(tamper.map):%s]" (ALL,tamper) {zwave="2:command=ALARM"}
Number OfficeMotionTemp "office temp [%.1f °F]" <temperature> (ALL,temperature,ff) {zwave="2:command=sensor_multilevel,sensor_type=1,sensor_scale=1" }
###Philio 4in1 Multisensor (PST-02) Contact KitchenMotion "Kitchen Motion [%s]" (motion) { zwave="2:command=sensor_binary,sensor_type=12" } Contact KitchenDoor "Kitchen Door [%s]" (door) { zwave="2:command=sensor_binary,sensor_type=10" } Number KitchenTemp "Kitchen Temp [%.1f]" (temp) { zwave="2:command=sensor_multilevel,sensor_type=1,sensor_scale=0" } Number KitchenBrightness "Kitchen Brightness [%d]" (brightness) { zwave="2:command=sensor_multilevel,sensor_type=3" } Contact KitchenTamper "Kitchen Tamper [%s]" (alarm) { zwave="2:command=alarm" } Number KitchenBattery "Kitchen Battery [%d]" (battery) { zwave="2:command=battery" }
###Vision Security Door/Window Sensor
Contact Contact_BackDoor "Back Door [MAP(motion.map):%s]" (GF_Kitchen) {zwave="5:command=basic,respond_to_basic=true"}
Number Battery_BackDoor "Back Door Battery: [%d %%]" (GF_Kitchen,Battery) {zwave="5:command=battery"}
###Zooz 4-in-1 Multisensor (ZSE40)
Contact UPSTAIRS_HALLWAY_PIR_TAMPER "Upstairs Hallway Tamper [MAP(zwave_motion.map):%s]" (Group_Motion, Group_Persistence, Group_Upstairs) {zwave="58:command=ALARM"}
Number UPSTAIRS_HALLWAY_PIR_BATTERY "Upstairs Hallway Battery [%d %%]" (Group_Motion, Group_Persistence, Group_Upstairs) {zwave="58:command=BATTERY"}
Number UPSTAIRS_HALLWAY_PIR_TEMPERATURE "Upstairs Hallway Temperature [%.2f F]" (Group_Motion, Group_Persistence, Group_Upstairs) {zwave="58:command=sensor_multilevel,sensor_type=1,sensor_scale=1"}
Number UPSTAIRS_HALLWAY_PIR_LIGHT "Upstairs Hallway Light [%.1f %%]" (Group_Motion, Group_Persistence, Group_Upstairs) {zwave="58:command=sensor_multilevel,sensor_type=3"}
Number UPSTAIRS_HALLWAY_PIR_REL_HUMID "Upstairs Hallway RH [%.0f %%]" (Group_Motion, Group_Persistence, Group_Upstairs) {zwave="58:command=sensor_multilevel,sensor_type=5"}
Contact UPSTAIRS_HALLWAY_PIR_MOTION "Upstairs Hallway Motion [MAP(zwave_motion.map):%s]" (Group_Motion, Group_Persistence, Group_Upstairs) {zwave="58:command=BASIC"}
zwave_motion.map
CLOSED=No Motion
OPEN=MOTION
-=(No value yet)
zwave_tamper.map
CLOSED=No Tamper
OPEN=TAMPER
-=(No value yet)
#Shutters
###Fibaro Rollershutter FGRM-222 (v1 and v2 HW revisions)
Rollershutter kdSHUTTER "Roller shutter [%d %%]" (gkdSHUTTER) {zwave="3:command=switch_multilevel,invert_state=false,invert_percent=true"}
Rollershutter VenetianSHUTTERv1 "Venetian blind (blind position) [%d %%]" (gkdSHUTTER) {zwave="4:command=FIBARO_FGRM_222,type=shutter"}
Rollershutter VenetianLAMELLAv1 "Venetian blind (lamella tilt) [%d %%]" (gkdSHUTTER) {zwave="4:command=FIBARO_FGRM_222,type=lamella"}
Rollershutter VenetianSHUTTERv2 "Venetian blind (blind position) [%d %%]" (gkdSHUTTER) {zwave="4:command=MANUFACTURER_PROPRIETARY,type=shutter"}
Rollershutter VenetianLAMELLAv2 "Venetian blind (lamella tilt) [%d %%]" (gkdSHUTTER) {zwave="4:command=MANUFACTURER_PROPRIETARY,type=lamella"}
Number kdSHUTTER_Power "current power usage [%.1f W]" <energy> (gkdSHUTTER) { zwave="3:command=sensor_multilevel"}
Number kdSHUTTER_Energy "power consumption [%.2f KWh]" <energy> (gkdSHUTTER) { zwave="3:command=meter" }
#Smoke Detectors
###Monoprice Smoke detector (Vision Security ZS6101)
Contact iSmokeSensorMasterAlarm "Master Status [%s]" <fire> (gSmokeSensorMaster) { zwave="8:command=SENSOR_BINARY,respond_to_basic=true" }
Number iSmokeSensorMasterBattery "Master Battery [%s]" <battery> (gSmokeSensorMaster) { zwave="8:command=BATTERY" }
###Fibaro Smoke detector (FGSS101, FGSD002)
Contact Z_Kitchen_Smoke "Smoke detector is [%s]" (Smoke_Alarm) {zwave="6:command=sensor_alarm,alarm_type=1" }
Contact Z_Kitchen_Heat "Heat detector is [%s]" (Smoke_Alarm) {zwave="6:command=sensor_alarm,alarm_type=4" }
Contact Z_Kitchen_Tamper "Smoke_sensor_K Tamper is[MAP(en.map):%s]" (Tamper_Alarm) { zwave="6:command=sensor_alarm,alarm_type=0" }
Number Z_Kitchen_Battery "Smoke_sensor_batt [%d %%]" (Battery_Levels) {zwave="6:command=battery" }
Number Z_Kitchen_Temp "Kitchen_temperature [%.1f°C]" (Temperatures) {zwave="6:command=sensor_multilevel,sensor_type=1" }
#Switches
###Fibaro Wall Plug (FGWPF-101 & FGWPF-102 & FGWPE)
Switch Wall_Plug "Wall Plug" { zwave="3:command=switch_binary"}
Number Wall_Plug_Power "Wall Plug - current energy [%.1f W]" { zwave="3:command=sensor_multilevel"}
Number Wall_Plug_Energy "Wall Plug - total energy [%.2f KWh]" { zwave="3:command=meter" }
###General Electric GE12722
Switch bedroom_light "Bedroom Light" { zwave="8:command=SWITCH_BINARY" }
###GreenWave PowerNode 6-port power strip
Switch Switch_Powerbar_Subwoofer "Subwoofer" (GF_Living) {zwave="26:1:command=switch_binary"}
Switch Switch_Powerbar_Reiceiver "Receiver" (GF_Living) {zwave="26:2:command=switch_binary"}
Switch Switch_Powerbar_DVD "DVD" (GF_Living) {zwave="26:3:command=switch_binary"}
Switch Switch_Powerbar_TV "TV" (GF_Living) {zwave="26:4:command=switch_binary"}
Switch Switch_Powerbar_Xbox "XBOX-360" (GF_Living) {zwave="26:5:command=switch_binary"}
Switch Switch_Powerbar_PC "Mediacenter" (GF_Living) {zwave="26:6:command=switch_binary"}
Number Power_Powerbar_Subwoofer "Subwoofer power consumption [%d W]" (GF_Living,GF_Energy) {zwave="26:1:command=meter,meter_scale=E_W,refresh_interval=60"}
Number Power_Powerbar_Reiceiver "Receiver power consumption [%d W]" (GF_Living,GF_Energy) {zwave="26:2:command=meter,meter_scale=E_W,refresh_interval=70"}
Number Power_Powerbar_DVD "DVD power consumption [%d W]" (GF_Living,GF_Energy) {zwave="26:3:command=meter,meter_scale=E_W,refresh_interval=60"}
Number Power_Powerbar_TV "TV power consumption [%d W]" (GF_Living,GF_Energy) {zwave="26:4:command=meter,meter_scale=E_W,refresh_interval=70"}
Number Power_Powerbar_Xbox "XBOX-360 power consumption [%d W]" (GF_Living,GF_Energy) {zwave="26:5:command=meter,meter_scale=E_W,refresh_interval=80"}
Number Power_Powerbar_PC "Mediacenter power consumption [%d W]" (GF_Living,GF_Energy) {zwave="26:6:command=meter,meter_scale=E_W,refresh_interval=80"}
Number Energy_Powerbar_Subwoofer "Subwoofer total energy usage [%.4f KWh]" (GF_Living) {zwave="26:1:command=meter,meter_scale=E_KWh,refresh_interval=300"}
Number Energy_Powerbar_Reiceiver "Receiver total energy usage [%.4f KWh]" (GF_Living) {zwave="26:2:command=meter,meter_scale=E_KWh,refresh_interval=310"}
Number Energy_Powerbar_DVD "DVD totaal total energy usage [%.4f KWh]" (GF_Living) {zwave="26:3:command=meter,meter_scale=E_KWh,refresh_interval=320"}
Number Energy_Powerbar_TV "TV total energy usage [%.4f KWh]" (GF_Living) {zwave="26:4:command=meter,meter_scale=E_KWh,refresh_interval=330"}
Number Energy_Powerbar_Xbox "XBOX-360 total energy usage [%.4f KWh]" (GF_Living) {zwave="26:5:command=meter,meter_scale=E_KWh,refresh_interval=340"}
Number Energy_Powerbar_PC "Mediacenter total energy usage [%.4f KWh]" (GF_Living) {zwave="26:6:command=meter,meter_scale=E_KWh,refresh_interval=350"}
###Aeotec Smart Switch 6 (ZW096)
Note: you may need to add ",refresh_interval=" at the end to get more than a single reading at startup.
Switch Smart6 "Smart6 outlet" (ff,ALL,outlet) {zwave="6:command=switch_binary" }
Number Smart6_Power "Smart6 power [%.2f W]" (ALL,power) {zwave="6:command=meter,meter_scale=E_W" }
Number Smart6_Energy "Smart6 consumption [%.2f KWh]" (ALL,power) {zwave="6:command=meter,meter_scale=E_KWh" }
Number Smart6_Volts "Smart6 voltage [%.2f V]" (ALL,power) {zwave="6:command=meter,meter_scale=E_V"}
Number Smart6_Amps "Smart6 amperage [%.2f A]" (ALL,power) {zwave="6:command=meter,meter_scale=E_A"}
###TKB Home TZ68E Wall switches Switch WallSwitch_Hall "Hallway Wall switch" (GF_Hall,MyOpenHAB) {zwave="3"}
###Z-wave.me double paddle wall switch
Switch WCD1_1_BUT1 "Test BUT 1" { zwave="7:command=SCENE_ACTIVATION,scene=11,state=1" }
Switch WCD1_1_BUT3 "Test BUT 3" { zwave="7:command=SCENE_ACTIVATION,scene=12,state=0" }
Switch WCD1_1_BUT2 "Test BUT 2" { zwave="7:command=SCENE_ACTIVATION,scene=21,state=1" }
Switch WCD1_1_BUT4 "Test BUT 4" { zwave="7:command=SCENE_ACTIVATION,scene=22,state=0" }
Switch WCD1_1_SW1 "Test WCD SW 1" (gTest)
Switch WCD1_1_SW2 "Test WCD SW 2" (gTest)
###AspireRF RF9517
Switch Remote_Button "button" { zwave="23:command=BASIC,respond_to_basic=true,refresh_interval=2" }
#Thermostats
###Danfoss LC13 radiator thermostat: Number bedroom_thermostat_setpoint "Bedroom Thermostat Setpoint [%.2f C]" { zwave="3:command=THERMOSTAT_SETPOINT" } Number bedroom_thermostat_battery "Bedroom Thermostat battery [%d %%]" { zwave="3:command=BATTERY" }
###Danfoss RS Room Sensor (014G0160 DRS21) & Devolo MT:2649: Items:
Number EG_WoZi_Raumthermostat_Batteriestatus "EG WoZi Raumthermostat [%d %%]" <battery> (Batt,gGraph) { zwave="81:command=battery" }
Number EG_WoZi_Raumthermostat_Temp "EG WoZi Raumthermostat Temperatur [%.1f °C]" <temperature> (GaeZi,gGraph) { zwave="81:command=SENSOR_MULTILEVEL" }
Number EG_WoZi_Raumthermostat_Temp_Vorwahl "EG WoZi Raumthermostat Temperatur Vorwahl [%.1f °C]" <temperature> { zwave="81:command=THERMOSTAT_SETPOINT" }
Number EG_WoZi_Raumthermostat_Button "EG WoZi Raumthermostat Button" { zwave="81:command=central_scene" }
Rule:
rule "OG Gaestezimmer Thermostat Button"
when
/** Item OG_GaesteZimmer_Raumthermostat_Button changed or **/
Item OG_GaesteZimmer_Raumthermostat_Button received update
then
/**the .state is every time "1" but the rule is triggered when button is pressed **/
/** in the log you will get an error: "Protocoll Error (CAN), resending" **/
end
###Eurotronic Stella Z thermostat:
Number Temp_Sensor_StellaZ_Bad "Badezimmer Temperatur: [%.1f C]" <temperature> (Heizung,Bad,Temperaturen) { zwave="28:command=sensor_multilevel,sensor_type=1" }
Number Battery_Sensor_StellaZ_Bad "Badezimmer Batterie: [%d %%]" <energy> (Heizung,Batterien) { zwave="28:command=battery" }
Number Temp_Setpoint_StellaZ_Bad " [%d]" <temperature> (Heizung,Heizung_Soll) { zwave="28:command=thermostat_setpoint, setpoint_type=1" }
###Honeywell Thermostat with both heating and cooling and in Fahrenheit
Number Down_HVAC_HeatSetPoint "Heat Set [%.0f F]" <thermostat> (Group_HVAC_Downstairs) { zwave="7:command=thermostat_setpoint,setpoint_type=1,setpoint_scale=1" }
Number Down_HVAC_CoolSetPoint "Cool Set [%.0f F]" <thermostat> (Group_HVAC_Downstairs) { zwave="7:command=thermostat_setpoint,setpoint_type=2,setpoint_scale=1" }
Number Down_HVAC_Temperature "Temperature [%.1f °F]" <thermostat> (Group_HVAC_Downstairs) { zwave="7:command=sensor_multilevel,sensor_type=1" }
Number Down_HVAC_Mode "Mode [%d]" (Group_HVAC_Downstairs) { zwave="7:command=thermostat_mode" }
Number Down_HVAC_Fan_Mode "Fan Mode [%d]" (Group_HVAC_Downstairs) { zwave="7:command=thermostat_fan_mode" }
Number Down_HVAC_Operating_State "Opp State [MAP(thermostatOpState.map):%d]" (Group_HVAC_Downstairs) { zwave="7:command=thermostat_operating_state" }
Number Down_HVAC_Fan_State "Fan State [MAP(thermostatFanState.map):%d]" (Group_HVAC_Downstairs) { zwave="7:command=thermostat_fan_state" }
###Heat-it thermostat
Number Temperature { zwave="4:0:command=SENSOR_MULTILEVEL,sensor_type=1" }
Number Set_Temp { zwave="4:command=THERMOSTAT_SETPOINT,setpoint_type=1,setpoint_scale=0" }
Number Mode {zwave="4:0:command=THERMOSTAT_MODE" }
DateTime LastUpdated { zwave="4:command=info,item=LAST_UPDATE"}
###CT100 Thermostat
Number HVAC_HeatSetPoint "Heat Set [%.1f F]" <thermostat> (ALL,HVAC) {zwave="5:command=thermostat_setpoint,setpoint_type=1,setpoint_scale=1" }
Number HVAC_CoolSetPoint "Cool Set [%.1f F]" <thermostat> (ALL,HVAC) {zwave="5:command=thermostat_setpoint,setpoint_type=2,setpoint_scale=1" }
Number HVAC_Temperature "Thermostat temperature [%.1f °F]" <temperature> (ALL,HVAC,ff) {zwave="5:1:command=sensor_multilevel,sensor_type=1,refresh_interval=60"}
Number HVAC_Humidity "Thermostat humidity [%.1f %%]" <humidity> (ALL,HVAC,ff) {zwave="5:2:command=sensor_multilevel,sensor_type=5,refresh_interval=60"}
Number HVAC_Mode "Mode [MAP(thermostatMode.map):%s]" <climate> (ALL,HVAC) {zwave="5:command=thermostat_mode"}
Number HVAC_Fan_Mode "Fan Mode [MAP(thermostatFanMode.map):%s]" (ALL,HVAC) {zwave="5:command=thermostat_fan_mode"}
Number HVAC_Operating_State "Operation State [MAP(thermostatOpState.map):%s]" (ALL,HVAC) {zwave="5:command=thermostat_operating_state,refresh_interval=60"}
Number HVAC_Fan_State "Fan State [MAP(thermostatFanState.map):%s]" (ALL,HVAC) {zwave="5:command=thermostat_fan_state"}
Number HVAC_Battery "Thermostat battery [%d %%]" <battery> (ALL,HVAC,battery) {zwave="5:command=BATTERY"}
###CT100 with refreshing setpoints (so manual changes are captured) items:
Number HVAC_HeatSetPoint "Heat Set [%.0f F]" <temperature> (gHVAC) {zwave="7:command=thermostat_setpoint,setpoint_type=1,setpoint_scale=1,refresh_interval=20" }
Number HVAC_CoolSetPoint "Cool Set [%.0f F]" <temperature> (gHVAC) {zwave="7:command=thermostat_setpoint,setpoint_type=2,setpoint_scale=1,refresh_interval=20" }
Number HVAC_Temperature "Temperature [%.1f F]" <temperature> (gHVAC) {zwave="7:1:command=sensor_multilevel,sensor_type=1,refresh_interval=60" }
Number HVAC_Humidity "Rel Humidity [%.1f %%]" <temperature> (gHVAC) {zwave="7:2:command=sensor_multilevel,sensor_type=5,refresh_interval=60" }
Number HVAC_Mode "Mode [MAP(thermostatMode.map):%d]" (gHVAC) {zwave="7:command=thermostat_mode" }
Number HVAC_Fan_Mode "Fan Mode [MAP(thermostatFanMode.map):%d]" (gHVAC) {zwave="7:command=thermostat_fan_mode" }
Number HVAC_Operating_State "Op State [MAP(thermostatOpState.map):%d]" (gHVAC) {zwave="7:command=thermostat_operating_state,refresh_interval=60" }
Number HVAC_Fan_State "Fan State [MAP(thermostatFanState.map):%d]" (gHVAC) {zwave="7:command=thermostat_fan_state,refresh_interval=60" }
Number HVAC_Battery "Battery State [%d %%]" (gHVAC) {zwave="7:command=BATTERY"}
###CT100 Complete Example Visit this CT100 Page for a complete example including items, transform and rules!
###TBZ48 thermostat (does not have humidity sensor)
Number HVAC_HeatSetPoint "Heat Set [%.1f F]" <thermostat> (HVAC) {zwave="15:command=THERMOSTAT_SETPOINT,setpoint_type=1,setpoint_scale=1" }
Number HVAC_CoolSetPoint "Cool Set [%.1f F]" <thermostat> (HVAC) {zwave="15:command=thermostat_setpoint,setpoint_type=2,setpoint_scale=1" }
Number HVAC_Temperature "Thermostat temperature [%.1f °F]" <temperature> (HVAC) {zwave="15:command=sensor_multilevel,sensor_type=1,refresh_interval=60"}
Number HVAC_Mode "Mode [MAP(thermostatMode.map):%s]" <climate> (HVAC) {zwave="15:command=thermostat_mode"}
Number HVAC_Fan_Mode "Fan Mode [MAP(thermostatFanMode.map):%s]" <wind> (HVAC) {zwave="15:command=thermostat_fan_mode"}
Number HVAC_Operating_State "Operation State [MAP(thermostatOpState.map):%s]" <climate> (HVAC) {zwave="15:command=thermostat_operating_state,refresh_interval=60"}
Number HVAC_Fan_State "Fan State [MAP(thermostatFanState.map):%s]" <wind> (HVAC) {zwave="15:command=thermostat_fan_state"}
Number HVAC_Battery "HVAC battery state [%d %%]" <battery> (HVAC,battery) {zwave="15:command=BATTERY"}
###Horstmann HRT4-ZW Thermostat
Number Battery_Sensor_Thermostat "Thermostat Battery: [%d %%]" (GF_Lounge,Battery) {zwave="31:command=battery"}
Number Temp_Desired_Thermostat "Thermostat Desired Temp: [%.1f C]" (GF_Lounge,MyOpenHAB) {zwave="31:command=thermostat_setpoint, setpoint_type=1"}
Number Temp_Sensor_Thermostat "Thermostat Measured Temp: [%.1f C]" (GF_Lounge,MyOpenHAB) {zwave="31:command=sensor_multilevel, sensor_type=1"}
Number HeatCall_Thermostat "Thermostat calling for heat [MAP(heat.map):%d]" (GF_Lounge) {zwave="31:command=switch_binary"}
###Horstmann ASR-ZW Boiler Switch
Switch Boiler_Sensor "Boiler Switch" (GF_Hall) {zwave="33:command=switch_binary"}
Number Boiler_Thermo "Boiler Status [MAP(thermostatmode.map):%d]" (GF_Hall) {zwave="33:command=thermostat_mode,refresh_interval=600"}
#Weather Stations
###Z-Weather Weather Station
Number Windspeed "Wind [%.2f m/s]" <wind> (weather_station) { zwave="5:command=sensor_multilevel,sensor_type=6,refresh_interval=300" }
Number Luminance "Luminance [%.1f %%]" (weather_station) { zwave="5:command=sensor_multilevel,sensor_type=3,refresh_interval=300" }
Number RelativeHumidity "Humidity [%.1f %%]" (weather_station) { zwave="5:command=sensor_multilevel,sensor_type=5,refresh_interval=300" }
Number DewPoint "Dew Point [%.1f °C]" (weather_station) { zwave="5:command=sensor_multilevel,sensor_type=11,refresh_interval=300" }
Number BarometricPressure "Barometric Pressure [%.1f kPa]" (weather_station) { zwave="5:command=sensor_multilevel,sensor_type=9,refresh_interval=300" }
Number TempWeatherStation "Temp Weatherstation [%.1f °C]" <temperature> (weather_station) { zwave="5:command=sensor_multilevel,sensor_type=1,refresh_interval=300" }
Number BatteryWeatherStation "Battery Weatherstation [%.2f %%]" { zwave="5:command=battery,refresh_interval=600" }
ℹ Please find all documentation for openHAB 2 under http://docs.openhab.org.
The wiki pages here contain (outdated) documentation for the older openHAB 1.x version. Please be aware that a lot of core details changed with openHAB 2.0 and this wiki as well as all tutorials found for openHAB 1.x might be misleading. Check http://docs.openhab.org for more details and consult the community forum for all remaining questions.
- Classic UI
- iOS Client
- Android Client
- Windows Phone Client
- GreenT UI
- CometVisu
- Kodi
- Chrome Extension
- Alfred Workflow
- Cosm Persistence
- db4o Persistence
- Amazon DynamoDB Persistence
- Exec Persistence
- Google Calendar Presence Simulator
- InfluxDB Persistence
- JDBC Persistence
- JPA Persistence
- Logging Persistence
- mapdb Persistence
- MongoDB Persistence
- MQTT Persistence
- my.openHAB Persistence
- MySQL Persistence
- rrd4j Persistence
- Sen.Se Persistence
- SiteWhere Persistence
- AKM868 Binding
- AlarmDecoder Binding
- Anel Binding
- Arduino SmartHome Souliss Binding
- Asterisk Binding
- Astro Binding
- Autelis Pool Control Binding
- BenQ Projector Binding
- Bluetooth Binding
- Bticino Binding
- CalDAV Binding
- Chamberlain MyQ Binding
- Comfo Air Binding
- Config Admin Binding
- CUL Transport
- CUL Intertechno Binding
- CUPS Binding
- DAIKIN Binding
- Davis Binding
- DD-WRT Binding
- Denon Binding
- digitalSTROM Binding
- DIY on XBee Binding
- DMX512 Binding
- DSC Alarm Binding
- DSMR Binding
- eBUS Binding
- Ecobee Binding
- EDS OWSever Binding
- eKey Binding
- Energenie Binding
- EnOcean Binding
- Enphase Energy Binding
- Epson Projector Binding
- Exec Binding
- Expire Binding
- Fatek PLC Binding
- Freebox Binding
- Freeswitch Binding
- Frontier Silicon Radio Binding
- Fritz AHA Binding
- Fritz!Box Binding
- FritzBox-TR064-Binding
- FS20 Binding
- Garadget Binding
- Global Caché IR Binding
- GPIO Binding
- HAI/Leviton OmniLink Binding
- HDAnywhere Binding
- Heatmiser Binding
- Homematic / Homegear Binding
- Horizon Mediabox Binding
- HTTP Binding
- IEC 62056-21 Binding
- IHC / ELKO Binding
- ImperiHome Binding
- Insteon Hub Binding
- Insteon PLM Binding
- IPX800 Binding
- IRtrans Binding
- jointSPACE-Binding
- KM200 Binding
- KNX Binding
- Koubachi Binding
- LCN Binding
- LightwaveRF Binding
- Leviton/HAI Omnilink Binding
- Lg TV Binding
- Logitech Harmony Hub
- MailControl Binding
- MAX!Cube-Binding
- MAX! CUL Binding
- MCP23017 I/O Expander Binding
- MCP3424 ADC Binding
- MiLight Binding
- MiOS Binding
- Mochad X10 Binding
- Modbus Binding
- MPD Binding
- MQTT Binding
- MQTTitude binding
- MystromEcoPower Binding
- Neohub Binding
- Nest Binding
- Netatmo Binding
- Network Health Binding
- Network UPS Tools Binding
- Nibe Heatpump Binding
- Nikobus Binding
- Novelan/Luxtronic Heatpump Binding
- NTP Binding
- One-Wire Binding
- Onkyo AV Receiver Binding
- Open Energy Monitor Binding
- OpenPaths presence detection binding
- OpenSprinkler Binding
- OSGi Configuration Admin Binding
- Panasonic TV Binding
- panStamp Binding
- Philips Hue Binding
- Picnet Binding
- Piface Binding
- PiXtend Binding
- pilight Binding
- Pioneer-AVR-Binding
- Plex Binding
- Plugwise Binding
- PLCBus Binding
- PowerDog Local API Binding
- Powermax alarm Binding
- Primare Binding
- Pulseaudio Binding
- Raspberry Pi RC Switch Binding
- RFXCOM Binding
- RWE Smarthome Binding
- Sager WeatherCaster Binding
- Samsung AC Binding
- Samsung TV Binding
- Serial Binding
- Sallegra Binding
- Satel Alarm Binding
- Siemens Logo! Binding
- SimpleBinary Binding
- Sinthesi Sapp Binding
- Smarthomatic Binding
- Snmp Binding
- Somfy URTSI II Binding
- Sonance Binding
- Sonos Binding
- Souliss Binding
- Squeezebox Binding
- Stiebel Eltron Heatpump
- Swegon ventilation Binding
- System Info Binding
- TA CMI Binding
- TCP/UDP Binding
- Tellstick Binding
- TinkerForge Binding
- Tivo Binding
- UCProjects.eu Relay Board Binding
- UPB Binding
- VDR Binding
- Velleman-K8055-Binding
- Wago Binding
- Wake-on-LAN Binding
- Waterkotte EcoTouch Heatpump Binding
- Weather Binding
- Wemo Binding
- Withings Binding
- XBMC Binding
- xPL Binding
- Yamahareceiver Binding
- Zibase Binding
- Z-Wave Binding
- Asterisk
- DoorBird
- FIND
- Foscam IP Cameras
- LG Hombot
- Worx Landroid
- Heatmiser PRT Thermostat
- Google Calendar
- Linux Media Players
- Osram Lightify
- Rainforest EAGLE Energy Access Gateway
- Roku Integration
- ROS Robot Operating System
- Slack
- Telldus Tellstick
- Zoneminder
- Wink Hub (rooted)
- Wink Monitoring
- openHAB Cloud Connector
- Google Calendar Scheduler
- Transformations
- XSLT
- JSON
- REST-API
- Security
- Service Discovery
- Voice Control
- BritishGasHive-Using-Ruby
- Dropbox Bundle
A good source of inspiration and tips from users gathered over the years. Be aware that things may have changed since they were written and some examples might not work correctly.
Please update the wiki if you do come across any out of date information.
- Rollershutter Bindings
- Squeezebox
- WAC Binding
- WebSolarLog
- Alarm Clock
- Convert Fahrenheit to Celsius
- The mother of all lighting rules
- Reusable Rules via Functions
- Combining different Items
- Items, Rules and more Examples of a SmartHome
- Google Map
- Controlling openHAB with Android
- Usecase examples
- B-Control Manager
- Spell checking for foreign languages
- Flic via Tasker
- Chromecast via castnow
- Speedtest.net integration