Skip to content

v2_CN_BandwidthTestTool

winlin edited this page Jan 6, 2022 · 6 revisions

HOME > CN > Bandwidth Test

带宽测试

视频很卡,播放不了,缓冲区突然很大,推流上不来,都有可能是带宽过低,SRS支持测试客户端到服务器的带宽。

SRS配置

SRS配置一般是单独加一个vhost支持测速。SRS的配置conf/bandwidth.conf。譬如:

listen              1935;
vhost __defaultVhost__ {
}

vhost bandcheck.srs.com {
    enabled         on;
    chunk_size      65000;
    bandcheck {
        enabled         on;
        key             "35c9b402c12a7246868752e2878f7e0e";
        interval        30;
        limit_kbps      4000;
    }
}

其中:

  • key:服务器的key,若客户端给出的key和配置的不一致,断开连接。
  • interval:测速的间隔,单位为秒,可为小数。若连续发起测速,时间间隔小于interval,服务器拒绝连接。
  • limit_kbps:测速的最大带宽,即可以测出来的最大带宽,防止服务器收到攻击。

假设服务器的IP是:192.168.1.170

Flash测速工具

启动后用带宽测试客户端就可以查看:http://ossrs.net/srs.release/trunk/research/players/srs_bwt.html?server=192.168.1.170

备注:请将所有实例的IP地址192.168.1.170都换成部署的服务器IP地址。

检测完毕后会提示带宽,譬如:

检测结束: 192.168.1.170 上行: 1965 kbps 下行: 3631 kbps 测试时间: 6.0 秒
server:SRS 0.9.156 (github.com/ossrs/srs), 
authors:winlin,wenjie.zhao, srs_id:123, srs_pid:32057, ip:192.168.1.170

测速库

我提供了AS和JS的库,可以直接调用来和服务器测速。

AS的库,直接拷贝文件SrsBandwidth.as到工程,调用即可(参考注释说明):

JS的库,需要拷贝srs_bwt.swfsrs.bandwidth.js,调用方法参考js说明:

备注:JS需要调用swf导出的js函数,由Flash发送RTMP包测速,因此js库依赖于as。可以导入Flex工程自己编译,或者使用已经编译好的srs_bwt.swf

Linux工具测速

另外,SRS还提供了带宽检测命令行工具:

[winlin@dev6 srs]$ cd objs/research/librtmp/
[winlin@dev6 librtmp]$ ./srs_bandwidth_check 
RTMP bandwidth check/test with server.
Usage: ./srs_bandwidth_check <rtmp_url>
   rtmp_url     RTMP bandwidth url to check. format: rtmp://server:port/app?key=xxx,vhost=xxx
For example:
   ./srs_bandwidth_check rtmp://127.0.0.1:1935/app?key=35c9b402c12a7246868752e2878f7e0e,vhost=bandcheck.srs.com
   ./srs_bandwidth_check rtmp://127.0.0.1:1935/app?key=35c9b402c12a7246868752e2878f7e0e,vhost=bandcheck.srs.com>/dev/null
@remark, output text to stdout, while json to stderr.

直接执行将打印文本和json信息:

[winlin@dev6 librtmp]$ ./srs_bandwidth_check rtmp://127.0.0.1:1935/app?key=35c9b402c12a7246868752e2878f7e0e,vhost=bandcheck.srs.com
RTMP bandwidth check/test with server.
srs client librtmp library.
version: 0.9.158
bandwidth check/test url: rtmp://127.0.0.1:1935/app?key=35c9b402c12a7246868752e2878f7e0e,vhost=bandcheck.srs.com
simple handshake success
connect vhost/app success
bandwidth check/test success

SRS 0.9.158 (github.com/ossrs/srs), winlin,wenjie.zhao
127.0.0.1, 0.9.158, srs_pid=15264, srs_id=107
duration: 6395ms(3165+3148)
play: 3578kbps
publish: 4035kbps

terminate with ret=0

{"code":0,
"srs_server":"SRS 0.9.158 (github.com/ossrs/srs)", 
"srs_primary_authors":"winlin,wenjie.zhao", 
"srs_server_ip":"127.0.0.1", 
"srs_version":"0.9.158", 
"srs_pid":15264, 
"srs_id":107, 
"duration":6395, 
"play_duration":3165, 
"play_kbps":3148, 
"publish_kbps":3578}

可以只打印json信息,将stdout定向到/dev/null:

[winlin@dev6 librtmp]$ ./srs_bandwidth_check rtmp://127.0.0.1:1935/app?key=35c9b402c12a7246868752e2878f7e0e,vhost=bandcheck.srs.com>/dev/null 
{"code":0,
"srs_server":"SRS 0.9.158 (github.com/ossrs/srs)", 
"srs_primary_authors":"winlin,wenjie.zhao", 
"srs_server_ip":"127.0.0.1", 
"srs_version":"0.9.158", 
"srs_pid":15264, 
"srs_id":109, 
"duration":6354, 
"play_duration":3092, 
"play_kbps":3177, 
"publish_kbps":3662}

Winlin 2014.11

Welcome to SRS wiki!

SRS 5.0 wiki

Please select your language:

SRS 4.0 wiki

Please select your language:

SRS 3.0 wiki

Please select your language:

SRS 2.0 wiki

Please select your language:

SRS 1.0 wiki

Please select your language:

Clone this wiki locally