-
Notifications
You must be signed in to change notification settings - Fork 8
3. "Hello World" Tutorial
This tutorial is actually a bit more than "just" the classical "Hello World". It contains six small sub-tutorials to get you started:
- Classical "Hello World" using the Welcome-Screen
- Add a new menu-item and show an "About & Help" menu
- Add two menu-items: Flip the joystick ports and mute the siren
- Add three menu items to change the color of the "ball"
- Filter files: Only show
*.txt
files in the file browser - Understanding the QNICE debug console
[@lydon: Here we could advertize your YouTube video]
Please make sure that you have completed the First Steps before
proceeding with the tutorials shown here. Use the MyFirstM2M
clone you made
there for the following exercises.
By default, the Welcome-Screen is shown after power-on (and/or loading the
core, respectively) and after each reset. You can configure this behavior in
the file CORE/vhdl/config.vhd
:
-- show the welcome screen in general
constant WELCOME_ACTIVE : boolean := true;
-- shall the welcome screen also be shown after the core is reset?
-- (only relevant if WELCOME_ACTIVE is true)
constant WELCOME_AT_RESET : boolean := true;
For now, do not change anything here, yet, because we want to use the Welcome-Screen to show our "Hello World" message.
Search for the constant SCR_WELCOME
in config.vhd
. You will notice that
this is quite a long, multi-line string constant. You will recognize the
contents of the Welcome-Screen that the demo-core is showing. Please be
aware that you can and need to use \n
to add newlines so that you can format
your welcome screen.
Go to the lines that contains this segment:
"\n\nEdit config.vhd to modify welcome screen.\n\n" &
"You can for example show the keyboard map.\n" &
"Look at this example from Game Boy Color:\n\n\n" &
Replace the segment with your personal "Hello World!" message for example:
"\n\nHello World! Hello M2M! Hello MEGA65!\n\n\n\n" &
Generate a bitstream and run the core.
After that, you might want to set the above-mentioned flags to false
so that
the Welcome-Screen disappears completely: It will neither be shown upon the
initial startup of the core then nor will it be shown after a reset.
This mini-tutorial catches two birds with one stone:
- You'll get a first sense for how the on-screen-menu works
- You'll understand the help-system
M2M contains a help-system that allows you to have up to 15 help topics, where each help topic can have 256 screens. Let's add a menu item that shows some demo help content.
Search for the constant OPTM_SIZE
in config.vhd
and change its value
from 25
to 27
.
Add this to the string constant OPTM_ITEMS
before the "Close Menu" item:
" About & Help\n" &
"\n" &
The string constant should now look like this:
constant OPTM_ITEMS : string :=
" Demo Headline A\n" &
"\n" &
" Item A.1\n" &
" Item A.2\n" &
" Item A.3\n" &
" Item A.4\n" &
"\n" &
" HDMI Frequency\n" &
"\n" &
" 50 Hz\n" &
" 60 Hz\n" &
"\n" &
" Drives\n" &
"\n" &
" Drive X:%s\n" &
" Drive Y:%s\n" &
" Drive Z:%s\n" &
"\n" &
" Another Headline\n" &
"\n" &
" HDMI: CRT emulation\n" &
" HDMI: Zoom-in\n" &
" Audio improvements\n" &
"\n" &
" About & Help\n" &
"\n" &
" Close Menu\n";
Now go to this block of constants:
constant OPTM_G_Demo_A : integer := 1;
constant OPTM_G_HDMI : integer := 2;
constant OPTM_G_Drive_X : integer := 3;
constant OPTM_G_Drive_Y : integer := 4;
constant OPTM_G_Drive_Z : integer := 5;
constant OPTM_G_CRT : integer := 6;
constant OPTM_G_Zoom : integer := 7;
constant OPTM_G_Audio : integer := 8;
And add one more:
constant OPTM_G_AboutHelp : integer := 9;
After that, locate the constant OPTM_GROUPS
and add two more line items
right before this block:
OPTM_G_LINE, -- Line
OPTM_G_CLOSE -- Close Menu
);
The line items that you should add are these:
OPTM_G_LINE, -- Line that separates the Help menu
OPTM_G_AboutHelp + OPTM_G_HELP, -- Show help topic #1
As a result, OPTM_GROUPS
will look like this:
constant OPTM_GROUPS : OPTM_GTYPE := ( OPTM_G_TEXT + OPTM_G_HEADLINE, -- Headline "Demo Headline"
OPTM_G_LINE, -- Line
OPTM_G_Demo_A + OPTM_G_START, -- Item A.1, cursor start position
OPTM_G_Demo_A + OPTM_G_STDSEL, -- Item A.2, selected by default
OPTM_G_Demo_A, -- Item A.3
OPTM_G_Demo_A, -- Item A.4
OPTM_G_LINE, -- Line
OPTM_G_TEXT, -- Headline "HDMI Frequency"
OPTM_G_LINE, -- Line
OPTM_G_HDMI + OPTM_G_STDSEL, -- 50 Hz, selected by default
OPTM_G_HDMI, -- 60 Hz
OPTM_G_LINE, -- Line
OPTM_G_TEXT, -- Headline "Drives"
OPTM_G_LINE, -- Line
OPTM_G_Drive_X + OPTM_G_MOUNT_DRV, -- Drive X
OPTM_G_Drive_Y + OPTM_G_MOUNT_DRV, -- Drive Y
OPTM_G_Drive_Z + OPTM_G_MOUNT_DRV, -- Drive Z
OPTM_G_LINE, -- Line
OPTM_G_TEXT, -- Headline "Another Headline"
OPTM_G_LINE, -- Line
OPTM_G_CRT + OPTM_G_SINGLESEL, -- On/Off toggle ("Single Select")
OPTM_G_Zoom + OPTM_G_SINGLESEL, -- On/Off toggle ("Single Select")
OPTM_G_Audio + OPTM_G_SINGLESEL, -- On/Off toggle ("Single Select")
OPTM_G_LINE, -- Line that separates the Help menu
OPTM_G_AboutHelp + OPTM_G_HELP, -- Show help topic #1
OPTM_G_LINE, -- Line
OPTM_G_CLOSE -- Close Menu
);
Please note that the items in OPTM_GROUPS
are having a 1-to-1 relationship
to each line (separated by \n
) in OPTM_ITEMS
. Also please note that
OPTM_ITEMS
now has 27
lines and OPTM_GROUPS
has 27
array elements,
just as specified by OPTM_SIZE
.
That's it! You now have an "About & Help" menu item that opens demo content that is three screens long.
Try it: Generate a bitstream and play with it. You can open the "About & Help" menu using Return and you can browse through the multiple help pages using Cursor Left and Cursor Right. Press Space to close the help menu.
You will find a more in-depth description of how the Shell's menu system works here @TODO and all details about the help-system here @TODO. Nevertheless, here is the condensed overview:
-
OPTM_ITEMS
defines the names of the menu items andOPTM_GROUPS
defines the properties and behaviour of the menu items. There is a 1-to-1 relationship between both: A line inOPTM_ITEMS
corresponds to an array element inOPTM_GROUPS
. - Empty lines in
OPTM_ITEMS
will be shown as lines, when the corresponding entry inOPTM_GROUPS
is set toOPTM_G_LINE
. - Each menu item that is supposed to "do something" needs to be part of a
"Menu Group". This is why you defined the constant
OPTM_G_AboutHelp
while following the recipe above. - Multi-select menu items need all to be in the same Menu Group. See how all
the "Item A.*" menu items are part of
OPTM_G_Demo_A
. - Single-select menu items - such as the help menu item - need to have a
unique identifier ("Group"). This is why you gave your constant
OPTM_G_AboutHelp
the unique value9
. - Attributes and properties can be added to Menu Groups using the
+
operator because the values are arranged in a way that the Shell can recognize single bits. This is why you added theOPTM_G_HELP
attribute to theOPTM_G_AboutHelp
menu item identifier. - The help system counts: The first menu item that has a
OPTM_G_HELP
attribute will show the first help topic. The second menu item that has aOPTM_G_HELP
attribute will show the second help topic, and so on. The various help menu items do not need to be in proximity. - The example
config.vhd
file provided with M2M contains a three-page (three-screen) demo help topic. This tutorial does not explain more details how the help-system itself works, but you can look at the constantsWHS_DATA
andWHS
to get a first overview or go to the reference page @TODO to learn more.
Now we are ready to add two menu items that change the actual state of the core: The first one will flip the joystick ports. The demo core's "BreakOut paddle" can not only be controlled by the cursor keys Left and Right but they can be also controlled by a joystick that sits in port #1. If you did not try this, yet, please do right now. After that, connect your joystick to port #2 and see how it is not working. We will fix that with our new menu-item.
The second menu item that we will add will be used to toggle the siren. By default it will be on so that the siren will be on. The flip joystick ports menu item will be off by default; so we will also learn how to work with default values.
If you followed the mini tutorial above, then you already know the trick
of how to add menu items to OPTM_ITEMS
and OPTM_GROUPS
. Let's get started:
Here are two new constants for our list of Menu Group constants:
constant OPTM_G_FlipJoys : integer := 10;
constant OPTM_G_Siren : integer := 11;
You can highlight headlines or sections in the menu using the
OPTM_G_HEADLINE
attribute. Let's do that and create a completely new
section at the very top of the menu directly after the first stand-alone
"\n" (after " Demo Headline A\n"). Make sure that the first 10 lines of
OPTM_ITEMS
look like this:
constant OPTM_ITEMS : string :=
" Demo Headline A\n" &
"\n" &
" My Switches\n" &
"\n" &
" Flip Joysticks\n" &
" Siren\n" &
"\n" &
" Item A.1\n" &
" Item A.2\n" &
" Item A.3\n" &
What we did: We added a headline called "My Switches" that is embedded between two new-lines ("empty lines"). We will make sure that these empty lines will be displayed as lines. We will also make sure that the headline "My Switches" will be displayed differently than the rest of the menu.
Before we proceed, let's count how many lines we added: We added five new
lines, starting with "My Switches" and ending with "\n". So let's update
OPTM_SIZE
:
constant OPTM_SIZE : natural := 32; -- amount of items including empty lines:
Last-but-not least, we need to define the semantics. Make sure that the first
10 lines of OPTM_GROUPS
look like this:
constant OPTM_GROUPS : OPTM_GTYPE := ( OPTM_G_TEXT + OPTM_G_HEADLINE, -- Headline "Demo Headline"
OPTM_G_LINE, -- Line
OPTM_G_HEADLINE, -- Headline "My Switches"
OPTM_G_LINE, -- Line
OPTM_G_FlipJoys + OPTM_G_SINGLESEL -- Single select item: Flip joysticks; not selected by default
OPTM_G_Siren + OPTM_G_SINGLESEL + OPTM_G_STDSEL -- Single select item: Siren; selected by default
OPTM_G_LINE, -- Line
OPTM_G_Demo_A + OPTM_G_START, -- Item A.1, cursor start position
OPTM_G_Demo_A + OPTM_G_STDSEL, -- Item A.2, selected by default
OPTM_G_Demo_A, -- Item A.3
A single-select menu item is being created by using OPTM_G_SINGLESEL
, and
adding OPTM_G_STDSEL
makes sure that a menu item is on by
default.
Synthesize the core, run it and check - using the Help key - that the menu is showing the expected menu items. As soon as this is successful, please continue with the next steps.
The user's menu choices are available in real-time in mega65.vhd
via the
register qnice_osm_control_i
, which is an input port to mega65.vhd
:
-- On-Screen-Menu selections
qnice_osm_control_i : in std_logic_vector(255 downto 0);
The prefix qnice_
means, that this signal / register is in the
"Clock Domain" of the QNICE System-on-a-Chip. At this moment you neither
need to understand what a "Clock Domain"
(or what Clock Domain Crossing (CDC)) actually is, nor do you need to
fully understand how QNICE works. The only important thing for now to know
right now is:
- Always connect signals of the same clock domain with each other.
- Do not connect signals of different clock domains with each other.
In our very example this means: It is no problem to wire qnice_osm_control_i
to the flip-joystick-port signal called qnice_flip_joyports_o
. But it
would be a problem, if you propagated qnice_osm_control_i
into for example
main.vhd
that runs in the core's clock domain, and used it there. (Actually
it is not difficult to do that, if you work out the
Clock Domain Crossing (CDC), but for now, just ignore this and continue
with the tutorial's track.)
Go back to the file config.vhd
and count (starting from zero) where the
two menu items we added are located. You need to count each line of
OPTM_ITEMS
including text-only items and empty lines. After that, create
two constants in mega65.vhd
that contain the position. Don't forget to
adjust the positions of the other, already existing demo-core menu items: They
changed when you added your new menu items. When you are done, the
section -- Democore menu items
in mega65.vhd
should look like this:
-- Democore menu items
constant C_MENU_FLIPJOYS : natural := 2;
constant C_MENU_SIREN : natural := 3;
constant C_MENU_HDMI_60HZ : natural := 15;
constant C_MENU_CRT_EMULATION : natural := 25;
constant C_MENU_HDMI_ZOOM : natural := 26;
constant C_MENU_IMPROVE_AUDIO : natural := 27;
Now let's make sure that M2M is informed about the user's intention to flip
the joystick ports; then M2M will do the rest for you. The
qnice_osm_control_i
contains this information at position C_MENU_FLIPJOYS
so all we need to do is is to change this code here
-- Flip joystick ports (i.e. the joystick in port 2 is used as joystick 1 and vice versa)
qnice_flip_joyports_o <= '0';
into this code here:
-- Flip joystick ports (i.e. the joystick in port 2 is used as joystick 1 and vice versa)
qnice_flip_joyports_o <= qnice_osm_control_i(C_MENU_FLIPJOYS);
Next, let's make sure that the siren can be muted. Find the line that assigns
a zero to qnice_audio_mute_o
and change it to this code:
qnice_audio_mute_o <= not qnice_osm_control_i(C_MENU_SIREN);
We are using not
because the semantics is: If the Siren menu item is on
then the siren should be audible.
Done. Pretty elegant, isn't it? Make a bitstream, run it and test it.
@TODO @TODO @TODO
@TODO @TODO @TODO
@TODO @TODO @TODO
@TODO @TODO @TODO
@TODO @TODO @TODO
@TODO @TODO @TODO