Bill of Materials (6 and 8 Bit Boards)
This page lists the parts needed for the Six Bit (Issue 2) or 6/8 Bit (Issue 3) version of RGBtoHD (by IanB)
The latest schematics are here:
The latest gerbers are here:
| Part Description | Supplier | Quantity | Part Ref | Min Order | Notes |
|---|---|---|---|---|---|
| 1K 0805 Resistor | RS 740‑9063 | 5 or 6 off | R1-5, R7 | 50 | R7 for 6/8 BIT ISSUE 3 BOARD ONLY (Should be installed to indicate full 8 bit header fitted) |
| 10K 0805 Resistor | RS 740‑9072 | 1 off | R6 | 50 | |
| OPTION A: Bourns 4605X-101-472LF 4K7 x 4 Resistor Network | Farnell 9356100 | 2 off | RN1-2 | 1 | SIX BIT ISSUE 2 BOARD ONLY |
| OPTION B: Bourns 4606X-101-472LF 4K7 x 5 Resistor Network | Farnell 9356240 | 2 off | RN1-2 | 1 | 6/8 BIT ISSUE 3 BOARD ONLY (Must be fitted even if fitting 6 bit header on 8 bit board) |
| Part Description | Supplier | Quantity | Part Ref | Min Order | Notes |
|---|---|---|---|---|---|
| 10uF 0805 Multilayer Ceramic Capacitor | RS 846‑7313 | 1 off | C1 | 50 | working voltage ≥ 10V |
| 100nf 0805 Multilayer Ceramic Capacitor | RS 464‑6688 | 3 off | C2-C4 | 50 | working voltage ≥ 10V |
| Part Description | Supplier | Quantity | Part Ref | Min Order | Notes |
|---|---|---|---|---|---|
| XC9572XL-10VQG44C | Farnell 2831287 Alt: Farnell 2984660 | 1 off | U1 | 1 | Digikey or Mouser also stock them |
| 3mm Green LED | Farnell 1142509 | 2 off | D1-2 | 5 |
| Part Description | Supplier | Quantity | Part Ref | Min Order | Notes |
|---|---|---|---|---|---|
| 2x20 way 0.1" female PCB header | Farnell 2827916 | 1 off | P1 | 1 | |
| OPTION A: Samtec TSW-105-08-L-D-RA 2x5 way 0.1" male right angle PCB Header | RS 767-0915 | 1 off | P2 | 1 | Fit on 6/8 Bit Issue 3 Board for 6 bit support. Always fit on Six Bit Issue 2 Board. |
| OPTION B: Samtec TSW-106-08-L-D-RA 2x6 way 0.1" male right angle PCB Header | RS 767-0934 | 1 off | P2 | 1 | Fit on 6/8 Bit Issue 3 Board for 8 bit support |
| 1x2 way 0.1" female PCB header | Farnell 2827907 | 1 off | P4 | 1 | cut as required |
| Samtec SLW-104-01-T-S 1x4 way female header | RS 180-0389 | 1 off | P5 | 10 |
Notes:
- P3 should not be fitted (as the Pi can program the CPLD)
- P5 is only needed if any of the extension boards such as the analog board is to be used
| Part Description | Supplier | Quantity | Part Ref | Min Order | Notes |
|---|---|---|---|---|---|
| SPST Momentary Action Tactile Switch | RS 758‑1941 Alt: RS 758-1950 Longer: RS 758-1957 | 4 off | SW1-SW4 | 20 | Cut pins flush with PCB before soldering |
| Black Plastic Protective Case for Raspberry Pi Zero | Ebay (If this link is sold out, search for the description to the left as there are multiple sellers) | 1 off | 1 | Also available from China at a cheaper price e.g. Ebay | |
| 11mm M2.5 threaded spacers | CPC PC01982 or Farnell 2494583 | 2 off | 1 or 10 | File about 0.5mm off the ends |
Drilling Template for above case
| Part Description | Supplier | Quantity | Min Order | Notes |
|---|---|---|---|---|
| OPTION A: 10 way cable mounting IDC socket with strain relief | Farnell 2215247 | 1 off | 1 | Use if 6 bit header fitted |
| OPTION B: 12 way cable mounting IDC socket with strain relief | Farnell 2215248 | 1 off | 1 | Use if 8 bit header fitted |
| 10 way IDC cable | Farnell 2628362 | 1m | 1m | 50cm or less recommended, 1m max |
| 6 way DIN plug | CPC CN00039 | 1 off | 1 |