Skip to content

Bill of Materials (Atom Board)

David Banks edited this page Dec 23, 2024 · 44 revisions

Introduction

This is a bill of materials for the Atom Video to HDMI Adapter with predominantly digikey part numbers (thanks to John Kortink for these)

Latest schematics are here:

Note the 6 bit board combined with the analog board will also work with the Atom but DIY construction of this board might be easier at it is mostly through-hole.

Resistors

All resistors are standard metal film (0.3W or 0.6W) 1%

Part Description Supplier Quantity Part Ref Notes
100R 13-MFR-25FRF52-100RCT-ND
MFR-25FRF52-100R
RES 100 OHM 1% 1/4W AXIAL
1 R1
330R 13-MFR-25FRF52-330RCT-ND
MFR-25FRF52-330R
RES 330 OHM 1% 1/4W AXIAL
2 R23-24
430R 13-MFR-25FRF52-430RCT-ND
MFR-25FRF52-430R
RES 430 OHM 1% 1/4W AXIAL
1 R7
470R 13-MFR-25FRF52-470RCT-ND
MFR-25FRF52-470R
RES 470 OHM 1% 1/4W AXIAL
10 R8-9,R12-19
1K0 13-MFR-25FRF52-1KCT-ND
MFR-25FRF52-1K
RES 1K OHM 1% 1/4W AXIAL
1 R6
1K1 13-MFR-25FRF52-1K1CT-ND
MFR-25FRF52-1K1
RES 1.1K OHM 1% 1/4W AXIAL
2 R2,4
5K6 13-MFR-25FRF52-5K6CT-ND
MFR-25FRF52-5K6
RES 5.6K OHM 1% 1/4W AXIAL
1 R10
7K5 13-MFR-25FRF52-7K5CT-ND
MFR-25FRF52-7K5
RES 7.5K OHM 1% 1/4W AXIAL
2 R3,5
10K 13-MFR-25FRF52-10KCT-ND
MFR-25FRF52-10K
RES 10K OHM 1% 1/4W AXIAL
3 R20-22
12K 13-MFR-25FRF52-12KCT-ND
MFR-25FRF52-12K
RES 12K OHM 1% 1/4W AXIAL
1 R11
1K Preset 3386P-102LF-ND
3386P-1-102LF
TRIMMER 1K OHM 0.5W PC PIN TOP
2 RV1-2 check footprint
matches Bourns 3386P
if substituting

Capacitors

Part Description Supplier Quantity Part Ref Notes
27pF ceramic 2 C2-3 not normally fitted
47nF multilayer ceramic 56-K473K15X7RF5UH5CT-ND
K473K15X7RF5UH5
CAP CER 0.047UF 50V X7R RADIAL
2 C5-6 5mm pin spacing
100nF multilayer ceramic BC2665CT-ND
K104K10X7RF5UH5
CAP CER 0.1UF 50V X7R RADIAL
4 C1,7-8,18 5mm pin spacing
100nF multilayer axial ceramic BC5250CT-ND
A104M15X7RF5TAA
CAP CER 0.1UF 50V X7R AXIAL
3 C10-12
100nF 0805 multilayer ceramic Farnell 1907331 3 C9,14-15 min order 5
10uF >16V electrolytic Farnell 2917914 4 C4,13,16-17 min order 5

Note: C2-3 (on the schematic) do not normally need to be fitted. They are marked as NF on the PCB.

Semiconductors

Part Description Supplier Quantity Part Ref Notes
SN74LVC1G66DBV 296-13253-1-ND
SN74LVC1G66DBVR
IC SWITCH SPST-NOX1 10OHM SOT23
1 U1 needs to be SOT-23 package
LM319N LM319NNS/NOPB-ND
LM319N/NOPB
IC COMPARATOR 2 GEN PUR 14DIP
3 U2-4 TI or ST preferred
XC9572XL-10VQG44C 122-1448-ND
XC9572XL-10VQG44C
IC CPLD 72MC 10NS 44VQFP
1 U5
LE33CZ 497-4258-1-ND
LE33CZ-TR
IC REG LINEAR 3.3V 100MA TO92-3
1 U6
3mm Green LED 516-HLMP-Y802-F0000-ND
HLMP-Y802-F0000
LED GREEN CLEAR T-1 T/H
2 D1-2

Sockets / Connectors

Part Description Supplier Quantity Part Ref Notes
14 pin IC socket CPC SC06494 3
2x5 pin male box header CPC CN17031 1 J1
1x2 pin straight female 0.1" header Farnell 1668331 1 J2 min order 10
1x6 pin straight male 0.1" header Farnell 1593415 1 J3 min order 50
1x3 pin right angled male 0.1" header Farnell 2356177 1 J4 min order 10
2x20 pin straight female 0.1" header Farnell 2827916 1 J5

Note: J6-10 (on the schematic) do not need to be fitted. They are marked as NF on the PCB.

Cable Assembly

Part Description Supplier Quantity Part Ref Notes
10 way cable mounting IDC socket with strain relief Farnell 2215247 2
10 way IDC cable Farnell 2628362 1m 20cm max length recommended

Miscellaneous

Part Description Supplier Quantity Part Ref Notes
6mm tactile switch EG1833-ND
TL1105BF160Q
SWITCH TACTILE SPST-NO 0.05A 12V
3 SW1-3 9.5mm button length*
6mm tactile switch (right angle) 141-TL1105XF160QBLKSTEM-ND
TL1105XF160QBLKSTEM
SWITCH TACTILE SPST-NO 0.05A 12V
1 SW4 5.85mm button length*
Evatron EVA73G Enclosure Rapid Electronics 1
No. 2 x 6.5mm self tapping screws eBay 5

Notes: (1) Button length is measured from switch base, see data sheet.

Clone this wiki locally