Skip to content

Section 3 Assembly of the XZ Unit

Jump to bottom Edit New page
morriswinkler edited this page Nov 24, 2015 · 6 revisions

Title: "Section 3 Assembly of the XZ Unit" Description: "Welcome to the i3 Berlin building manual" Tags: [ "manual", "i3-berlin" ] date: "2015-11-24" Authors: "Bram de Vries" Slug: "Section-3-Assembly-of-the-XZ-Unit" Prev: "/manual_i3_berlin/section-2.3-assembly-of-the-y-unit-mounting-the-y-carriage-and-timing-belt" Next: "/manual_i3_berlin/section-3.1-assembly-of-the-xz-unit-mounting-the-x-axis"

/media/Section_3_0001.png

This is what you will build in this Section. Check the subsections below and have fun building!

Section 3.1: mounting the x-axis

Section 3.2: mounting the z-axis

Section 3.3: mounting the timing belt

Add a custom footer

##i3 Berlin
1 Introduction
1.1: History
1.2: Tools and Parts
1.3: Preparing the Casings

2 Assembly of the Y-Unit
2.1: Rods and Power Supply
2.2: Front- and Back- Plate
2.3: Mounting Y-Carriage and Belt

3 Assembly of the XZ-Unit
3.1: Mounting the X-Axis
3.2: Mounting the Z-Axis
3.3: Mounting the Timing Belt
3.4: Assembling the Extruder

4 Wiring
4.1: Wiring the Power Supply
4.2: Wiring the Z-Unit
4.3: Wiring the Y-Unit
4.4: Wiring the X-Axis
4.5: Gluing the Endstop Magnets
4.6: Uploading Firmware
4.7: Wiring the Extruder
4.8: Mounting the Heatbed

Cable Lengths Rumba

5 Calibration
5.1: Testing Functionality
5.2: Calibrating the Y Axis
5.3: Calibrating the X Axis
5.4: Calibrating the Print Platform

6 Printing
6.1: Filament Holder
6.2: Cura
6.3: Kisslicer
6.4: Dual Printing

Clone this wiki locally